It is currently Sun Jul 12, 2026 6:44 pm
Board index » Shift It And Find It » Getting rid of stuff



Post new topic Reply to topic  [ 66 posts ]  Go to page 1, 2, 3  Next
Author Message

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Thu Jan 17, 2013 2:00 pm 
Reply with quote Top  
Attachment:
zook2.jpg
Hi Guys

Unfortunately I have come to the decision to sell my zook, which i really don't wanna do but I feel it's the right decision!

1990 wide track hard top sierra, 90% complete swift gti engine conversion, only thing remaining is hook up fuel tank, it comes with a vitara efi fuel tank which I have already had the fuel filler spout into the tank modified professionally, all wiring has been professionally done by qualified auto electricians and at the same time they rebuilt my starter motor at an all up cost of $1500 and I have receipts to prove.
Motor is an mk3 with Mazda rotor button and dizzy cap, which has been also professionally modified because the Mazda rotor button does not fit straight onto shaft without having a bush/grommet made up.
Thermo fan is mounted to radiator but thermo is not wired up yet and it also comes with thermatic switch which will tell the thermo when to come on and off, thermatic switch is mounted and has probe installed into top radiator hose.

Car does still need a new exhaust, it does come with extractors which came with the motor when I bought it but I personally wasn't going to use them as I think the quality is fairly nasty but they could be used if you wanted to save some money.

Only other thing that needs doing is finding an accelerator cable to suit as standard one does not reach.

Car has reduction transfer case gears (rockhopper) from what I was told when I bought the car, I'm not sure what percentage but they are very low, I also have standard transfer case as a spare

Diffs have spartan lockers front and rear which are practically brand new have only been on 2 drives with these installed.

Body is in excellent condition with no rust, and only a couple of dents, with the worst dent being on top of the bonnet front drivers side corner due to a tree branch falling on it.

Car also has a 2" body lift installed which is also brand new have never driven the car since installing body lift which is a TSOR alloy body lift.

Suspension is 2" springs and shocks from Old Man Emu, with 2" extended shackles.

Has 30" muddies 5 of which are a retread muddie which still have almost full tread remaining wrapped around white sunraiser 15", I also have 5 standard rims and tyres all of which are roadworthy 2 are brand new.

Interior is in good condition with passenger front seat replaced with monza racing seat, only because my brother was going to throw it out, I still have passenger front seat which has nothing wrong with it.

Has also got ARB bull bar, with Narva driving lights.

Might have forgotten things feel free to ask, Car is located in sth eastern suburbs Melbourne

Price $4000


I can SMS pics to those who are genuinely interested or come and have a look at it.

I really don't wanna sell but I feel it's the right thing, If I can find another way around selling it I probably will, I have put so much time and money into and to not be able to finish it and drive it, it really guts me!

Pm me here for contact details

Front diff centre with locker $300
Rear diff centre with locker $300
Transfer case with reduction gears $500
ARB bullbar $500
30" muddies on white sunraisers 5 of $600
Engine conversion kit SOLD
Gearbox $500
Body lift $200
Rolling chassis and body $800 includes old man emu 2" lift


You do not have the required permissions to view the files attached to this post.


Last edited by sjb-85 on Mon Jun 03, 2013 5:32 pm, edited 6 times in total.
 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Mon Jan 21, 2013 8:12 pm 
Reply with quote Top  
more pics


You do not have the required permissions to view the files attached to this post.

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Tue Jan 22, 2013 5:37 pm 
Reply with quote Top  
Guys i need this gone, make an offer!!!

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Sun Feb 03, 2013 6:42 am 
Reply with quote Top  
Price drop $3000 firm, car does not come with winch or uhf

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Fri Feb 08, 2013 3:50 pm 
Reply with quote Top  
$2800 no spotties, winch, UHF or spares

 Profile  

Offline
User avatar

Joined: Sat Jan 05, 2013 4:13 pm
Posts: 53
Location: Glen Forrest WA
Vehicle: Sierra

Post Posted: Fri Feb 08, 2013 4:09 pm 
Reply with quote Top  
Got any idea on price to send it to Perth?

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Fri Feb 08, 2013 5:26 pm 
Reply with quote Top  
Sorry mate I got no idea

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Mon Feb 11, 2013 9:02 am 
Reply with quote Top  
If I part it out what are people interested in?

 Profile  

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Mon Feb 11, 2013 9:35 am 
Reply with quote Top  
I wouldnt mind ya rear springs...

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Apr 13, 2009 11:30 pm
Posts: 1833
Location: Brisbane
Vehicle: Sold zuk got a Bt50

Post Posted: Mon Feb 11, 2013 10:03 am 
Reply with quote Top  
Front bar :)

_________________
bt50 now but still love the zooks

 Profile WWW  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Mon Feb 11, 2013 11:15 am 
Reply with quote Top  
If it goes ahead ill give you guys first dibs on those 2 items, for the springs I would be looking at getting standard ones in return as I would be looking to sell the car as a complete rolling chassis

 Profile  

Offline
User avatar

Joined: Tue Apr 17, 2012 7:05 pm
Posts: 80
Vehicle: SWB Sierra

Post Posted: Mon Feb 11, 2013 11:54 am 
Reply with quote Top  
Winch, doors and rear diff centre if the prices are right

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Mon Feb 11, 2013 12:41 pm 
Reply with quote Top  
Winch is not being sold

 Profile  

Offline
User avatar

Joined: Sat Jan 05, 2013 4:13 pm
Posts: 53
Location: Glen Forrest WA
Vehicle: Sierra

Post Posted: Mon Feb 11, 2013 1:05 pm 
Reply with quote Top  
If you part it out would you send the motor to Perth and how much you want for it?

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Mon Feb 11, 2013 2:22 pm 
Reply with quote Top  
Sorry but I would not send to Perth main reason is that I leave early in the morning and get back late a night and I'm sure that a courier company would need help lifting engine

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Mon Feb 11, 2013 2:26 pm 
Reply with quote Top  
For part out to go ahead I need confirmation of major parts to be sold ie: engine, gearbox, diff centres, wheels, etc... I am trying to keep shell and chassis as one to sell as a rolling shell, am happy to sell diff centres and transfer case though

 Profile  

Offline

Joined: Sat Jul 18, 2009 11:30 pm
Posts: 2372
Location: Ballarat, VIC

Post Posted: Tue Feb 12, 2013 6:39 am 
Reply with quote Top  
if you are going to part it, perhaps put a price on things so people can see what you want.
I.e. how much for rolling chassis and body?
doors
xfer
gearbox
motor + loom
body lift
fuel tank
etc

 Profile  

Offline
User avatar

Joined: Wed Nov 07, 2012 8:28 am
Posts: 118
Location: Gippsland, VIC
Vehicle: 1987 Suzuki Sierra hard top

Post Posted: Fri Feb 15, 2013 11:13 am 
Reply with quote Top  
MAte If Your Parting it and the other guy doesnt want the front bar im Keen Also the Gearbox is it 5 speed how Much??

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Fri Feb 15, 2013 1:38 pm 
Reply with quote Top  
Sorry but doesn't look like it will be getting parted out

 Profile  

Offline

Joined: Fri May 25, 2012 10:26 am
Posts: 41
Location: Toowoomba
Vehicle: 1988.5 tin top

Post Posted: Tue Mar 26, 2013 7:07 am 
Reply with quote Top  
Is this still for sale?

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Fri Apr 05, 2013 6:47 am 
Reply with quote Top  
Now parting prices will be up later of specific items

 Profile  

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Fri Apr 05, 2013 10:13 am 
Reply with quote Top  
How much for rear springs and drivers door?

 Profile  

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Fri Apr 05, 2013 10:15 am 
Reply with quote Top  
And possibly passengers door is price is right

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Fri Apr 05, 2013 12:36 pm 
Reply with quote Top  
I'm not selling just 2 springs and ill be keeping the shell complete unless I can't get rid of it

 Profile  

Offline
User avatar

Joined: Sun Sep 05, 2010 11:58 am
Posts: 427
Location: Melbourne
Vehicle: LWB Sierra (assembly required)

Post Posted: Fri Apr 05, 2013 3:56 pm 
Reply with quote Top  
If gvzookdriver and Zook101 don't want the ARB bar anymore, I'll take it.

 Profile  

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Fri Apr 05, 2013 8:07 pm 
Reply with quote Top  
Well how much for all springs? And how much ya after for the shell? Is it pretty straight?

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Fri Apr 05, 2013 8:27 pm 
Reply with quote Top  
I know I'm being a pain but my plan is to just sell major items like gearbox, motor, diff centres, transfer, rolling chassis etc... That way I'm not left with random items that are no good to me or anyone else and I'm also not left with a car that can't be moved, so in saying that chassis will only be available once all major items have been sold as I will only be removing things as people want them

 Profile  

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Fri Apr 05, 2013 8:33 pm 
Reply with quote Top  
Haha fair enough... So really ya got an engine gear box and transfer for sale! Haha

Also I would take ya drive shafts too how much ya want for them?

 Profile  

Offline

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Post Posted: Sat Apr 06, 2013 7:16 am 
Reply with quote Top  
Prices of items are in first post

 Profile  

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Sat Apr 06, 2013 7:26 pm 
Reply with quote Top  
What about drive shafts?

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 66 posts ]  Go to page 1, 2, 3  Next

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours