| auszookers.com https://auszookers.com/forum/ |
|
| Rebuilt 1.3 https://auszookers.com/forum/viewtopic.php?f=7&t=38223 |
Page 1 of 1 |
| Author: | Zuzukie [ Wed Jan 09, 2013 7:53 pm ] |
| Post subject: | Rebuilt 1.3 |
Heya Have for sale a 1.3 g13a i rebuilt at work but had a change of plans so no longer needed Has New 1mm over sized pistons with new rings to suit New bearings and thrust washers Polished crank 2nd hand reconditioned head worth $530 New genuine water pipe inlet worth $100 New water pump New timing belt, tensioner nd pulley New fan belt New plugs, leads, rotor button nd cap New carby kit installed worth $70 New oil pressure switch, temp sensor etc Machined flywheel All new seals and gaskets Prob more to list but cant think of atm I rebuilt this motor so that it would be reliable so all parts used are new or reconditioned Total cost of the rebuild is around the $1400 area Willing to let it go for $1200 Located near taree nsw Can travel to areas close by or buyer is to arrange pick up Pics will be sent by mobile so pm a number and will send some through or i can be contacted on 0422284658 |
|
| Author: | Zuzukie [ Sun Jan 13, 2013 7:49 pm ] |
| Post subject: | Re: Rebuilt 1.3 |
Bump. |
|
| Author: | Lukeszook [ Sun Jan 13, 2013 8:41 pm ] |
| Post subject: | Re: Rebuilt 1.3 |
Pictures? |
|
| Author: | Zuzukie [ Mon Jan 14, 2013 10:45 am ] |
| Post subject: | Re: Rebuilt 1.3 |
On an iphone so cant upload pics Pm a number or send me a message nd ill send pics |
|
| Author: | atari4x4 [ Mon Jan 14, 2013 10:51 am ] |
| Post subject: | Re: Rebuilt 1.3 |
photobucket app, get it. |
|
| Author: | tomtheshooter [ Mon Jan 14, 2013 12:18 pm ] |
| Post subject: | Re: Rebuilt 1.3 |
Pm sent |
|
| Author: | Zuzukie [ Mon Jan 14, 2013 5:07 pm ] |
| Post subject: | Re: Rebuilt 1.3 |
Now $1200 ono |
|
| Author: | Zuzukie [ Thu Jan 17, 2013 7:09 pm ] |
| Post subject: | Re: Rebuilt 1.3 |
Bump Open to reasonable offers |
|
| Author: | Zuzukie [ Wed Jan 30, 2013 8:07 pm ] |
| Post subject: | Re: Rebuilt 1.3 |
Now $1000 firm Need it gone |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|