| Author |
Message |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Sat Sep 21, 2013 6:10 pm |
|
Ok the time has come and the decision has been made that i want to get rid of my never ending money pit. Its a 1991 sierra hardtop. My build thread is here. viewtopic.php?t=12235The reason why im selling is i dont think ill have time to use it for what i intended. After winning the dmax from 4wd action i was going to keep this and tow it out to 4x4 parks to have fun. However i dont think ill get that much time to justify having it sit around the house and taking up space. Id rather a tinny sitting in its space. The sierra has quite a few goodies on it mostly having a fresh jap import 1.6efi vitara engine. Cannot confirm the kays but it is in very good condition. The sierra would not be roadworthy hence why im either going to strip it or sell it as whole. I think a fair price for whole would be about $4000. However im more inclined to part it out. The body is in average to poor conditon. it has bog and fibreglass in all the usual rust sections. However the whole floor pan is rust free.The bonnet and doors are rust free. I will list it for roughly 1 week as whole car then ill part it out. So $4000. 91 Sierra hardtop. Low km jap import vitara 1.6 efi Vitara vss in a sierra cluster Modded wiring loom done by an auto sparky Petroworks adaptor kit (no body lift needed) fuel system is a twin pump setup with surge tank new starter motor headlight relay upgrade starter motor relay upgrade Lukey performance extractors Whole conversion kit. This means drive away. Ill sell for $ 1650. It will come with everything needed to put into your sierra aswell as the 5 speed gearbox as the plate is bolted to it and its easier to pull it out as whole. For this engine you will be able to hear it running and if at the time be able to drive it. Depending if the car is complete and still roadworthy. However this engine will not dissapoint. It is in great condition with excellent power. If you would like the whole kit i will take a non refundable $200 deposit. As ill be removing this engine for you, once removed i will not be able to show it running to other people. Also i hate getting dicked around. 30x9.5 bighorns with 90% tread on average conditon 15x8 sunnys painted black $700 full 65mm efs suspension $650 front jml bar with all brackety $600Aldi winch $250rear custom bar with led lights tow ball and wiring plug (very strong has pulled out cruisers axle deep in mud) $300side steps sliders pretty strong. Have highlift jacked off them $150alpine headunit ipod compatible 6.5inch splits kenwood amp Sound system $100front wheelbearings were done about 3000km ago with a full swivel hub rebuild kit and kingpin bearings etc put through rear wheel bearings were done about 5000km ago Full front diff from disc to disc $300Full Rear diff drum to drum $150Transfer case $ 150Sierra boss kit $50Sierra gutter mount supercheap roof racks $40Perfect condition sierra fuel tank. no rust or leaks. $70Tail shaft $50Jackshaft $50Front shaft $50Highflow cat to a 2.5inch exhaust system through to a redback muffler $150 Spare 5 speed gearbox $150Please notify me if you want any other part not listed. will not be sold with spotties or cb radio Car is located in brisbane southside. Inspections are welcome however most likely weekends only. After one week ill throw up some prices on indvidual items. Register your interest on this page if you want to shotgun an item when i strip it. Ive taken this out a few times and every time its put a big smile on my face. I took it to a 4x4 park last year with a blown head gasket and did all the very hard tracks were listed. It is very capable. Ive pretty mush worked on everything on this bloody thing lol. So everything has been fixed up or replaced or rebuilt. I also have some spares too. A whole plastic tub full of the old complete engine bar the head and block so all the bolt on accessories etc aswell as power steering pump and aircon compressor. Also have another 5 speed gearbox. You will find photos on my build thread viewtopic.php?t=12235Please pm me or text me on 0422408290
Last edited by reeceh on Wed Dec 11, 2013 5:31 pm, edited 6 times in total.
|
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Sat Sep 21, 2013 6:27 pm |
|
|
Got rough ideas on price for parts? I'd be interested in the G16 conversion and the tyres.
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Sat Sep 21, 2013 6:30 pm |
|
|
After 1 week ill redo the ad with prices.
|
|
|
|
 |
Dcraw
Joined: Fri Sep 07, 2012 3:57 pm Posts: 112 Location: Brisbane
Vehicle: suzuki sierra
|
 Posted: Sat Sep 21, 2013 6:40 pm |
|
|
im keen on the g16b conversion, power steering and jml front bar!!!
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Sat Sep 21, 2013 6:42 pm |
|
|
I only have a pwr steer pump and bracketry. Don't have a full kit.
|
|
|
|
 |
055ETH
Joined: Sun Oct 23, 2011 9:05 pm Posts: 383 Location: Brisbane
Vehicle: 94 Sierra,99 gv, s13 Silvia
|
 Posted: Sat Sep 21, 2013 6:48 pm |
|
|
If you part depending on price I'd be interested in rolling shell. Everything bar engine conversion and I will bring own wheels. No jml bar either
|
|
|
|
 |
Dcraw
Joined: Fri Sep 07, 2012 3:57 pm Posts: 112 Location: Brisbane
Vehicle: suzuki sierra
|
 Posted: Sat Sep 21, 2013 6:48 pm |
|
sorry i meant to ask if you had power steer 
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Sat Sep 21, 2013 6:57 pm |
|
055ETH wrote: If you part depending on price I'd be interested in rolling shell. Everything bar engine conversion and I will bring own wheels. No jml bar either When it gets to that stage I'm sure we can sort something out. I'd be selling the suspension kit separately otherwise I'd have to include it in the price etc
|
|
|
|
 |
055ETH
Joined: Sun Oct 23, 2011 9:05 pm Posts: 383 Location: Brisbane
Vehicle: 94 Sierra,99 gv, s13 Silvia
|
 Posted: Sat Sep 21, 2013 8:57 pm |
|
|
That's cool man. I'm after it without the suspension also depending on price. I can bring my own
|
|
|
|
 |
Blkzuk
Joined: Wed Jul 03, 2013 12:58 pm Posts: 115 Location: Patterson lakes
Vehicle: 92 suzuki sierra 02 f250
|
 Posted: Sun Sep 22, 2013 3:40 am |
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Sun Sep 22, 2013 1:58 pm |
|
|
|
 |
87zook

newbie
Joined: Sun Sep 22, 2013 6:15 pm Posts: 2
Vehicle: Suzuki sierra 87
|
 Posted: Sun Sep 22, 2013 6:24 pm |
|
|
Hi I was after the rear diff would you freight it to Geelong in Victoria and if so could you find out how much freight would be i will pay freight costs thanks Chris
|
|
|
|
 |
cal213
Joined: Fri Oct 12, 2012 9:01 pm Posts: 308 Location: traralgon vic
Vehicle: jimny g13bb, 99 wrx!
|
 Posted: Sun Sep 22, 2013 6:52 pm |
|
|
keen on the front shaft. will you post at my cost?
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Sun Sep 22, 2013 7:05 pm |
|
|
At the moment I'm not super keen to part with the diffs yet as I'd like to keep it semi mobile while I make up some stands on wheels.
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Tue Sep 24, 2013 9:22 pm |
|
|
Rear bar has been sold, front bar is gone, rear door payment pending. Winch gone.
Sliders are ready to sell. As well as seats, bonnet, doors and other random pieces.
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Wed Sep 25, 2013 8:58 am |
|
|
The conversion has had a deposit taken.
|
|
|
|
 |
CJY91LUXXY
Joined: Fri Aug 02, 2013 6:30 am Posts: 4
Vehicle: 89 Hilux Crawler
|
 Posted: Wed Sep 25, 2013 1:51 pm |
|
|
Keen on the front seats and rails if you still have them. My numbers 0450784840 if you can send me a text. Cheers.
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Wed Sep 25, 2013 8:06 pm |
|
|
Front seats and rails are gone aswell as the 2 complete doors.
|
|
|
|
 |
055ETH
Joined: Sun Oct 23, 2011 9:05 pm Posts: 383 Location: Brisbane
Vehicle: 94 Sierra,99 gv, s13 Silvia
|
 Posted: Wed Sep 25, 2013 9:41 pm |
|
|
i'll take the rear diff. i'm in sunnybank and can pick it up whenever
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Thu Sep 26, 2013 6:27 pm |
|
|
Complete conversion has been sold. In a few weeks the diffs and lift kit will be available!
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Thu Sep 26, 2013 6:28 pm |
|
|
Also looks like 055eth has shotgunned the rear diff
|
|
|
|
 |
thericho
Joined: Thu Jul 08, 2010 12:55 am Posts: 33 Location: Brisbane
|
 Posted: Fri Sep 27, 2013 11:41 pm |
|
|
Chasing front flares in good condition, any for sale?
|
|
|
|
 |
sideways

az supporter
Joined: Fri Oct 29, 2010 1:53 pm Posts: 5935 Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.
|
 Posted: Fri Sep 27, 2013 11:52 pm |
|
Poor Sierra dying to make way for a Dmax. 
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Sat Sep 28, 2013 4:55 am |
|
|
It's getting relived through heaps of sierras now!
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Sat Sep 28, 2013 4:57 am |
|
|
My front flares are def straight I'll have to see the condition underneath if there rusty or not. However they do have a hole every 100 mm from rubber wheel flares.
|
|
|
|
 |
paulyyy
Joined: Sun Apr 28, 2013 9:38 pm Posts: 12
Vehicle: 94 SWB Vitara
|
 Posted: Tue Oct 01, 2013 9:02 pm |
|
|
Would exhaust system fit 94 vitara ifso I'm keen
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Tue Oct 01, 2013 9:47 pm |
|
paulyyy wrote: Would exhaust system fit 94 vitara ifso I'm keen Nuh mate! Bit of an update. I still have sliders, transfer case, lift kit (complete except u bolts, all shafts, rear seats. And a few other things.
|
|
|
|
 |
Spookie
Joined: Sat Jul 28, 2012 7:10 pm Posts: 57
Vehicle: Suzuki Sierra
|
 Posted: Wed Oct 02, 2013 4:34 pm |
|
|
Does anyone knoe were this tcase would be a gear or chain driven case?
|
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Wed Oct 02, 2013 5:27 pm |
|
|
I'm almost 100% sure standard leafies are gear. Hence why you put gears in it!
|
|
|
|
 |
055ETH
Joined: Sun Oct 23, 2011 9:05 pm Posts: 383 Location: Brisbane
Vehicle: 94 Sierra,99 gv, s13 Silvia
|
 Posted: Wed Oct 02, 2013 7:46 pm |
|
Can you update your first post and state what's already sold please man 
|
|
|
|
 |
|