| auszookers.com https://auszookers.com/forum/ |
|
| F10A Engine https://auszookers.com/forum/viewtopic.php?f=8&t=10364 |
Page 1 of 1 |
| Author: | slusher [ Thu Mar 11, 2010 1:55 am ] |
| Post subject: | F10A Engine |
Anyone know where to get and how much to pay for a reconditoned f10a engine, my f10a just blew up and is not looking good. looking at different options. Cheers |
|
| Author: | BUZOOKA [ Thu Mar 11, 2010 2:03 am ] |
| Post subject: | Re: F10A Engine |
u could always runa 1.3 motor with ur 1L gearing would make it nice in low range |
|
| Author: | slusher [ Thu Mar 11, 2010 2:31 am ] |
| Post subject: | Re: F10A Engine |
Open to suggestions, although have been told that the 1 litre is a better motor. If I have toI will rebuild it, but I know I at least need a new head for the old girl, and the block needs to be resleeved, any ideas?? |
|
| Author: | 89_tintop [ Thu Mar 11, 2010 2:40 am ] |
| Post subject: | Re: F10A Engine |
what happened to the head?? got any pics your better off rebulding one then buying 2nd hand |
|
| Author: | slusher [ Thu Mar 11, 2010 2:44 am ] |
| Post subject: | Re: F10A Engine |
A lot of pitting in the metal, looks like it has already been shaved at least once and not much more available to work with, have only had for a few months so not sure of the full history. |
|
| Author: | slusher [ Thu Mar 11, 2010 2:47 am ] |
| Post subject: | Re: F10A Engine |
When I Pulled her down (after the big BANG) cylinder number three was laying in the sump in a lot of pieces, the only part of it left on the conrod was the very top of the cylinder head. Needless to say I need to get the block done nd the crank machined and now I have found out the head needs replacing. I think I will better off rebuilding, at least then I know everything is new and good to go. |
|
| Author: | 89_tintop [ Thu Mar 11, 2010 11:12 pm ] |
| Post subject: | Re: F10A Engine |
hey mate check out ebay. there is 2 from the same guy.. oe whole and one in bits.. you should be able to get 1 good one out of 2 of them http://cgi.ebay.com.au/Suzuki-Sierra-SJ ... 4a9f3db228 http://cgi.ebay.com.au/Suzuki-Sierra-SJ ... 4a9f3dab33 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|