The time has come to sell 'Leaf' my Sierra before my big move across the ditch.
It's a '93 model tin top in the dark grey colour.
Registered until June 2013
Build thread: viewtopic.php?f=4&t=19624&hilit=Leaf+the+leafy
Here's the low down:
•2 inch iron man lift kit
•2 inch body lift
•2 inch extended shackles
•31 x 10.5 r15 cooper STT's on 15 x 8 black king rims -23 offset, plus brand new full size spare (not mounted)
•rear spartan locker
•6.5:1 transfer case reduction gears
•custom transfer case cradle using rock ring and custom braced transfer case mounts
•shitty custom front toob bar
•extended front brake lines
•xxx spotties
•autotechnica sports seats
•custom raised carby hat to suit body lift
•uniden cb radio and aerial
•rola roof racks (basket in pics not included as already sold)
•Sony CD player
•auxiliary 12v outlet in the rear cargo area
•bunnings flares
•new radiator
I will also throw in any spare parts I have, including new filters, leads, spark plugs, etc.
Bad bits:
•dented rear passenger side flare
•small crease/dent in passenger side front guard
•the usual bush pin striping
I also have a fully reconditioned, partially rebuilt g13a from a '89 sierra, which has the taller block and longer stroke with original capacity of 1324cc, that can be sold with the car if negotiated or separately. It has the following work done to it:
•40 thou over bore, which should take capacity to 1361cc (I think)
•torquer cam from waggots cams
•All new gaskets, bearings and pistons
•all machine work done professionally
Block is assembled, head is assembled, Just needs someone to finish reassembling and bolt on external components
I also have a set of brand new extractors from MPH to suit the g13a
Price: $5000 ONO
Motor: $250 ONO
Extractors: $100 ONO
Contact me on 0402739586
