| auszookers.com https://auszookers.com/forum/ |
|
| Sierra mixed parts NORTHSIDE BRISBANE QLD https://auszookers.com/forum/viewtopic.php?f=7&t=38476 |
Page 1 of 1 |
| Author: | flipflop [ Sun Jan 20, 2013 8:14 pm ] |
| Post subject: | Sierra mixed parts NORTHSIDE BRISBANE QLD |
Hey, i got a few things sitting in the shed i would like to get rid of. At this point in time i am not willing to post any parts. If my prices are a little out there could let me know what a reasonable price for the item would be as i have no idea what its worth. LOCATION: North side Brisbane, Kallangur, QLD, 4503 CONTACT: Shoot me a pm or a message on 0410 427 330 i will try to reply promptly. ITEMS: 1: 3.9 third member (sierra) 2: Holden Drover guards and nose cone (guards have been chopped but not finished off) 3: WT Sierra steering box and drag links 4: Stock WT Sierra transfer case gears (removed after fitting 4.9 transfer gears) CONDITION: 1: Good condition. Back lash seems fine, teeth are good and spins fine. It has been sitting for a while. 2: OK condition. Guards have been cut to allow bigger tyres to be fitted, driver side has been finished but passenger needs little work to complete. Has rust in all the usual sierra spots (see photos). Also a dint on the driver side front corner. 3: OK condition. Steering box is a bit sloppy but does not leak and the tie rod ends are on there way out. I bought them as a spare in case i bent mine for a quick fix. 4: Good condition. Seem to be good but the counter shaft has slight wear marks (see photo). These were the gears i removed from the transfer case when i installed my 4.9 reduction gears. PRICE 1: $100 2: $50 3: $50 4: $50 PHOTOS: 1 ![]() ![]() 2 ![]() ![]() ![]() ![]() 3 ![]() 4
|
|
| Author: | Fatzook [ Sun Jan 20, 2013 8:52 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
For #5, you can throw the prop shaft and bearings in the bin. They are knackered. Case hardening is long gone. |
|
| Author: | flipflop [ Sun Jan 20, 2013 9:39 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
Thanks mate I'll turf them then. No point selling useless gear. |
|
| Author: | Fatzook [ Sun Jan 20, 2013 9:41 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
flipflop wrote: Thanks mate I'll turf them then. No point selling useless gear. They are consumable parts unfortunately. The gears may be of use to someone wanting to make a rocklobbster case from a 1L transfer. |
|
| Author: | phat [ Tue Jan 22, 2013 3:59 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
You interested in selling the steering drag links separately? |
|
| Author: | flipflop [ Tue Jan 22, 2013 5:13 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
Yer I can do that man. How about $50 for the pair sound? |
|
| Author: | flipflop [ Thu Jan 24, 2013 7:36 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
Bumpity |
|
| Author: | flipflop [ Sun Jan 27, 2013 5:17 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
Bump it to top! I want this stuff gone some make a reasonable offer and I'll probably take it. |
|
| Author: | flipflop [ Thu Jan 31, 2013 7:24 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
Bumpity!!! |
|
| Author: | toastysteve [ Fri Feb 01, 2013 8:35 am ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
Excuse my noobness, but is #1 a WT front diff? I'm chasing a rear (which I think is a 4.1 ratio?) as my crown ring and pinion gears are shagged. If this will do the job, I might be interested. |
|
| Author: | flipflop [ Fri Feb 01, 2013 8:37 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
Hillbilly sorry mate I don't have any springs man. Toastysteve it will not work for your application as its a 3.9 ratio. |
|
| Author: | want33s [ Sat Feb 02, 2013 1:26 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
No.2 is a Drover clip not Sierra. The headlight adjusters are different... |
|
| Author: | flipflop [ Sat Feb 02, 2013 4:15 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
Ok mate l'll edit it thanks for letting me know. |
|
| Author: | zukenutter [ Thu May 02, 2013 3:36 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
Still got these V V V , what's the collar teeth like on the high speed output gear like? 4: Stock WT Sierra transfer case gears |
|
| Author: | mrw82 [ Thu May 02, 2013 4:14 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
I think I have one Paul, will check for you. |
|
| Author: | flipflop [ Thu May 02, 2013 8:54 pm ] |
| Post subject: | Re: Sierra mixed parts NORTHSIDE BRISBANE QLD |
They seem fine to but I will take a better photo tomorrow and put it up for man. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|