auszookers.com • View topic

Board index » Shift It And Find It » I Want it I Want it I want it

brake hoses

Page 1 of 1

[ 24 posts ]

Print view

Previous topic | Next topic

Author

Message

ando_zook94

Joined: Sun May 09, 2010 9:23 pm
Posts: 263
Location: brissy

Posted: Fri Jun 04, 2010 3:19 am

lifted my sierra sj70 and now the hoses will be to short for 4wdin. soo need longer

_________________
If in doubt power out!

BUZOOKA

az supporter

Joined: Sun Aug 30, 2009 11:30 pm
Posts: 2659
Location: hobart tasmania

Posted: Fri Jun 04, 2010 3:58 am

i think its off the early modle swifts they r 4 inces longer standard sierras

well thats wat ive heard someone else may be able to shed more light on it

_________________
-indebt 4x4 club-

nav 32s n winch cust rear

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Fri Jun 04, 2010 5:57 am

There is a a place out Bayside that makes them, I've heard they are the only ones that will make brake hoses.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Fri Jun 04, 2010 6:21 am

ScrawnC wrote:

There is a a place out Bayside that makes them, I've heard they are the only ones that will make brake hoses.

Bhss make em to, including s/steel braided.

_________________
I used to be indecisive,
now I'm not so sure.....

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Fri Jun 04, 2010 8:40 am

dont buy second hand ones. your saftey and others depend on them working properly so just buy new ones or get them made to suit. Wreckers are not even suposed to sell them.. Its against the law.

B4T

_________________
B4T

Built by me to be driven like a rental

Choppy

az supporter

Joined: Fri Nov 06, 2009 10:30 pm
Posts: 1074
Location: sunshinecoast

Posted: Fri Jun 04, 2010 8:53 am

ive been told enzed can make them up whilst you wait.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Fri Jun 04, 2010 8:55 am

Choppy wrote:

ive been told enzed can make them up whilst you wait.

I asked the other day & got a NO!
& he's an ole mate to.

_________________
I used to be indecisive,
now I'm not so sure.....

mrw82

az supporter

Joined: Tue Jul 03, 2007 11:30 pm
Posts: 1350
Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre

Posted: Fri Jun 04, 2010 9:08 am

enzed can do speedflow hoses but they are not DOT approved and cannot be used on any road registered vehicle.

caboolture exhaust and mechanical on beerburrum rd caboolture makes them. so does the aussie brakes service place on gympie rd lawnton.

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Fri Jun 04, 2010 9:31 am

mrw82 wrote:

caboolture exhaust and mechanical on beerburrum rd caboolture makes them. so does the aussie brakes service place on gympie rd lawnton.

Good to know, I need some made up that way

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Fri Jun 04, 2010 9:41 am

the mobile bloke in Brissy will make em too, I assume checkpoint will as well

zuki

Joined: Thu Sep 25, 2008 11:30 pm
Posts: 370
Location: Ipswich

Posted: Fri Jun 04, 2010 11:12 am

ando_zook94 wrote:

lifted my sierra sj70 and now the hoses will be to short for 4wdin. soo need longer

I think you have PM

_________________
Zuki
Suzuki Sierra 1990 Hardtop
Now just drive i

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Fri Jun 04, 2010 9:29 pm

steknig wrote:

Choppy wrote:

ive been told enzed can make them up whilst you wait.

I asked the other day & got a NO!
& he's an ole mate to.

I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!!
Your 'mate' doesn't like you.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Fri Jun 04, 2010 9:30 pm

want33s wrote:

steknig wrote:

Choppy wrote:

ive been told enzed can make them up whilst you wait.

I asked the other day & got a NO!
& he's an ole mate to.

I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!!
Your 'mate' doesn't like you.

Yer I get alot of that.. :roll:

_________________
I used to be indecisive,
now I'm not so sure.....

usher44

Joined: Thu Sep 17, 2009 11:30 pm
Posts: 230
Location: Bundaberg, QLD

Posted: Fri Jun 04, 2010 10:21 pm

want33s wrote:

steknig wrote:

Choppy wrote:

ive been told enzed can make them up whilst you wait.

I asked the other day & got a NO!
& he's an ole mate to.

I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!!
Your 'mate' doesn't like you.

yeah all mine have been made by enzed on the spot, you must be rubbing him the wrong way.

_________________
http://www.youtube.com/watch?v=PZvFGpfWvVI

Jccck

Joined: Sun Apr 11, 2010 11:30 pm
Posts: 706

Posted: Sat Jun 05, 2010 1:10 am

90 to 93 Honda Accord
Same connections, 6" longer

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Sat Jun 05, 2010 8:06 am

usher44 wrote:

want33s wrote:

steknig wrote:

Choppy wrote:

ive been told enzed can make them up whilst you wait.

I asked the other day & got a NO!
& he's an ole mate to.

I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!!
Your 'mate' doesn't like you.

yeah all mine have been made by enzed on the spot, you must be rubbing him the wrong way.

No.

Some Enzeds will not do it because of 10k + extra insurance per year.

_________________

BlueSuzy wrote:

I'm over the G16b's.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sat Jun 05, 2010 8:35 am

BlueSuzy wrote:

usher44 wrote:

want33s wrote:

steknig wrote:

Choppy wrote:

ive been told enzed can make them up whilst you wait.

I asked the other day & got a NO!
& he's an ole mate to.

I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!!
Your 'mate' doesn't like you.

yeah all mine have been made by enzed on the spot, you must be rubbing him the wrong way.

No.

Some Enzeds will not do it because of 10k + extra insurance per year.

See!!!

_________________
I used to be indecisive,
now I'm not so sure.....

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Sat Jun 05, 2010 8:38 am

BlueSuzy wrote:

usher44 wrote:

want33s wrote:

steknig wrote:

Choppy wrote:

ive been told enzed can make them up whilst you wait.

I asked the other day & got a NO!
& he's an ole mate to.

I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!!
Your 'mate' doesn't like you.

yeah all mine have been made by enzed on the spot, you must be rubbing him the wrong way.

No.

Some Enzeds will not do it because of 10k + extra insurance per year.

youd reckon a hose blowing on some large machinery has the possibility to cause a much larger liability bill than a bake hose going on a car that has an immediate failsafe and warning system built in

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Sat Jun 05, 2010 10:49 am

royce wrote:

BlueSuzy wrote:

usher44 wrote:

want33s wrote:

steknig wrote:

Choppy wrote:

ive been told enzed can make them up whilst you wait.

I asked the other day & got a NO!
& he's an ole mate to.

I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!!
Your 'mate' doesn't like you.

yeah all mine have been made by enzed on the spot, you must be rubbing him the wrong way.

No.

Some Enzeds will not do it because of 10k + extra insurance per year.

youd reckon a hose blowing on some large machinery has the possibility to cause a much larger liability bill than a bake hose going on a car that has an immediate failsafe and warning system built in

Sometimes. My hyd hoses just seperate layers or leak over time, and fittings leak. From what i have seen.

Onroad must be a higher Liability.

_________________

BlueSuzy wrote:

I'm over the G16b's.

2stroker

Joined: Sun Sep 07, 2008 11:30 pm
Posts: 2689
Location: North Brisbane

Posted: Sat Jun 05, 2010 12:07 pm

I have replaced brake lines that I thought looked dodgy, and I had an old Nissan that had a brake line weep causing the pedal to sink when you held the brake on. But has anyone actually had a brake line completely rupture when they put their foot hard on the brakes.

Zook_Fan

az supporter

Joined: Thu Mar 13, 2008 10:30 pm
Posts: 4530
Location: Toowoomba
Vehicle: Maruti and LJ80's

Posted: Sat Jun 05, 2010 12:14 pm

I have but it was a faulty metal line. it was rubbing through because of contact with the steering shaft, i hit the brakes hard and it ruptured

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Sat Jun 05, 2010 12:44 pm

Biggest brake failure i had was a pad jumped out.. :lol:

But your better to buy new, They are cheap.

Any brake place should be able to do them, and some hydraulic hose places.

_________________

BlueSuzy wrote:

I'm over the G16b's.

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Sat Jun 05, 2010 8:41 pm

Stekky if you rub me the right way I will be your friend!!!

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sat Jun 05, 2010 9:47 pm

eldo wrote:

Stekky if you rub me the right way I will be your friend!!!

Is this more facebook talk??

_________________
I used to be indecisive,
now I'm not so sure.....

Page 1 of 1

[ 24 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 61 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum