| auszookers.com https://auszookers.com/forum/ |
|
| CV's for Jimny https://auszookers.com/forum/viewtopic.php?f=8&t=12088 |
Page 1 of 1 |
| Author: | Bugsta [ Sat May 22, 2010 11:36 pm ] |
| Post subject: | CV's for Jimny |
I am pretty sure I busted a CV at GH yesterday. I was already on the lookout for Heavy Duty CV's because I am going to install lockers. So, Does anyone know of any sources for some good quality heavy duty CV joints for 08/09 Jimny? I am also after some Urethane Panhard bushes, as I flogged out the front ones completely yesterday and ended up with only 30deg of steering. THAT was fun to drive home! edit: I am told that I'd be better off just going a whole upgrade to Chrome Molly axle's and HD CV's! |
|
| Author: | BlueSuzy [ Sun May 23, 2010 6:59 am ] |
| Post subject: | Re: CV's for Jimny |
Did you end up recieving the stuff from me? |
|
| Author: | Bugsta [ Sun May 23, 2010 7:57 am ] |
| Post subject: | Re: CV's for Jimny |
Hi mate Yeah i did, a week ago now I think. Sorry, I did mean to send an email to let you know. Do you have a RH guard? |
|
| Author: | BlueSuzy [ Sun May 23, 2010 8:31 am ] |
| Post subject: | Re: CV's for Jimny |
I do have the rh guard and i have cv's but still in the hubs.. Didnt have a star socket for the hubs.. Did you need cv's only or axle shafts as well? May be a pain to post. |
|
| Author: | Bugsta [ Sun May 23, 2010 9:00 am ] |
| Post subject: | Re: CV's for Jimny |
I have an entire front diff assembly disc to disc which I can raid for a simple replacement, but I really want to upgrade the CV's and axles anyways. |
|
| Author: | BlueSuzy [ Sun May 23, 2010 10:48 am ] |
| Post subject: | Re: CV's for Jimny |
Is there a place that upgrades jimny cv's? Next option maybe 1.3 wt diff, Bigger axles/cv's stock. Then upgrade with cromo's. |
|
| Author: | Bugsta [ Sun May 23, 2010 12:30 pm ] |
| Post subject: | Re: CV's for Jimny |
Kas suggested that today. What is the track difference between Jimny and WT? |
|
| Author: | BlueSuzy [ Mon May 24, 2010 12:18 am ] |
| Post subject: | Re: CV's for Jimny |
Unsure. You may have to ask in tech. Jimny's look wider than WT |
|
| Author: | 2stroker [ Mon May 24, 2010 12:26 am ] |
| Post subject: | Re: CV's for Jimny |
Wayne I am pretty sure that the Jimny is 1355 and the WT is narrower at 1300, but this can be sorted out with wider wheels |
|
| Author: | Birdman1985 [ Mon May 24, 2010 1:38 am ] |
| Post subject: | Re: CV's for Jimny |
2stroker wrote: Wayne I am pretty sure that the Jimny is 1355 and the WT is narrower at 1300, but this can be sorted out with wider wheels
Or would a set of wheel spacers suffice also? Mitch. |
|
| Author: | Bugsta [ Mon May 24, 2010 9:56 pm ] |
| Post subject: | Re: CV's for Jimny |
I asked Tim today if he can check on HD axles and CV's. Kas, I agree with the premise of going back to WT diffs and welding Jimny suspension brackets to it, but... Sierras are now 15 years old and getting older, in the least. Jimny is still in production and can really only get more popular as time goes on. If I go the Sierra route, I have to outlay more money for diff assembly, fabrication of bracketing and reinforcing, spacers or rims, and possibly more. I have this diff housing already reinforced, albeit that I have to refurbish it cos it leaks like a s sieve at the ball and weld. Peter is on the job. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|