Front bar
| auszookers.com https://auszookers.com/forum/ |
|
| Tyres, gearbox,rolling chassis! Want it gone https://auszookers.com/forum/viewtopic.php?f=7&t=38408 |
Page 1 of 3 |
| Author: | sjb-85 [ Thu Jan 17, 2013 2:00 pm ] |
| Post subject: | Tyres, gearbox,rolling chassis! Want it gone |
Attachment: zook2.jpg Hi GuysUnfortunately I have come to the decision to sell my zook, which i really don't wanna do but I feel it's the right decision! 1990 wide track hard top sierra, 90% complete swift gti engine conversion, only thing remaining is hook up fuel tank, it comes with a vitara efi fuel tank which I have already had the fuel filler spout into the tank modified professionally, all wiring has been professionally done by qualified auto electricians and at the same time they rebuilt my starter motor at an all up cost of $1500 and I have receipts to prove. Motor is an mk3 with Mazda rotor button and dizzy cap, which has been also professionally modified because the Mazda rotor button does not fit straight onto shaft without having a bush/grommet made up. Thermo fan is mounted to radiator but thermo is not wired up yet and it also comes with thermatic switch which will tell the thermo when to come on and off, thermatic switch is mounted and has probe installed into top radiator hose. Car does still need a new exhaust, it does come with extractors which came with the motor when I bought it but I personally wasn't going to use them as I think the quality is fairly nasty but they could be used if you wanted to save some money. Only other thing that needs doing is finding an accelerator cable to suit as standard one does not reach. Car has reduction transfer case gears (rockhopper) from what I was told when I bought the car, I'm not sure what percentage but they are very low, I also have standard transfer case as a spare Diffs have spartan lockers front and rear which are practically brand new have only been on 2 drives with these installed. Body is in excellent condition with no rust, and only a couple of dents, with the worst dent being on top of the bonnet front drivers side corner due to a tree branch falling on it. Car also has a 2" body lift installed which is also brand new have never driven the car since installing body lift which is a TSOR alloy body lift. Suspension is 2" springs and shocks from Old Man Emu, with 2" extended shackles. Has 30" muddies 5 of which are a retread muddie which still have almost full tread remaining wrapped around white sunraiser 15", I also have 5 standard rims and tyres all of which are roadworthy 2 are brand new. Interior is in good condition with passenger front seat replaced with monza racing seat, only because my brother was going to throw it out, I still have passenger front seat which has nothing wrong with it. Has also got ARB bull bar, with Narva driving lights. Might have forgotten things feel free to ask, Car is located in sth eastern suburbs Melbourne Price $4000 I can SMS pics to those who are genuinely interested or come and have a look at it. I really don't wanna sell but I feel it's the right thing, If I can find another way around selling it I probably will, I have put so much time and money into and to not be able to finish it and drive it, it really guts me! Pm me here for contact details Front diff centre with locker $300 Rear diff centre with locker $300 Transfer case with reduction gears $500 ARB bullbar $500 30" muddies on white sunraisers 5 of $600 Engine conversion kit SOLD Gearbox $500 Body lift $200 Rolling chassis and body $800 includes old man emu 2" lift |
|
| Author: | sjb-85 [ Mon Jan 21, 2013 8:12 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Negotiable |
more pics |
|
| Author: | sjb-85 [ Tue Jan 22, 2013 5:37 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Negotiable |
Guys i need this gone, make an offer!!! |
|
| Author: | sjb-85 [ Sun Feb 03, 2013 6:42 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Negotiable |
Price drop $3000 firm, car does not come with winch or uhf |
|
| Author: | sjb-85 [ Fri Feb 08, 2013 3:50 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Negotiable |
$2800 no spotties, winch, UHF or spares |
|
| Author: | flipper [ Fri Feb 08, 2013 4:09 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Negotiable |
Got any idea on price to send it to Perth? |
|
| Author: | sjb-85 [ Fri Feb 08, 2013 5:26 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Negotiable |
Sorry mate I got no idea |
|
| Author: | sjb-85 [ Mon Feb 11, 2013 9:02 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
If I part it out what are people interested in? |
|
| Author: | suzukikid [ Mon Feb 11, 2013 9:35 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
I wouldnt mind ya rear springs... |
|
| Author: | gvzookdriver [ Mon Feb 11, 2013 10:03 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
Front bar
|
|
| Author: | sjb-85 [ Mon Feb 11, 2013 11:15 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
If it goes ahead ill give you guys first dibs on those 2 items, for the springs I would be looking at getting standard ones in return as I would be looking to sell the car as a complete rolling chassis |
|
| Author: | lbzook [ Mon Feb 11, 2013 11:54 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
Winch, doors and rear diff centre if the prices are right |
|
| Author: | sjb-85 [ Mon Feb 11, 2013 12:41 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
Winch is not being sold |
|
| Author: | flipper [ Mon Feb 11, 2013 1:05 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
If you part it out would you send the motor to Perth and how much you want for it? |
|
| Author: | sjb-85 [ Mon Feb 11, 2013 2:22 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
Sorry but I would not send to Perth main reason is that I leave early in the morning and get back late a night and I'm sure that a courier company would need help lifting engine |
|
| Author: | sjb-85 [ Mon Feb 11, 2013 2:26 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
For part out to go ahead I need confirmation of major parts to be sold ie: engine, gearbox, diff centres, wheels, etc... I am trying to keep shell and chassis as one to sell as a rolling shell, am happy to sell diff centres and transfer case though |
|
| Author: | jdk81 [ Tue Feb 12, 2013 6:39 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
if you are going to part it, perhaps put a price on things so people can see what you want. I.e. how much for rolling chassis and body? doors xfer gearbox motor + loom body lift fuel tank etc |
|
| Author: | Zook101 [ Fri Feb 15, 2013 11:13 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
MAte If Your Parting it and the other guy doesnt want the front bar im Keen Also the Gearbox is it 5 speed how Much?? |
|
| Author: | sjb-85 [ Fri Feb 15, 2013 1:38 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
Sorry but doesn't look like it will be getting parted out |
|
| Author: | brandon burley [ Tue Mar 26, 2013 7:07 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
Is this still for sale? |
|
| Author: | sjb-85 [ Fri Apr 05, 2013 6:47 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, Possible part |
Now parting prices will be up later of specific items |
|
| Author: | suzukikid [ Fri Apr 05, 2013 10:13 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, parting now!!! |
How much for rear springs and drivers door? |
|
| Author: | suzukikid [ Fri Apr 05, 2013 10:15 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, parting now!!! |
And possibly passengers door is price is right |
|
| Author: | sjb-85 [ Fri Apr 05, 2013 12:36 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, parting now!!! |
I'm not selling just 2 springs and ill be keeping the shell complete unless I can't get rid of it |
|
| Author: | steve125 [ Fri Apr 05, 2013 3:56 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, parting now!!! |
If gvzookdriver and Zook101 don't want the ARB bar anymore, I'll take it. |
|
| Author: | suzukikid [ Fri Apr 05, 2013 8:07 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, parting now!!! |
Well how much for all springs? And how much ya after for the shell? Is it pretty straight? |
|
| Author: | sjb-85 [ Fri Apr 05, 2013 8:27 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, parting now!!! |
I know I'm being a pain but my plan is to just sell major items like gearbox, motor, diff centres, transfer, rolling chassis etc... That way I'm not left with random items that are no good to me or anyone else and I'm also not left with a car that can't be moved, so in saying that chassis will only be available once all major items have been sold as I will only be removing things as people want them |
|
| Author: | suzukikid [ Fri Apr 05, 2013 8:33 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, parting now!!! |
Haha fair enough... So really ya got an engine gear box and transfer for sale! Haha Also I would take ya drive shafts too how much ya want for them? |
|
| Author: | sjb-85 [ Sat Apr 06, 2013 7:16 am ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, parting now!!! |
Prices of items are in first post |
|
| Author: | suzukikid [ Sat Apr 06, 2013 7:26 pm ] |
| Post subject: | Re: 1990 WT hard top sierra F/S Vic, Pics!!!, parting now!!! |
What about drive shafts? |
|
| Page 1 of 3 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|