auszookers.com
https://auszookers.com/forum/

Sierra bits, Brisbane.
https://auszookers.com/forum/viewtopic.php?f=7&t=41659		 Page 1 of 1
Author:  boostedbrick [ Sat Jun 29, 2013 3:43 pm ]
Post subject:  Sierra bits, Brisbane.
All parts pick up only. Kingston 4114. No access to a camera, I can send pics from my phone if you really need them...

WT rear diff, NT spacing. Complete drum to drum, 3.9 center. Twin brake line type. Would seem to be in good condition, was fitted to my daily driver, no noises, backlash seemed fine. $200


Checker plate sill covers. Only look to be 1mm - 1.2mm, so not bash guards. Screw holes from when it was mounted... $25 Sold


2" rear king springs, 5 leafs in each pack. Comes with the matching shocks they were fitted with. Shocks marked "73002" $100 SOLD


4 Kumho 798 AT's, 215/70/15. on ROH Tek2 rims, as pictured below. Need some fresh paint. $150SOLD


3.7 third, 26 spline. Rebuilt at some point in the last 18months. $75SOLD


Cromo cvs/axels. Used. Some twist in one of the splines. $150SOLD


1.3 Nt transfer, handbrake type. Good condition. $125

G16B extractors, no flange. Collector has been massaged to clear engine mount on a sierra. Surface rust $40


Image
Image
Image
Author:  mrw82 [ Sat Jun 29, 2013 4:18 pm ]
Post subject:  Re: Sierra bits, Brisbane.
I'll take the cromos.
Author:  Junior_91 [ Sat Jun 29, 2013 7:41 pm ]
Post subject:  Re: Sierra bits, Brisbane.
I'll take 3.7 26 spline rear diff.
Author:  boostedbrick [ Wed Jul 03, 2013 12:20 pm ]
Post subject:  Re: Sierra bits, Brisbane.
Post updated, some bits negotiable. Make an offer.
Author:  versace [ Fri Jul 12, 2013 7:44 am ]
Post subject:  Re: Sierra bits, Brisbane.
hey mate sent u a pm give us a call to organise a time i can grab those bits
Author:  84ZooK [ Fri Jul 12, 2013 9:56 am ]
Post subject:  Re: Sierra bits, Brisbane.
Hey, where abouts in Brisbane are you?
Author:  speedyblue [ Wed Jul 31, 2013 7:52 am ]
Post subject:  Re: Sierra bits, Brisbane.
Do you have a phone number? A mate in interested in the wheels.
Author:  boostedbrick [ Wed Jul 31, 2013 10:45 am ]
Post subject:  Re: Sierra bits, Brisbane.
Add updated.
Author:  Jasonduke [ Mon Aug 12, 2013 10:34 pm ]
Post subject:  Re: Sierra bits, Brisbane.
Hay mate still got trans case can I get number so I can come pick it up does it still work ok
Author:  boostedbrick [ Mon Aug 19, 2013 11:17 am ]
Post subject:  Re: Sierra bits, Brisbane.
PM's/posts replied to. first post updated.
Author:  tmitchell [ Mon Sep 02, 2013 7:33 pm ]
Post subject:  Re: Sierra bits, Brisbane.
Hi BB,..would those extractors fit a G16A EFI motor?

Cheers,
Ted.
Author:  nemesis2187 [ Fri Sep 20, 2013 7:25 am ]
Post subject:  Re: Sierra bits, Brisbane.
Keen on the complete rear diff. PM sent
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/