2.1/4" From CAT to tip NOT including cat. $100 ONO
With High flow muffler and resonator to reduce the noise.
Has done only a few 000k's. Muddy. Been sitting in storage since removed.
Pickup Bracken Ridge
| auszookers.com https://auszookers.com/forum/ |
|
| 2.1/4" Jimny Exhaust system https://auszookers.com/forum/viewtopic.php?f=7&t=42780 |
Page 1 of 1 |
| Author: | Bugsta [ Tue Sep 03, 2013 4:02 pm ] |
| Post subject: | 2.1/4" Jimny Exhaust system |
2.1/4" From CAT to tip NOT including cat. $100 ONO With High flow muffler and resonator to reduce the noise. Has done only a few 000k's. Muddy. Been sitting in storage since removed. Pickup Bracken Ridge
|
|
| Author: | dougies_tx5turbo [ Tue Sep 03, 2013 6:16 pm ] |
| Post subject: | Re: 2.1/4" Jimny Exhaust system |
Wouldn't mind buying this exhaust. Just out of curiosity who did the exhaust? What type of muffler does it have? How much louder is it than a stock? What was the reasons for taking it off? |
|
| Author: | Bugsta [ Tue Sep 03, 2013 6:24 pm ] |
| Post subject: | Re: 2.1/4" Jimny Exhaust system |
It was made by Macs Mufflers. Aside from 'High Flow' I couldn't tell you what type of muffler. It is louder of course but quite acceptable after I made them put the resonator on. I found it a bit big for the 1.3. Would be perfect for a turbo and probably alright for a 1.8. Suitable only for extractors. |
|
| Author: | dougies_tx5turbo [ Tue Sep 03, 2013 6:28 pm ] |
| Post subject: | Re: 2.1/4" Jimny Exhaust system |
Thank you for getting back to me. I'll do some measuring tomorrow afternoon. I've got a 1.5. |
|
| Author: | Bugsta [ Fri Sep 06, 2013 8:56 pm ] |
| Post subject: | Re: 2.1/4" Jimny Exhaust system |
beepbeep |
|
| Author: | Bugsta [ Wed Sep 18, 2013 8:07 am ] |
| Post subject: | Re: 2.1/4" Jimny Exhaust system |
speed bumps |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|