auszookers.com
https://auszookers.com/forum/

Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich, Qld]
https://auszookers.com/forum/viewtopic.php?f=7&t=47716
Page 1 of 1

Author:  Arinvar [ Tue Sep 09, 2014 10:43 am ]
Post subject:  Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich, Qld]

2 inch suspension lift - $200

Done less than 3000 km. Includes leafs, shocks, U bolts, OEM shackles if you need them, and whatever else you want.

Image



Marine Carpet Flooring - $100

This is what it looks like after 12 months of neglect in the sun and rain with no cover. When I pull it out I'll give it a proper clean. Really great flooring, easy to clean (if you do it more than every 12 months). Doesn't get smelly when wet. Dried mud just vacuums off.

Image
Image



Anything off this body except the front axle. Make me an offer.

The doors are good, rust free, windows work, home made vinyl/mdf interiors on them. Its mostly in good condition, its just been sitting in the drive way for about 18 months. Windscreen is good, the wipers aren't great, plenty of surface rust on them. A few dings and scratches but hasn't fallen over or rolled. Front seats are stock, average condition, comfortable, no springs sticking up your butt.

It'll be scrap metal within the next few weeks though, so don't dawdle, I'm not a afraid to haggle a bit, so low ball the shit out of me.

Image
Image
Image

Author:  Arinvar [ Tue Sep 09, 2014 10:45 am ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

Also got a tow bar - $100

Will pull it off and take photo's later.

Author:  dono1 [ Tue Sep 09, 2014 6:26 pm ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

Steering column?

Author:  Arinvar [ Tue Sep 09, 2014 8:12 pm ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

Steering column - $100.

Author:  Zuzukie [ Wed Sep 10, 2014 4:04 pm ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

How much for the flares?
Will you post them?

Author:  Arinvar [ Wed Sep 10, 2014 5:15 pm ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

$50 and the flares are yours. Postage however will probably be a bit pricey since they're quite large. Happy to post anything though with cash up front. Just tell me what and I'll do my best to get a price on postage.

Author:  Zuzukie [ Wed Sep 10, 2014 5:23 pm ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

Pm'd you about flares

Author:  tuffcoily [ Sat Sep 13, 2014 6:19 pm ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

Pm sent about lift kit

Author:  aaronm1985 [ Sun Sep 14, 2014 10:56 am ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

Will that windscreen fit into a 90 model wide track?

Author:  Arinvar [ Sun Sep 14, 2014 12:21 pm ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

It's all pending sold at the moment sorry guys.

Author:  murph51 [ Sun Oct 05, 2014 6:00 pm ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

carpet + sliders?

Author:  monley [ Sun Oct 05, 2014 11:26 pm ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

Flares gone?

Author:  Nzkarta23 [ Mon Oct 06, 2014 7:40 am ]
Post subject:  Re: Molded Floor, 2 inch lift, and SJ50 for parts [Ipswich,

Hey mate are floor pans rust free

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/