auszookers.com
https://auszookers.com/forum/

G16B and AW4 complete for conversion
https://auszookers.com/forum/viewtopic.php?f=7&t=38176
Page 1 of 1

Author:  16ZUK [ Mon Jan 07, 2013 10:06 pm ]
Post subject:  G16B and AW4 complete for conversion

Item: X-90 (Vitara) G16B 16V EFI engine and AW4 auto complete and running in the car

condition: Excellent, it's currently in the car and can hear running, also please see photo's and short video below to hear engine running in the car.
It has 179'000kms and runs as smooth as a swiss clock, it starts first time every time and not a single rattle even from cold and no oil leaks to be seen
The radiator has been removed as the power steer was sold from the car but it does come complete.
the engine has just had the front timing cover oil seals and timing belt replaced.

If you don't want to remove it from the car I will offer the car as it stands for the same price (please contact me from what is currently missing from the car)
everything is complete for what you need to start a conversion into a sierra eg: engine, auto, loom, computer, speedo, shifter, fuel tank, radiator and fan ect ect.

as for the X-90 it has been picked over and is missing the bonnet, power steering kit, front and rear complete diffs and suspension and the rear chassis sections with the spring saddles have been cut out.
The rest of the car is in good shape. all the electric options work and all the guards doors boot lid bumpers etc are straight.

price: $1400 O.N.O

location: Jimboomba QLD

Video of it running
Image

Image
Image
Image
Image
Image
Image

contact: Jeff 0421 154047

please call me as i don't get the chance to get on here much anymore to check pms.

photos:

Author:  Rookie_zookie [ Fri Jan 18, 2013 7:37 pm ]
Post subject:  Re: G16B and AW4 complete for conversion

Sold to me :D

Author:  Fatzook [ Fri Jan 18, 2013 11:06 pm ]
Post subject:  Re: G16B and AW4 complete for conversion

Rookie_zookie wrote:
Sold to me :D



Who is fitting this for you?

Author:  Rookie_zookie [ Sat Jan 19, 2013 8:34 am ]
Post subject:  Re: G16B and AW4 complete for conversion

Do u want the job

Author:  Fatzook [ Sat Jan 19, 2013 3:11 pm ]
Post subject:  Re: G16B and AW4 complete for conversion

I've done it a few times now :wink:

Author:  Rookie_zookie [ Sat Jan 19, 2013 4:32 pm ]
Post subject:  Re: G16B and AW4 complete for conversion

Oh nice pm me how much it will cost

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/