auszookers.com
https://auszookers.com/forum/

Wanted outer part of front LHS tripod joint.
https://auszookers.com/forum/viewtopic.php?f=8&t=11080		 Page 1 of 1
Author:  Warpspeed [ Mon Apr 12, 2010 4:07 pm ]
Post subject:  Wanted outer part of front LHS tripod joint.
What I am after is the outside part of a front LHS drive shaft tripod joint.
The bit that bolts onto the diff drive flange with three bolts.
Author:  atari4x4 [ Mon Apr 12, 2010 4:11 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
got an axle here but it's a 22 spline?

it looks like this
Image

Image

or do you need the flange & cup from the LHS CV?
Author:  ninjadaniel [ Mon Apr 12, 2010 4:11 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
post a pic. also model and year would be nice :)
Author:  ODA1 [ Mon Apr 12, 2010 4:19 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
i posted this in the ebay thread earlier today.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 500wt_1182
Author:  atari4x4 [ Mon Apr 12, 2010 4:19 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
it's for a vitara i'm guessing.


i do have a LHS CV cup floating around but it was slightly damaged during the exploding CV incident.

let us know what you need.
Author:  Warpspeed [ Mon Apr 12, 2010 5:01 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
atari4x4 wrote:
it's for a vitara i'm guessing.


i do have a LHS CV cup floating around but it was slightly damaged during the exploding CV incident.

let us know what you need.


The part on the left is much larger than a Zuke part.

But the Zuke equivalent, the outer triangular cup for the tripod joint.
A damaged one, would be fine, I only really want to look at it and measure it up.

Image

The part I want bolts directly onto this flange...........

Image
Author:  atari4x4 [ Mon Apr 12, 2010 5:11 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
i've got one here it's yours to keep if you cover postage?


the vitara CV's are VERY different to that, i'm hoping these pics might help?

Image

Image

Image

Image

Image

Image

Image

Image
Author:  Warpspeed [ Mon Apr 12, 2010 5:22 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
If it has 23 splines, I may still be able to use it.
Author:  atari4x4 [ Mon Apr 12, 2010 5:28 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
hmmmm, 23 spline is that a typo?

the early vitara's have an inner spline of 22 or the later ones are 26 spline?

i've got no idea on what the spline count on the hub end.
Author:  Warpspeed [ Mon Apr 12, 2010 5:37 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
This GTR shaft I have here, has 23 splines at inner end, and 22 splines at the outer end.

I have seen the Vitara outer CV joints advertised on e-bay also having 22 splines.

It might still be workable if I use the Vitara shaft along with the Vitara inner CV, if the shaft lengths are similar.
This shaft is 360mm overall, or 330mm from center of spline to center of spline which may be easier to measure if the shaft is assembled.
Author:  atari4x4 [ Mon Apr 12, 2010 5:48 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
i don't have a complete shaft here, just the broken on in the photo's.

i can post either just the cup that bolts onto the axle, or i can box up & post the axle, the cup & the rest of the broken LHS if you want?
Author:  want33s [ Mon Apr 12, 2010 8:04 pm ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
I have a good pair of 94 Vit SWB CV's here... $50 plus post.
Author:  Polar_Bear [ Tue Apr 13, 2010 12:23 am ]
Post subject:  Re: Wanted outer part of front LHS tripod joint.
atari4x4 wrote:

i've got no idea on what the spline count on the hub end.


hub end is 26 spline aswell
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/