Hey champ will you take 200 for the roll bar
Pm me some photos
| auszookers.com https://auszookers.com/forum/ |
|
| parting sierra - SWB https://auszookers.com/forum/viewtopic.php?f=7&t=51233 |
Page 1 of 1 |
| Author: | stevend34 [ Sat Oct 24, 2015 10:18 am ] |
| Post subject: | parting sierra - SWB |
For Sale as parts or whole car. South East Suburbs Melbourne Flexy Flares $80 for the set Roll bar $250 Scissor shackles / drop down shackles $80 Leaf Springs – rear springs used. Now 2 front sets left. In parts. $50 the lot Front Shocker towers (already cut off) $40 Shocks – No selling Tyres Not selling Soft top – White – torn - $free with another purchase over $100 Rear seat (single) $150 Battery $10 (only just starts car) Front seats $100 each Dash $150 original Stereo $40 ARB Bull bar (from differnt car hence surface rust) $250 Diffs Centres, (warn stock ratio) $75 each (keeping housings) Transfer – Not selling G box –Not selling Drive shafts $80 each Doors $100 each Starter motor $50 Airbox $50 Complete exhaust $50 Spare wheel holder $30 Inlet manifold $50 sold Alternator $50 Aftermarket (non-sierra, bigger) Radiator $50 Thermo fan $50 Heater core $50 Blower fan $50 Bonnet $200 Grill (has been cut for winch) $40 Body $400 (excludes doors trims ect.) Fuel tank (damaged) $50 Wiring loom $150 complete engine $300 Steering column and all steering parts $200 see here for photos: http://www.gumtree.com.au/s-ad/belgrave-heights/wrecking/wrecking-suzuki-sierra-sj70-1993/1092637418 whole car - make an offer - was 95% complete at time of posting this add. just in bits Anything else I have missed make a reasonable offer… Msg or call for more info. Some parts you will need to pull off yourself. Pickup Inspections welcome |
|
| Author: | J--A--C--K [ Sat Oct 24, 2015 1:47 pm ] |
| Post subject: | Re: parting sierra - SWB |
Long side axle out of rear diff?? |
|
| Author: | SteamPunk [ Mon Oct 26, 2015 5:47 am ] |
| Post subject: | Re: parting sierra - SWB |
Hey Mate I'm after the Bonnet, B-pillar and possible the tailgate. Cheers Aaron |
|
| Author: | hayden1992 [ Tue Oct 27, 2015 4:54 am ] |
| Post subject: | Re: parting sierra - SWB |
Man i would totally get that bull bar if it was in sa! |
|
| Author: | blackzook [ Sat Oct 31, 2015 6:33 am ] |
| Post subject: | Re: parting sierra - SWB |
Hey champ will you take 200 for the roll bar Pm me some photos
|
|
| Author: | bibby [ Sun Nov 01, 2015 11:30 pm ] |
| Post subject: | Re: parting sierra - SWB |
ill take the clinometer?? |
|
| Author: | 4x4xzook [ Mon Nov 02, 2015 8:41 am ] |
| Post subject: | Re: parting sierra - SWB |
Suzukikid may want the doors. |
|
| Author: | suzukikid [ Mon Nov 02, 2015 9:46 am ] |
| Post subject: | Re: parting sierra - SWB |
Hey mate would do a drivers door for $80? If its straight and rust free |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|