| auszookers.com https://auszookers.com/forum/ |
|
| (NSW-SYD)---Sierra/Vitara Parts Clean out https://auszookers.com/forum/viewtopic.php?f=7&t=38493 |
Page 1 of 1 |
| Author: | barney7779 [ Mon Jan 21, 2013 4:21 pm ] |
| Post subject: | (NSW-SYD)---Sierra/Vitara Parts Clean out |
Time to clean out some unwated parts All parts located Penrith area All Prices ONO 1) Vitara 5 Speed gearbox with Transfer $200 2) Sierra 5 speed gear box $50 3) Sierra 1.3L Head $20 4) WT Front Diff (Complete) $50 5) WT Rear Diff Center (welded) $50 sold pending payment 6) Sierra 1.3L Carby and Manifold $150 7) Sierra WT Transfer $50 8} Vitara front Diff including CV's $100 CONDITION 1) Came from a wreck with 120K on clock, never drove it, Turns nice and smooth by hand 2) Running fine when removed from car 3) Engine blew head gasket and chipped piston but head looks fine 4) In parts needs seal kit- No brakes or locking hubs 5) Welded center only- Bought but never used 6) Running fine when taken off motor 7) Damaged thread on front output shaft, otherwise was running fine when pulled from car 8} Alloy housing came from 96 1.6L LWB,Came from same car as gearbox Prefer Pick up on all parts as most are large or heavy so postage would be huge $$$$$$$$ |
|
| Author: | atari4x4 [ Mon Jan 21, 2013 4:34 pm ] |
| Post subject: | Re: (NSW-SYD)---Sierra/Vitara Parts Clean out |
# [8] will be alloy unless it's been swapped out by a previous owner, if it's steel i'll take if for $100 & i'll work out how to get it freighted to SA at my expense. can you pm me pics of the front diff |
|
| Author: | barney7779 [ Mon Jan 21, 2013 4:42 pm ] |
| Post subject: | Re: (NSW-SYD)---Sierra/Vitara Parts Clean out |
Will Try and get over tomorrow and check it , been a while since i looked at it and grab a few pics for ya |
|
| Author: | barney7779 [ Tue Jan 22, 2013 3:30 pm ] |
| Post subject: | Re: (NSW-SYD)---Sierra/Vitara Parts Clean out |
atari4x4 wrote: # [8] will be alloy unless it's been swapped out by a previous owner, if it's steel i'll take if for $100 & i'll work out how to get it freighted to SA at my expense. can you pm me pics of the front diff Checked it today and it is alloy housing |
|
| Author: | Bennyzarb [ Thu Jan 24, 2013 4:16 pm ] |
| Post subject: | Re: (NSW-SYD)---Sierra/Vitara Parts Clean out |
Pmd about gear box and transfer |
|
| Author: | Mattszook [ Tue Feb 19, 2013 7:54 am ] |
| Post subject: | Re: (NSW-SYD)---Sierra/Vitara Parts Clean out |
Hey mate I live in penrith any chance of me comin and grabbing the gearbox if u still got it cheers text me on 0432221725 Matt |
|
| Author: | Zook101 [ Tue Feb 19, 2013 9:49 am ] |
| Post subject: | Re: (NSW-SYD)---Sierra/Vitara Parts Clean out |
Hey Mate, That 1.3Ltr Head You Got Does it have Valves and all that With it or is it just bare?? Would you Post ?? |
|
| Author: | BlueSuzy [ Fri Feb 22, 2013 9:36 am ] |
| Post subject: | Re: (NSW-SYD)---Sierra/Vitara Parts Clean out |
barney7779 wrote: Time to clean out some unwated parts All parts located Penrith area All Prices ONO 1) Vitara 5 Speed gearbox with Transfer $200 2) Sierra 5 speed gear box $50 3) Sierra 1.3L Head $20 4) WT Front Diff (Complete) $50 5) WT Rear Diff Center (welded) $50 sold pending payment 6) Sierra 1.3L Carby and Manifold $150 7) Sierra WT Transfer $50 8} Vitara front Diff including CV's $100 CONDITION 1) Came from a wreck with 120K on clock, never drove it, Turns nice and smooth by hand 2) Running fine when removed from car 3) Engine blew head gasket and chipped piston but head looks fine 4) In parts needs seal kit- No brakes or locking hubs 5) Welded center only- Bought but never used 6) Running fine when taken off motor 7) Damaged thread on front output shaft, otherwise was running fine when pulled from car 8} Alloy housing came from 96 1.6L LWB,Came from same car as gearbox Prefer Pick up on all parts as most are large or heavy so postage would be huge $$$$$$$$ Sierra transfer still available?? Thanks, Tim |
|
| Author: | jimbo_jones [ Thu Mar 21, 2013 5:30 pm ] |
| Post subject: | Re: (NSW-SYD)---Sierra/Vitara Parts Clean out |
pm sent |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|