[usher44]

hey guys im after a 1.3 nt drive shaft parts or an entire jack shaft.

(thats the medium bolt pattern)

im heading to the wreckers in the morning to have a look see but dont like my chances.

[want33s]

.

[usher44]

want33s wrote:

.

yeah ok settle down... .....so i have rebuilt that transfer case i got off ya with the 6.5 gears. once i got the thing apart the inside wasnt that bad.

however i didnt realise the splines on the cases would be different. i thought i could swap my 1L flanges off my old case.

the rear output is right cause of the brake drum but the front two flanges have to be 1.3L

so now im gonna have to adapt my drive line to suit. i have plenty of 1.3 wt and 1L uni's but none of that in between size, have you?

[want33s]

usher44 wrote:

i have plenty of 1.3 wt and 1L uni's but none of that in between size, have you?

Yeah got quite a few NT jackshafts and flanges..

[usher44]

want33s wrote:

usher44 wrote:

i have plenty of 1.3 wt and 1L uni's but none of that in between size, have you?

Yeah got quite a few NT jackshafts and flanges..

It must have been my lucky day, i found a front and rear drive shaft with the right flanges at the wreckers for 60 bucks.
used the front and made a jack shaft out the rear one and my orriginal jack shaft.

gears are in and working

thanks anyway