| auszookers.com https://auszookers.com/forum/ |
|
| Shed clean up- Toyota diff's, Sierra to Jimny transfer jig, https://auszookers.com/forum/viewtopic.php?f=7&t=47793 |
Page 1 of 1 |
| Author: | kyzermattingley [ Mon Sep 15, 2014 12:05 am ] |
| Post subject: | Shed clean up- Toyota diff's, Sierra to Jimny transfer jig, |
As mentioned I have the following stuff to get rid of, pic to follow 1- modified bundera housing, axles etc -all brackets removed from housing, housing then ground smooth, axles have been redrilled (by Driveline Services) to suzi 5stud pattern with new studs fitted, comes with Jimny front disks that I was using to do a disk brake rear conversion, comes with bearing cups and other bits and pieces. $200ono. Willing to weld on brackets / shave pumpkin / brace / disk brackets for more $ SOLD2- Sierra transfer to Jimny jig -puts the transfer about 30mm higher and 30mm further forward, I used this to make my brackets for my Sierra transfer into my Jimny, fits better than other kits on the market $100onoSOLD SOLD3- ARB locker wiring, front locker switch and pump switch -the box is just missing the diff centre $25 SOLD 4- hilux complete front diff -wheel to wheel, not sure what ratio centre, have all the parts to convert to hi-pinion with rear mounted toe rod $150 5- LROR Suzuki to Toyota diff conversion flanges -Suzuki tail shaft pattern to Toyota diff pinion spline, used for putting Toyota axles into your Suzuki $50ea. Or $80pair SOLD6- Jimny front diff brackets -front diff brackets that I plasma cut from a Jimny diff housing $10SOLD 7- Toyota 4.1 hi-pinion 8" front diff centre -removed from an 80series front diff, great condition, never got around to using $100 Location- Murarrie, Brisbane, QLD CONTACT- Brett 0433191205 Willing to ship stuff at your expense |
|
| Author: | dougies_tx5turbo [ Mon Sep 15, 2014 12:34 am ] |
| Post subject: | Re: Shed clean up- Toyota diff's, Sierra to Jimny transfer j |
Mate will take 1 ,2 and 6 pm sent and I well txt in the morning and can pick up tomorrow Monday afternoon thank Doug Edit maybe take all the staff needed to convert to jimny front and rear |
|
| Author: | Sookie [ Mon Sep 15, 2014 7:54 am ] |
| Post subject: | Re: Shed clean up- Toyota diff's, Sierra to Jimny transfer j |
Hey mate I'll take locker wiring and switch ect |
|
| Author: | Zook_Fan [ Mon Sep 15, 2014 9:08 am ] |
| Post subject: | Re: Shed clean up- Toyota diff's, Sierra to Jimny transfer j |
In for the locker wiring etc. if Sookie pulls out. |
|
| Author: | nick_bj40 [ Wed Sep 17, 2014 8:07 pm ] |
| Post subject: | Re: Shed clean up- Toyota diff's, Sierra to Jimny transfer j |
I'm keen on the high pinion centre but how much would freight be to nsw 2526? |
|
| Author: | kyzermattingley [ Sun Sep 21, 2014 6:03 pm ] |
| Post subject: | Re: Shed clean up- Toyota diff's, Sierra to Jimny transfer j |
Lockers switches and wiring sold |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|