| auszookers.com https://auszookers.com/forum/ |
|
| SOLD [SE QLD] 1986 LWb Sierra Trayback https://auszookers.com/forum/viewtopic.php?f=7&t=47546 |
Page 1 of 1 |
| Author: | 5ierra [ Tue Aug 26, 2014 6:10 pm ] |
| Post subject: | SOLD [SE QLD] 1986 LWb Sierra Trayback |
Item: 1986 Suzuki Sierra LWB - trayback with extra-cab Location: Ipswich QLD (Will assist with shipping) Item Condition: Used Reason for selling: Not used/Personal reasons Price and price conditions: $7500 as is - $8500 fixed up (see below) - Prices are relatively firm. Extra Info: Pros: -1.6L G16B EFI -Vitara 60L fuel tank -6.5:1 t-case w/ roctoy ring -Power Steer w/ braced tie-rod -NT to WT Conversion -9500lb/4300Kg Aldi Winch w/ Synthetic Rope -4-wheel disc brake -Cro-mo cv's & axles -Twin ARB Air Lockers -32" Summit Mud Terrain on 16" XL7 Rims -Custom Extra Cab - coily dash & cluster - Maruti Fibreglass removable roof - MR2 Seats (very comfortable) -Rock Sliders & tube Bar -Virtual Lift -1" body Lift -Endless Air Compressor Set Up -Dual battery Ready(ish) -Stereo w/ 2-6" speakers & 2-6x9's -Custom Tube tray - Air Tank mounted under tray - Air hoses to either side of tray with fittings (for pumping up tires/using sir tools) - Second Battery tray for dual battery set up - Timber bed -RUF & 50mm raised rear springs all around -Metric shitload of spares to go with sale -Everything except tires is plated -Registered until November & will assist with transfer Cons: As mentioned above, many of these items will be fixed if purchased for $8500 (Deposit must be made) -Custom Solid mount on the single mounted side of the t-case needs larger bolt & stronger/thicker washer -Air-hose from compressor to tank needs to be replaced with Braided hose as the air-hose in it keeps splitting -Springs need 2 leaves taken out of them - once this is done, U-bolts will need replacing (U-bolts supplied of brought as-is) -Front Shackles need replacing -Needs new bushes -Switches on top of gearbox need to be switched around so the reverse light will light up -Front air locker won't disengage - Believe it's just the plastic piston internally that needs to be replaced, as these commonly break off (if sold as is, I will pull the airlocked center and put a spare 3.7 I have here in it, so that you can wheel it until you fix the airlocker) -Scratches on rims & minor panel damage/scratches Contact: Please PM - I'm on daily Pictures: Build thread - Starts on page 2, not my build http://www.auszookers.com/forum/viewtopic.php?f=4&t=29224&start=30 ![]() ![]() ![]() ![]() ![]()
|
|
| Author: | Verm1n [ Tue Aug 26, 2014 6:24 pm ] |
| Post subject: | Re: [SE QLD] 1986 LWb Sierra Trayback - All the bells & whis |
ohh noo.. selling the beast, definately a great car offroad.. good luck with the sale bud |
|
| Author: | 5ierra [ Tue Aug 26, 2014 6:27 pm ] |
| Post subject: | Re: [SE QLD] 1986 LWb Sierra Trayback - All the bells & whis |
Verm1n wrote: ohh noo.. selling the beast, definately a great car offroad.. good luck with the sale bud It's going to waste sitting in my garage, owned it nearly a year and only had it offroad about 5 times. Would rather see someone else get use out of it. |
|
| Author: | selaga [ Thu Aug 28, 2014 9:02 am ] |
| Post subject: | Re: [SE QLD] 1986 LWb Sierra Trayback - All the bells & whis |
...I sent you a PM....might be what I am after with a bit more negotiation...... |
|
| Author: | 5ierra [ Thu Aug 28, 2014 10:11 am ] |
| Post subject: | Re: [SE QLD] 1986 LWb Sierra Trayback - All the bells & whis |
selaga wrote: ...I sent you a PM....might be what I am after with a bit more negotiation...... Pm replied. |
|
| Author: | 5ierra [ Sun Aug 31, 2014 5:08 pm ] |
| Post subject: | Re: [SE QLD] 1986 LWb Sierra Trayback - All the bells & whis |
Deposit Taken |
|
| Author: | murph51 [ Tue Sep 09, 2014 6:39 pm ] |
| Post subject: | Re: [SE QLD] 1986 LWb Sierra Trayback - All the bells & whis |
following, very interested! |
|
| Author: | 5ierra [ Sat Sep 20, 2014 7:32 pm ] |
| Post subject: | Re: SOLD [SE QLD] 1986 LWb Sierra Trayback |
SOLD! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|