auszookers.com
https://auszookers.com/forum/

[QLD]Sierra transfer with 6.5's, baleno engine, sierra G/B
https://auszookers.com/forum/viewtopic.php?f=7&t=52230		 Page 1 of 1
Author:  boostedbrick [ Thu Mar 31, 2016 3:50 pm ]
Post subject:  [QLD]Sierra transfer with 6.5's, baleno engine, sierra G/B
Sierra transfer with 6.5 gearset. Looks to have WT front outputs, drum hand brake rear that has been drilled with WT spacing. Rocktoy ring, welded to standard mounts. Approx. 500kms on it. Front output looks like it needs shimming. $500 SOLD


Baleno 1.6, right angle dizzy swap, custom grind cam shaft. Rebuilt head, block has roughly 150, 000 on it. Includes clutch. Put roughly 100ks on it after the head was rebuilt, then pulled and stored for the last 2 years. $500
I do have the loom and ECU for this somewhere in the shed, however the loom was cut and will need to be re joined. If you want it you can have it.


Sierra 5 speed gear box, pulled from the same vehicle as the above engine. $150

Sierra 5 speed, i think 2nd gear was a bit rough to get into.. $80


2' exhaust, with extractors to suit the engine above. single muffler, cat with no internals. $150


Located in Browns Plains, 4118.
You can contact me on here..
Pick up only
Author:  pjtr17 [ Thu Mar 31, 2016 5:43 pm ]
Post subject:  Re: [QLD]Sierra transfer with 6.5's, baleno engine, sierra G
Hey mate il take the transfer can pick up tonight
Have pmd you mate give me a call or text 0418649574

Cheers pat
Author:  boostedbrick [ Fri Apr 01, 2016 4:01 pm ]
Post subject:  Re: [QLD]Sierra transfer with 6.5's, baleno engine, sierra G
Transfer is sold..
Author:  boostedbrick [ Thu Apr 07, 2016 1:29 pm ]
Post subject:  Re: [QLD]Sierra transfer with 6.5's, baleno engine, sierra G
Second gearbox added.
Author:  tomgurdon [ Tue Jun 14, 2016 5:19 pm ]
Post subject:  Re: [QLD]Sierra transfer with 6.5's, baleno engine, sierra G
Baleno Engine still available?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/