| auszookers.com https://auszookers.com/forum/ |
|
| Sierra CAP locker https://auszookers.com/forum/viewtopic.php?f=7&t=53574 |
Page 1 of 1 |
| Author: | Built4thrashing [ Sun Nov 27, 2016 5:20 pm ] |
| Post subject: | Sierra CAP locker |
I've got an original prototype CAP locker I no longer require. Will fit 26 spline Sierra 4 pin center. Brand new. Its never been used. Locker only. no electrics or instructions I bought it to see if it could be installed in the font of my GV but it wont fit so i don't need it. I fitted it to a center but it wouldnt fit in the GV front housing. $500 Pick up Dandenong North or i can post at your expense. PM or sms. 0401510759 
|
|
| Author: | Scrawny [ Sun Nov 27, 2016 5:26 pm ] |
| Post subject: | Re: Sierra CAP locker |
The housing does need to be trimmed back to make it fit |
|
| Author: | J--A--C--K [ Mon Nov 28, 2016 4:28 pm ] |
| Post subject: | Re: Sierra CAP locker |
For someone who knows nothing of the cap locker what kind of electrical bits are needed? Just switch and relays or something more than repco shelf stock? |
|
| Author: | Built4thrashing [ Mon Nov 28, 2016 5:28 pm ] |
| Post subject: | Re: Sierra CAP locker |
J--A--C--K wrote: For someone who knows nothing of the cap locker what kind of electrical bits are needed? Just switch and relays or something more than repco shelf stock? Its air operated just like other Air lockers. you'll need a compressor,air solenoid, dash switch. or buy a locker solenoid kit from ARB or Uneek4x4 |
|
| Author: | Built4thrashing [ Wed Dec 21, 2016 7:40 pm ] |
| Post subject: | Re: Sierra CAP locker |
bump. |
|
| Author: | greenzook89 [ Fri Dec 30, 2016 7:53 pm ] |
| Post subject: | Re: Sierra CAP locker |
Wasn't Joe replacing all the prototypes with production versions? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|