| auszookers.com https://auszookers.com/forum/ |
|
| Moving clean out https://auszookers.com/forum/viewtopic.php?f=7&t=46312 |
Page 1 of 1 |
| Author: | Sookie [ Tue May 20, 2014 7:01 am ] |
| Post subject: | Moving clean out |
Due to moving for work, I am going to sell and give away most of the bits in my shed just so I don't have to move as much stuff and with any luck pay for truck rental. Happy to post and help as much as I can with bigger items meet up or fright. Will post give aways at your cost(SOLD) G16b? Extractors there where brand new but been sitting for ages, 3 bolt $50 ![]() ![]() G16a mpfi distributor and near new leads and cap $100 Ono 3 pin coil type G16 sump no dints or anything $30 Injectors and fuel rail g16b (red?)$70 Vitara front spring spacers 1inch pre sure $20 Good working jimny auto hubs both $100 Give aways: g16 clutch and fly wheel, used but has a bit left Few g16b/a bits eng mounts pulleys ect and random bits (I'll have a look when home over weekend) G13bb and g16 timing belts used but still look to be good g13bb one only 40,000km old if that, perfect for the tight ass Gq patrol front and rear sway bars and brackets Jimny rear brake line stock length 2inch rough dog shocks for jimny very very used but free if any use to anyone. More to come when I work out what I have and what I do wanna keep. Even tho be good to keep motor and head just not carting it across vic just to sit for ages till put it in my jimny. Can get photos over weekend or before if really needed All items are in Ararat vic 3377 Can bring items to Portland vic 3305 and between for free on my way to and from work |
|
| Author: | cal213 [ Tue May 20, 2014 3:06 pm ] |
| Post subject: | Re: Moving clean out |
Pm'd |
|
| Author: | Sookie [ Tue May 20, 2014 7:31 pm ] |
| Post subject: | Re: Moving clean out |
Have air con set up from my jimny condenser lines pump brackets ect $100 |
|
| Author: | cal213 [ Wed May 21, 2014 5:14 pm ] |
| Post subject: | Re: Moving clean out |
Hrmm. That ac unit may be good for a spare for me too. Planning an ora winch tray so i need to mod my ac system. |
|
| Author: | Amog [ Thu May 22, 2014 12:03 am ] |
| Post subject: | Re: Moving clean out |
Would you post the G13bb to wa |
|
| Author: | Sookie [ Thu May 22, 2014 4:46 am ] |
| Post subject: | Re: Moving clean out |
If you mean the g13bb head Cal213 has dibs on it just we working out post ect |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|