| auszookers.com https://auszookers.com/forum/ |
|
| 85 LWB Unfinshed project + Vit based full floater PRICE DROP https://auszookers.com/forum/viewtopic.php?f=7&t=45110 |
Page 1 of 1 |
| Author: | remydog05 [ Sun Feb 16, 2014 6:46 pm ] |
| Post subject: | 85 LWB Unfinshed project + Vit based full floater PRICE DROP |
85 LWB Essentially this is a rolling chassis. I am not going ahead with this car due to time restraints etc. Body Tunnel has been widen and welded ready for aw4 auto. Rear has been bobbed about 6inchs. plus trimmed for larger tires. Rear has been custom lifted for a GV tank to be lifted so it is the same height as the bottom of the chassis rails. Comes with B pillar, 2 sets of spreader bars, windscreen, tailgate. Comes with stock front clip. Seat mounts have been modded for GTI seats. GTI seats included. Needs a rub back and final paint. Chassis Front custom Shock mounts fish plates Rear custom shock mounts Chassis extension front clip supports custom done body lift with 50mm steel rear cut off to suit bobbed body Bump stop extensions done Mounts all ready for AW4 plus auto Xmber and mounts etc. Ready to go in fresh black paint. Will come on NT diffs with no centers, axels etc, just bare min to make it roll. Also comes with an extra set of lwb brake and fuel lines. The Radiator mounts have been moved to help with thermo fan room, but it can still bolt a normal 1.3 radiator in to the mounts. GV tank included $1200 for the both I also have a LWB soft top to go with it for $100 extra. I have spoken to 3 different Engineers in Vic about this car and all three were fine with me doing the mods for Vic rego. Plus as I find other stuff I will throw it in. WT rear diff with NT spacing can go with the chassis There is hours and hours of work done to this thing, it currently has my J20a and AW4 in it. VIT based Full floater. Vit housing custom made with Joes full float kit and pintara calipers. NT Spacing. Comes with 4.6 centre $800 All of this is currently in Bairnsdale VIC Pics on the way |
|
| Author: | remydog05 [ Sun Feb 16, 2014 6:47 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
|
|
|
| Author: | remydog05 [ Sun Feb 16, 2014 6:52 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
Tunnel when first done 
|
|
| Author: | remydog05 [ Sun Feb 16, 2014 7:00 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
AS it sits today    
|
|
| Author: | remydog05 [ Sun Feb 16, 2014 7:03 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
Floater, no point in other pics, it looks like a diff! 
|
|
| Author: | tanshi [ Sun Feb 16, 2014 7:06 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
Wow ok |
|
| Author: | henno [ Sun Feb 16, 2014 7:51 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
Damn dude, did you really have to spam every single thread in the "I Want It" forum? 
|
|
| Author: | NickCooper [ Sun Feb 16, 2014 8:18 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
henno wrote: Damn dude, did you really have to spam every single thread in the "I Want It" forum? Hahahaha, I guess he just really wants to sell it. |
|
| Author: | Gwagensteve [ Mon Feb 17, 2014 5:32 am ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
It's reverse psychology. Normally it's the for sale threads that are full of "if only I had any money" and "if only this car was 100 metres from me" which is far more annoying in my opinion. Why post a wanted ad if you don't want someone with that item available to respond? GLWS Remy - that's some desirable stuff there IMHO. Steve. |
|
| Author: | dank [ Mon Feb 17, 2014 8:57 am ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
This is a bloody good start for someone looking to mod their sierra. All the nasty, hard body work and fabrication of shock mounts, body lift etc is all done. Respray and bolt in driveline, engineers and you are good to go. |
|
| Author: | 5ierra [ Mon Feb 17, 2014 9:09 am ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
Are the axles 26 spline? And or will the floater accept a 3.7 WT centre? |
|
| Author: | tanshi [ Mon Feb 17, 2014 9:48 am ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
axles will be 26 spline, but if its vitara based they never came out with a 3.7 in the rear diff. |
|
| Author: | remydog05 [ Mon Feb 17, 2014 10:39 am ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
Its vitara centre not sierra so only vitara options. |
|
| Author: | 5ierra [ Mon Feb 17, 2014 10:53 am ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
tanshi wrote: axles will be 26 spline, but if its vitara based they never came out with a 3.7 in the rear diff. Just assumed it may have been one of those situations where it was interchangeable. No harm no foul. |
|
| Author: | remydog05 [ Mon Feb 17, 2014 6:46 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
Cheers Steve and Dank |
|
| Author: | steak_knife [ Tue Feb 18, 2014 12:33 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
Giggity!!!!! |
|
| Author: | tanshi [ Tue Feb 18, 2014 12:48 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
get on it stekky! |
|
| Author: | remydog05 [ Thu Feb 20, 2014 6:47 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project, plus Vit based full floater. |
Now all on ebay. Make a bid if your keen, it all has to go to make more doof room |
|
| Author: | remydog05 [ Wed Feb 26, 2014 8:14 am ] |
| Post subject: | Re: 85 LWB Unfinshed project + Vit based full floater PRICE |
Price drop on both here and ebay, try your luck on ebay and you may just get a bargain! I have to move this on as my shed is just not big enough!!!!!!!!! |
|
| Author: | remydog05 [ Tue Mar 25, 2014 4:28 am ] |
| Post subject: | Re: 85 LWB Unfinshed project + Vit based full floater PRICE |
Still here if anyone is interested! |
|
| Author: | Samwich [ Fri May 23, 2014 10:17 am ] |
| Post subject: | Re: 85 LWB Unfinshed project + Vit based full floater PRICE |
Hey mate, are you interested in parting out certain bits at all? |
|
| Author: | remydog05 [ Sun May 25, 2014 2:01 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project + Vit based full floater PRICE |
What are you after? |
|
| Author: | remydog05 [ Sun May 25, 2014 7:38 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project + Vit based full floater PRICE |
Don't have a choice its all going, grab a bargain. http://www.ebay.com.au/itm/331212499967 ... 098wt_1232 http://www.ebay.com.au/itm/331212509374 ... 484wt_1232 |
|
| Author: | remydog05 [ Sat May 31, 2014 5:48 pm ] |
| Post subject: | Re: 85 LWB Unfinshed project + Vit based full floater PRICE |
24hrs left, looks like its going cheap. Let me know if you need any info. Very pissed to see it go! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|