| Author |
Message |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Thu Jan 17, 2013 2:00 pm |
|
Attachment: zook2.jpg Hi Guys Unfortunately I have come to the decision to sell my zook, which i really don't wanna do but I feel it's the right decision! 1990 wide track hard top sierra, 90% complete swift gti engine conversion, only thing remaining is hook up fuel tank, it comes with a vitara efi fuel tank which I have already had the fuel filler spout into the tank modified professionally, all wiring has been professionally done by qualified auto electricians and at the same time they rebuilt my starter motor at an all up cost of $1500 and I have receipts to prove. Motor is an mk3 with Mazda rotor button and dizzy cap, which has been also professionally modified because the Mazda rotor button does not fit straight onto shaft without having a bush/grommet made up. Thermo fan is mounted to radiator but thermo is not wired up yet and it also comes with thermatic switch which will tell the thermo when to come on and off, thermatic switch is mounted and has probe installed into top radiator hose. Car does still need a new exhaust, it does come with extractors which came with the motor when I bought it but I personally wasn't going to use them as I think the quality is fairly nasty but they could be used if you wanted to save some money. Only other thing that needs doing is finding an accelerator cable to suit as standard one does not reach. Car has reduction transfer case gears (rockhopper) from what I was told when I bought the car, I'm not sure what percentage but they are very low, I also have standard transfer case as a spare Diffs have spartan lockers front and rear which are practically brand new have only been on 2 drives with these installed. Body is in excellent condition with no rust, and only a couple of dents, with the worst dent being on top of the bonnet front drivers side corner due to a tree branch falling on it. Car also has a 2" body lift installed which is also brand new have never driven the car since installing body lift which is a TSOR alloy body lift. Suspension is 2" springs and shocks from Old Man Emu, with 2" extended shackles. Has 30" muddies 5 of which are a retread muddie which still have almost full tread remaining wrapped around white sunraiser 15", I also have 5 standard rims and tyres all of which are roadworthy 2 are brand new. Interior is in good condition with passenger front seat replaced with monza racing seat, only because my brother was going to throw it out, I still have passenger front seat which has nothing wrong with it. Has also got ARB bull bar, with Narva driving lights. Might have forgotten things feel free to ask, Car is located in sth eastern suburbs Melbourne Price $4000 I can SMS pics to those who are genuinely interested or come and have a look at it. I really don't wanna sell but I feel it's the right thing, If I can find another way around selling it I probably will, I have put so much time and money into and to not be able to finish it and drive it, it really guts me! Pm me here for contact details Front diff centre with locker $300 Rear diff centre with locker $300 Transfer case with reduction gears $500 ARB bullbar $500 30" muddies on white sunraisers 5 of $600 Engine conversion kit SOLD Gearbox $500 Body lift $200 Rolling chassis and body $800 includes old man emu 2" lift
You do not have the required permissions to view the files attached to this post.
Last edited by sjb-85 on Mon Jun 03, 2013 5:32 pm, edited 6 times in total.
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Mon Jan 21, 2013 8:12 pm |
|
|
more pics
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Tue Jan 22, 2013 5:37 pm |
|
|
Guys i need this gone, make an offer!!!
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Sun Feb 03, 2013 6:42 am |
|
|
Price drop $3000 firm, car does not come with winch or uhf
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Fri Feb 08, 2013 3:50 pm |
|
|
$2800 no spotties, winch, UHF or spares
|
|
|
|
 |
flipper
Joined: Sat Jan 05, 2013 4:13 pm Posts: 53 Location: Glen Forrest WA
Vehicle: Sierra
|
 Posted: Fri Feb 08, 2013 4:09 pm |
|
|
Got any idea on price to send it to Perth?
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Fri Feb 08, 2013 5:26 pm |
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Mon Feb 11, 2013 9:02 am |
|
|
If I part it out what are people interested in?
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Mon Feb 11, 2013 9:35 am |
|
|
I wouldnt mind ya rear springs...
|
|
|
|
 |
gvzookdriver

az supporter
Joined: Mon Apr 13, 2009 11:30 pm Posts: 1833 Location: Brisbane
Vehicle: Sold zuk got a Bt50
|
 Posted: Mon Feb 11, 2013 10:03 am |
|
Front bar 
_________________ bt50 now but still love the zooks
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Mon Feb 11, 2013 11:15 am |
|
|
If it goes ahead ill give you guys first dibs on those 2 items, for the springs I would be looking at getting standard ones in return as I would be looking to sell the car as a complete rolling chassis
|
|
|
|
 |
lbzook
Joined: Tue Apr 17, 2012 7:05 pm Posts: 80
Vehicle: SWB Sierra
|
 Posted: Mon Feb 11, 2013 11:54 am |
|
|
Winch, doors and rear diff centre if the prices are right
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Mon Feb 11, 2013 12:41 pm |
|
|
|
 |
flipper
Joined: Sat Jan 05, 2013 4:13 pm Posts: 53 Location: Glen Forrest WA
Vehicle: Sierra
|
 Posted: Mon Feb 11, 2013 1:05 pm |
|
|
If you part it out would you send the motor to Perth and how much you want for it?
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Mon Feb 11, 2013 2:22 pm |
|
|
Sorry but I would not send to Perth main reason is that I leave early in the morning and get back late a night and I'm sure that a courier company would need help lifting engine
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Mon Feb 11, 2013 2:26 pm |
|
|
For part out to go ahead I need confirmation of major parts to be sold ie: engine, gearbox, diff centres, wheels, etc... I am trying to keep shell and chassis as one to sell as a rolling shell, am happy to sell diff centres and transfer case though
|
|
|
|
 |
jdk81
Joined: Sat Jul 18, 2009 11:30 pm Posts: 2372 Location: Ballarat, VIC
|
 Posted: Tue Feb 12, 2013 6:39 am |
|
|
if you are going to part it, perhaps put a price on things so people can see what you want. I.e. how much for rolling chassis and body? doors xfer gearbox motor + loom body lift fuel tank etc
|
|
|
|
 |
Zook101
Joined: Wed Nov 07, 2012 8:28 am Posts: 118 Location: Gippsland, VIC
Vehicle: 1987 Suzuki Sierra hard top
|
 Posted: Fri Feb 15, 2013 11:13 am |
|
|
MAte If Your Parting it and the other guy doesnt want the front bar im Keen Also the Gearbox is it 5 speed how Much??
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Fri Feb 15, 2013 1:38 pm |
|
|
Sorry but doesn't look like it will be getting parted out
|
|
|
|
 |
brandon burley
Joined: Fri May 25, 2012 10:26 am Posts: 41 Location: Toowoomba
Vehicle: 1988.5 tin top
|
 Posted: Tue Mar 26, 2013 7:07 am |
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Fri Apr 05, 2013 6:47 am |
|
|
Now parting prices will be up later of specific items
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Fri Apr 05, 2013 10:13 am |
|
|
How much for rear springs and drivers door?
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Fri Apr 05, 2013 10:15 am |
|
|
And possibly passengers door is price is right
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Fri Apr 05, 2013 12:36 pm |
|
|
I'm not selling just 2 springs and ill be keeping the shell complete unless I can't get rid of it
|
|
|
|
 |
steve125
Joined: Sun Sep 05, 2010 11:58 am Posts: 427 Location: Melbourne
Vehicle: LWB Sierra (assembly required)
|
 Posted: Fri Apr 05, 2013 3:56 pm |
|
|
If gvzookdriver and Zook101 don't want the ARB bar anymore, I'll take it.
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Fri Apr 05, 2013 8:07 pm |
|
|
Well how much for all springs? And how much ya after for the shell? Is it pretty straight?
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Fri Apr 05, 2013 8:27 pm |
|
|
I know I'm being a pain but my plan is to just sell major items like gearbox, motor, diff centres, transfer, rolling chassis etc... That way I'm not left with random items that are no good to me or anyone else and I'm also not left with a car that can't be moved, so in saying that chassis will only be available once all major items have been sold as I will only be removing things as people want them
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Fri Apr 05, 2013 8:33 pm |
|
|
Haha fair enough... So really ya got an engine gear box and transfer for sale! Haha
Also I would take ya drive shafts too how much ya want for them?
|
|
|
|
 |
sjb-85
Joined: Wed Apr 27, 2011 10:05 am Posts: 94 Location: Pakenham Vic
|
 Posted: Sat Apr 06, 2013 7:16 am |
|
|
Prices of items are in first post
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Sat Apr 06, 2013 7:26 pm |
|
|
|
 |
|