| Author |
Message |
kane94
Joined: Tue Apr 16, 2013 12:15 pm Posts: 16
Vehicle: 91 g 16a swb
|
 Posted: Sun Dec 22, 2013 8:17 pm |
|
|
Time to get rid of my 91 swb vitara and I'm seeing if anyone is willing to make an offer for the car or I will part it out, if so people can make me offers on parts and I will keep them in mind if it doesn't sell. All new parts have done under 5000kms Cons. Cracked engine block just under the manifold so will need a replacement engine, runs but leaks coolant - needs a new rear diff, worn with bent axle, needs new front tie rod and the paint is very average.
Pros- exterior - 3" calmini full lift kit -31" bfg km1 muddies on 15*7 sunraysia's - custom made bullbar with winch. Pre sold - copy safari snorkel - new radiator, petrol pump, belts and hoses, and alternator - hayman towbar with wiring plug - 2" catback exhaust - new cv shafts- 10000km old Exedy standard clutch with machined flywheel - aircon and power steering install
Interior - jlx seats and centre console - half roll cage. Pre sold - new pre moulded carpet and underfelt - Sony head unit - new speakers front and rear
As I said send me an offer or if not I can hold parts for you Thanks.
|
|
|
|
 |
krat
Joined: Wed Nov 09, 2011 3:55 am Posts: 214 Location: Country Victoria
Vehicle: 1995 Vitara, SWB
|
 Posted: Tue Dec 24, 2013 11:07 am |
|
Manual  or Auto  . I need a console for an auto if you plan to part out.
|
|
|
|
 |
Bruce

az supporter
Joined: Sun Jun 11, 2006 11:30 pm Posts: 4003 Location: Brisbane
|
 Posted: Tue Dec 24, 2013 2:10 pm |
|
Exedy standard clutch with machined flywheel I'd be guessing Manual 
_________________ [quote="royce"] I wouldnt mind insulating my rear
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Tue Dec 24, 2013 2:42 pm |
|
krat wrote: Manual  or Auto  . I need a console for an auto if you plan to part out. I've got one of those, just the plastic surround bit
|
|
|
|
 |
VitNick
Joined: Sun Feb 03, 2013 8:47 am Posts: 302
Vehicle: 92 WT Sierra
|
 Posted: Tue Dec 24, 2013 4:08 pm |
|
|
I'd be keen on the calmini set up. Where abouts are you?
|
|
|
|
 |
kane94
Joined: Tue Apr 16, 2013 12:15 pm Posts: 16
Vehicle: 91 g 16a swb
|
 Posted: Tue Dec 24, 2013 10:34 pm |
|
|
Yeah manual haha. I'm in victoria mate but if not sold as a whole can post at buyers cost
|
|
|
|
 |
camskea
Joined: Sun Jul 24, 2011 2:38 am Posts: 179 Location: Melbourne
Vehicle: 1991 Vitara SWB
|
 Posted: Wed Dec 25, 2013 11:00 am |
|
|
Got a ball park figure for the whole thing?
|
|
|
|
 |
fluro_monkey
Joined: Sun Jun 02, 2013 10:37 pm Posts: 18
Vehicle: sierra
|
 Posted: Wed Dec 25, 2013 2:02 pm |
|
|
will the calmini kit fit a lwb vitara? how much are you chasing?
|
|
|
|
 |
kane94
Joined: Tue Apr 16, 2013 12:15 pm Posts: 16
Vehicle: 91 g 16a swb
|
 Posted: Wed Dec 25, 2013 4:07 pm |
|
|
If someone offered me 3000 I'd probably say yes, the water pump failed so I need to try and get it exchanged so it can be driven. No I don't think they for Lwb
|
|
|
|
 |
TRUCK

az supporter
Joined: Fri Jun 18, 2010 8:13 am Posts: 27 Location: MELBOURNE
Vehicle: 1992 lwb Vitara
|
 Posted: Wed Dec 25, 2013 7:33 pm |
|
|
Mate I'd be interested in the tow bar
|
|
|
|
 |
J--A--C--K
Joined: Tue Jan 10, 2012 3:48 am Posts: 253 Location: melbourne
|
 Posted: Wed Dec 25, 2013 7:49 pm |
|
|
Sorry if it's already stated but location ??
|
|
|
|
 |
kane94
Joined: Tue Apr 16, 2013 12:15 pm Posts: 16
Vehicle: 91 g 16a swb
|
 Posted: Wed Dec 25, 2013 10:02 pm |
|
|
Towbar $120, it's basically brand new just has a bit of paint chipped off. I'm in melbourne mate. I'll leave the car up for a few more days then will start parting if no takers.
|
|
|
|
 |
Daves4wd

az supporter
Joined: Fri Aug 26, 2011 3:17 pm Posts: 1286 Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s
|
 Posted: Wed Dec 25, 2013 11:00 pm |
|
|
What are the wheels and tyres like?? And what are you after for em?? Pm me if you like
|
|
|
|
 |
TRUCK

az supporter
Joined: Fri Jun 18, 2010 8:13 am Posts: 27 Location: MELBOURNE
Vehicle: 1992 lwb Vitara
|
 Posted: Thu Dec 26, 2013 3:52 pm |
|
|
$120 is sweet let me know when your ready to part it out .Which suburb?
|
|
|
|
 |
camskea
Joined: Sun Jul 24, 2011 2:38 am Posts: 179 Location: Melbourne
Vehicle: 1991 Vitara SWB
|
 Posted: Fri Dec 27, 2013 4:55 pm |
|
|
Price on snorkel 2" cat back and carby thanks
|
|
|
|
 |
kane94
Joined: Tue Apr 16, 2013 12:15 pm Posts: 16
Vehicle: 91 g 16a swb
|
 Posted: Mon Dec 30, 2013 11:22 pm |
|
|
I'm parting out as of now, pm me and we can work out details truck. Camskea I'd like 100 or so for the snorkel. Catback the same although it goes straight out the back so would need new mounts welded and the carbu I don't know 30 bucks but it's pretty worn and the mixture screw is bent would need a rebuild preferably
|
|
|
|
 |
kane94
Joined: Tue Apr 16, 2013 12:15 pm Posts: 16
Vehicle: 91 g 16a swb
|
 Posted: Mon Dec 30, 2013 11:24 pm |
|
|
Ok so will part it as off now, everything is available except doors, bullbar, winch, cage, ac and power steering, pm if there's anything your after will put some pics up tomorrow
|
|
|
|
 |
VitNick
Joined: Sun Feb 03, 2013 8:47 am Posts: 302
Vehicle: 92 WT Sierra
|
 Posted: Sat Jan 04, 2014 8:33 am |
|
PM'd 
|
|
|
|
 |
Heideisadog

az supporter
Joined: Fri Jun 21, 2013 1:27 pm Posts: 403 Location: Canberra, ACT
Vehicle: 1996 Leaf Sierra - Soft Top
|
 Posted: Sat Jan 04, 2014 9:21 am |
|
|
Can you PM me a picture of the seats and rains and what you'd like for them please. Thanks
|
|
|
|
 |
|