auszookers.com
https://auszookers.com/forum/

1L Transfer cases
https://auszookers.com/forum/viewtopic.php?f=7&t=45162		 Page 1 of 1
Author:  upgarage [ Wed Feb 19, 2014 11:33 pm ]
Post subject:  1L Transfer cases
Have 3 of these

1. From my maruti mg410 around 200k km. Performs as it should
2. From my SJ40 km to be confirmed. Never tested this but spins freely and oil is clean
3. From a JA71 jap 660cc turbo sierra model. According to online same ratio as 1L (http://www.4x4.in.th/specification.html). Very clean

All have the desirable switch

1. $150
2. $150
3. $170 as it cost me a packet to get it here

have a few flanges here so can probably sort something out for your particular setup

Located in perth
Author:  Zook2510 [ Thu Feb 20, 2014 4:05 pm ]
Post subject:  Re: 1L Transfer cases
Hi, interested in grabbing a case off you. Would you possibly have a WT jackshaft available? We have a coily so not sure if our flanges are ok or if we need some WT flanges.
Author:  cal213 [ Thu Feb 20, 2014 4:27 pm ]
Post subject:  Re: 1L Transfer cases
Any with switches? Cheers
Author:  killazook [ Thu Feb 20, 2014 6:22 pm ]
Post subject:  Re: 1L Transfer cases
upgarage wrote:
Have 3 of these

1. From my maruti mg410 around 200k km. Performs as it should
2. From my SJ40 km to be confirmed. Never tested this but spins freely and oil is clean
3. From a JA71 jap 660cc turbo sierra model. According to online same ratio as 1L (http://www.4x4.in.th/specification.html). Very clean

Armsup All have the desirable switch Armsup

1. $150
2. $150
3. $170 as it cost me a packet to get it here

have a few flanges here so can probably sort something out for your particular setup

Located in perth


cal213 wrote:
Any with switches? Cheers
Author:  upgarage [ Thu Feb 20, 2014 7:09 pm ]
Post subject:  Re: 1L Transfer cases
yes all have switches

jackshaft not avail at this stage

ja71 case not pictured as it is at my parents house
Author:  upgarage [ Mon Jun 02, 2014 7:11 pm ]
Post subject:  Re: 1L Transfer cases
All are avail still
Author:  303zuke [ Tue Jun 03, 2014 2:17 am ]
Post subject:  Re: 1L Transfer cases
upgarage wrote:
3. From a JA71 jap 660cc turbo sierra model. According to online same ratio as 1L (http://www.4x4.in.th/specification.html).

That table is riddled with errors, I wouldn't trust it. The LJ80 and SJ40 transfer ratios are certainly wrong, and it says that the JA71 you have is a 550cc. Do you believe that? Check the ratio yourself by counting flange turns.
Author:  zookiebrat [ Tue Jun 03, 2014 2:24 am ]
Post subject:  Re: 1L Transfer cases
Please excuse me, I'm new to Suzuki stuff but could I ask what the "desirable switch" do?
Author:  jdk81 [ Tue Jun 03, 2014 5:19 am ]
Post subject:  Re: 1L Transfer cases
zookiebrat wrote:
Please excuse me, I'm new to Suzuki stuff but could I ask what the "desirable switch" do?

The switch just turns the 4wd light on and off.
It is desirable because the case and splines etc are interchangeable with 1.3L cases.
So can easily be configured to run a 1.0L in a 1.3L, or can machine and weld the counter to make a rocklobster 4.16 gears.
Author:  zookiebrat [ Tue Jun 03, 2014 6:06 pm ]
Post subject:  Re: 1L Transfer cases
jdk81 wrote:
zookiebrat wrote:
Please excuse me, I'm new to Suzuki stuff but could I ask what the "desirable switch" do?

The switch just turns the 4wd light on and off.
It is desirable because the case and splines etc are interchangeable with 1.3L cases.
So can easily be configured to run a 1.0L in a 1.3L, or can machine and weld the counter to make a rocklobster 4.16 gears.


Oh.. I see

Thanks for this info. I was hoping there was a electronic 4WD select instead of the manual lever :(
Author:  upgarage [ Tue Jun 03, 2014 10:23 pm ]
Post subject:  Re: 1L Transfer cases
JA71 transfer case is same as 1.0L ratio. just checked it

cheers
Author:  Tiop [ Thu Jul 03, 2014 8:37 pm ]
Post subject:  Re: 1L Transfer cases
got any left ? i pmed no reply :)
Author:  upgarage [ Sun Jul 20, 2014 10:53 pm ]
Post subject:  Re: 1L Transfer cases
replied

sorry dont get on here much
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/