| auszookers.com https://auszookers.com/forum/ |
|
| BNE: Parting out WT SWB soft top - updated 11 Feb https://auszookers.com/forum/viewtopic.php?f=7&t=44972 |
Page 1 of 1 |
| Author: | Damo [ Wed Feb 05, 2014 10:21 pm ] |
| Post subject: | BNE: Parting out WT SWB soft top - updated 11 Feb |
![]() I'm doing this as a favour for a mate. His old man was in a car acco and he doesn't have the time or inclination to do anything with it. So you guys that want parts win! It's a 92 (I think) WT that had a cactus body. He got a new body for it with the intention of doing a rebuild and didn't quite get there. The new body is pretty good, it was rustproofed at some stage so is 99% rust free. It has got a ding in the driver's rear corner but it comes with a panel if you want to repair it. Engine, manifold, exhaust already gone. Lightforce 240s $200 ![]() ARB Bar $450 ![]() Radiator & shroud - tanks removed, cores rodded & repainted. Never refitted after reco $200 ![]() WT transfer. Worked OK, has mounts, flanges & speedo cable $150 ![]() WT dash $30 ![]() Clutch cable $20 ![]() Vit airbox. No Filter, no AFM (the one in it is modified as a temp sensor) $20 ![]() Charcoal cannister. Black, cylindrical, contains charcoal. $10 ![]() EFI pump. Aftermarket Commodore inline pump. $20 SOLD Heater tap. Winter is coming $10 ![]() Passenger side window regulator. $20 ![]() Steering shaft. You won't feel shafted at this price $10 ![]() Washer bottle. Nothing like a clean screen, if you know what I mean! $10 ![]() Pair of aftermarket seats. 1 in average condition (some cracking), the other brand new in box $150 ![]() 4 point roll bar. As pictured $50 ![]() Amp $30 ![]() I have a bunch more gear from this zook to list once I get a chance to take some more pics. There's 2 front clips, bonnet, windscreen frame, windscreen glass + rubber, doors, rear door, Lightforce spotties, aftermarket bucket seats, WT diffs (both have Lockrites), ARB winch bar etc etc. PM me if there is something in particular you're chasing. ALSO I have a bunch of other misc zook parts I will be listing seperately. EDIT: Added some items, pics should be reasonable size now, sorry bout that!! |
|
| Author: | Damo [ Wed Feb 05, 2014 10:23 pm ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
Err, sorry about the GI-FREAKIN-NORMOUS pics Will rectify that!!! EDIT: Have all the pics sorted now, do a CTRL+F5 if you're still seeing footy field sized pics |
|
| Author: | rwt65 [ Wed Feb 05, 2014 10:30 pm ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
Price on the ARB winch bar? Lightforce spotties? Pics are HUGE? |
|
| Author: | caltamz [ Thu Feb 06, 2014 12:53 am ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
Pm sent |
|
| Author: | slowsierra [ Thu Feb 06, 2014 8:09 am ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
pm sent |
|
| Author: | Damo [ Thu Feb 06, 2014 9:35 am ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
Thanks guys, all PMs replied. |
|
| Author: | tonka_tuff [ Thu Feb 06, 2014 9:12 pm ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
hey mate will you sell the manual hubs?? if so how much please? |
|
| Author: | zook_TS [ Sat Feb 08, 2014 5:22 pm ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
do you have the windscreen? |
|
| Author: | matfan [ Sun Feb 09, 2014 10:25 am ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
how much for the body? |
|
| Author: | Damo [ Sun Feb 09, 2014 1:44 pm ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
matfan wrote: how much for the body? $250 |
|
| Author: | Damo [ Sun Feb 09, 2014 7:11 pm ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
zook_TS wrote: do you have the windscreen? Pm'd you. Yes I have a screen + good rubber $100. |
|
| Author: | Blueberry [ Tue Feb 11, 2014 10:18 am ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
Pm'ed! |
|
| Author: | Damo [ Tue Feb 11, 2014 12:13 pm ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top |
Replied to all PM's Still chasing some postage costs for some people, sorry for the delay on that. |
|
| Author: | Abouwer123 [ Sat Feb 15, 2014 10:04 pm ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top - updated 11 Feb |
Hey mate, do you have the dash cluster, ? |
|
| Author: | Damo [ Sun Feb 16, 2014 7:36 am ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top - updated 11 Feb |
Abouwer123 wrote: Hey mate, do you have the dash cluster, ? Yes i have a cluster. $30 |
|
| Author: | red_elmo [ Tue Feb 18, 2014 9:10 pm ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top - updated 11 Feb |
Is the glove box all intact? Would you part the lid and the lock and the latch? |
|
| Author: | Kerrod [ Wed Feb 19, 2014 1:20 am ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top - updated 11 Feb |
Is the bonnet straight? If so how much? |
|
| Author: | Zook2510 [ Thu Feb 20, 2014 8:35 am ] |
| Post subject: | Re: BNE: Parting out WT SWB soft top - updated 11 Feb |
Hi, do you have the jackshaft available and if so how much? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|