It is currently Mon Jul 13, 2026 8:27 am
Board index » Shift It And Find It » Getting rid of stuff



Post new topic Reply to topic  [ 9 posts ] 
Author Message

Offline

Joined: Fri Sep 18, 2009 11:30 pm
Posts: 131
Location: Liverpool, NSW
Vehicle: Sierra 1992 1.6L

Post Posted: Mon Jan 21, 2013 4:21 pm 
Reply with quote Top  
Time to clean out some unwated parts

All parts located Penrith area

All Prices ONO

1) Vitara 5 Speed gearbox with Transfer $200
2) Sierra 5 speed gear box $50
3) Sierra 1.3L Head $20
4) WT Front Diff (Complete) $50
5) WT Rear Diff Center (welded) $50 sold pending payment
6) Sierra 1.3L Carby and Manifold $150
7) Sierra WT Transfer $50
8} Vitara front Diff including CV's $100


CONDITION

1) Came from a wreck with 120K on clock, never drove it, Turns nice and smooth by hand
2) Running fine when removed from car
3) Engine blew head gasket and chipped piston but head looks fine
4) In parts needs seal kit- No brakes or locking hubs
5) Welded center only- Bought but never used
6) Running fine when taken off motor
7) Damaged thread on front output shaft, otherwise was running fine when pulled from car
8} Alloy housing came from 96 1.6L LWB,Came from same car as gearbox


Prefer Pick up on all parts as most are large or heavy so postage would be huge $$$$$$$$


Last edited by barney7779 on Tue Jan 22, 2013 3:29 pm, edited 2 times in total.
 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Post Posted: Mon Jan 21, 2013 4:34 pm 
Reply with quote Top  
# [8] will be alloy unless it's been swapped out by a previous owner, if it's steel i'll take if for $100 & i'll work out how to get it freighted to SA at my expense.

can you pm me pics of the front diff

_________________
You're just hating because you don't understand

 Profile WWW  

Offline

Joined: Fri Sep 18, 2009 11:30 pm
Posts: 131
Location: Liverpool, NSW
Vehicle: Sierra 1992 1.6L

Post Posted: Mon Jan 21, 2013 4:42 pm 
Reply with quote Top  
Will Try and get over tomorrow and check it , been a while since i looked at it and grab a few pics for ya

 Profile  

Offline

Joined: Fri Sep 18, 2009 11:30 pm
Posts: 131
Location: Liverpool, NSW
Vehicle: Sierra 1992 1.6L

Post Posted: Tue Jan 22, 2013 3:30 pm 
Reply with quote Top  
atari4x4 wrote:
# [8] will be alloy unless it's been swapped out by a previous owner, if it's steel i'll take if for $100 & i'll work out how to get it freighted to SA at my expense.

can you pm me pics of the front diff




Checked it today and it is alloy housing

 Profile  

Offline

Joined: Tue Aug 24, 2010 12:22 pm
Posts: 500
Location: north richmond

Post Posted: Thu Jan 24, 2013 4:16 pm 
Reply with quote Top  
Pmd about gear box and transfer

 Profile  

Offline

Joined: Mon Feb 18, 2013 7:26 pm
Posts: 13
Vehicle: 92 zook 1.3 lifted 37s

Post Posted: Tue Feb 19, 2013 7:54 am 
Reply with quote Top  
Hey mate I live in penrith any chance of me comin and grabbing the gearbox if u still got it cheers text me on 0432221725 Matt

 Profile  

Offline
User avatar

Joined: Wed Nov 07, 2012 8:28 am
Posts: 118
Location: Gippsland, VIC
Vehicle: 1987 Suzuki Sierra hard top

Post Posted: Tue Feb 19, 2013 9:49 am 
Reply with quote Top  
Hey Mate,

That 1.3Ltr Head You Got Does it have Valves and all that With it or is it just bare??
Would you Post ??

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Post Posted: Fri Feb 22, 2013 9:36 am 
Reply with quote Top  
barney7779 wrote:
Time to clean out some unwated parts

All parts located Penrith area

All Prices ONO

1) Vitara 5 Speed gearbox with Transfer $200
2) Sierra 5 speed gear box $50
3) Sierra 1.3L Head $20
4) WT Front Diff (Complete) $50
5) WT Rear Diff Center (welded) $50 sold pending payment
6) Sierra 1.3L Carby and Manifold $150
7) Sierra WT Transfer $50
8} Vitara front Diff including CV's $100


CONDITION

1) Came from a wreck with 120K on clock, never drove it, Turns nice and smooth by hand
2) Running fine when removed from car
3) Engine blew head gasket and chipped piston but head looks fine
4) In parts needs seal kit- No brakes or locking hubs
5) Welded center only- Bought but never used
6) Running fine when taken off motor
7) Damaged thread on front output shaft, otherwise was running fine when pulled from car
8} Alloy housing came from 96 1.6L LWB,Came from same car as gearbox


Prefer Pick up on all parts as most are large or heavy so postage would be huge $$$$$$$$



Sierra transfer still available??
Thanks,
Tim

_________________
BlueSuzy wrote:
I'm over the G16b's.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Post Posted: Thu Mar 21, 2013 5:30 pm 
Reply with quote Top  
pm sent

_________________
www.illawarrasuzuki4wdclub.webs.com

 Profile YIM  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 42 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours