auszookers.com
https://auszookers.com/forum/

Mini Bikes.. Genuine Honda XR50 and Chinease Z50.
https://auszookers.com/forum/viewtopic.php?f=7&t=38620		 Page 1 of 1
Author:  foolsp33d [ Mon Jan 28, 2013 3:53 pm ]
Post subject:  Mini Bikes.. Genuine Honda XR50 and Chinease Z50.
Out on a limb here... but hey..

Both bikes for $2000. obo

both ride great, XR50 has sticker kit, bar kit, 1/4 turn throttle, HD pegs, HD fork legs with new fork guides, new tapered head bearings, tall seat and includes a T4 exhaust and header. $1100

Z50(dobbler) is 50cc, lights, indicators, horn, kick and electric start. Both bikes fit in the back of a SWB sierra (tightly, but fit)
$900 and will include a set or original Z50R rims.

Both start first kick. Great fun camping or if you have lil ones (or big ones) who are into the mini's.

Melbourne Pickup is prefered, Interstate sales welcome, but you will have to organize a courier etc. payment in full is to be made in fbefore pickup for interstate sales.


Image
Image
Image
Image
Image
Image
Author:  atari4x4 [ Mon Jan 28, 2013 4:03 pm ]
Post subject:  Re: Mini Bikes.. Genuine Honda XR50 and Chinease Z50.
GLWS

i learnt to ride on a Z50J, so hard to find a good one these days, fold the bars down & it would fit in the boot of most cars. 8)
Author:  foolsp33d [ Mon Jan 28, 2013 4:11 pm ]
Post subject:  Re: Mini Bikes.. Genuine Honda XR50 and Chinease Z50.
so true Atari. Iv got a 50J im doing a resto on(have been for about 2 years in n off now) was going to swap bits off this but was more viable to keep it complete.
such great fun bikes. I know I will kick myself once they are sold :( but onto bigger and better so to speak!
Author:  want33s [ Wed Jan 30, 2013 4:18 pm ]
Post subject:  Re: Mini Bikes.. Genuine Honda XR50 and Chinease Z50.
Can the chonda be rego'd?
Author:  foolsp33d [ Wed Jan 30, 2013 8:15 pm ]
Post subject:  Re: Mini Bikes.. Genuine Honda XR50 and Chinease Z50.
it has no compliance but does have indicators and lights.. i have it on good autority from Vicroads, a non complianced Z50 frame can be complied.. so I dare say there wouldnt be much to do in having it done.
Alternatively swap all the bits from this onto a Z50J complied frame.. and hey presto!
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/