I just quoted $450 for a complete steel GV front diff? I already have the 5.12 R&P to go into it but the $450 bites
| auszookers.com https://auszookers.com/forum/ |
|
| GV Steel Diff Centre https://auszookers.com/forum/viewtopic.php?f=8&t=13489 |
Page 1 of 1 |
| Author: | robbo [ Mon Jul 12, 2010 6:28 am ] |
| Post subject: | GV Steel Diff Centre |
If you have or know of where one is at a reasonable price let me know. Cheers Rob |
|
| Author: | 4x4ish [ Mon Jul 12, 2010 8:46 am ] |
| Post subject: | Re: GV Steel Diff Centre |
what is a reasonable price and what is too much. i will need one at a later date no doubt and would like to know in the real world what they are costing. |
|
| Author: | Mick70b [ Mon Jul 12, 2010 10:41 am ] |
| Post subject: | Re: GV Steel Diff Centre |
I just quoted $450 for a complete steel GV front diff? I already have the 5.12 R&P to go into it but the $450 bites
|
|
| Author: | atari4x4 [ Mon Jul 12, 2010 10:44 am ] |
| Post subject: | Re: GV Steel Diff Centre |
thats about average... they have gone for more & they have gone for less... |
|
| Author: | robbo [ Mon Jul 12, 2010 10:54 am ] |
| Post subject: | Re: GV Steel Diff Centre |
already have the housing just chasing down the centre. 250-350 is what i expect to pay for the centre alone |
|
| Author: | atari4x4 [ Mon Jul 12, 2010 11:07 am ] |
| Post subject: | Re: GV Steel Diff Centre |
when talking "centre" are you reffering to the pinion carrier? i bought a new one for $120, still in the original box/wrapping. EDIT: you will only need the carrier if you're fitting it to a vitara as you will need to swap the 5.12:1 diff ratio into the steel carrier, you could recoup some $$$$'s by selling the 4.6 or 4.8 diff gears that come with the GV carrier. |
|
| Author: | robbo [ Tue Jul 13, 2010 7:57 pm ] |
| Post subject: | Re: GV Steel Diff Centre |
Yep just need the bit the r&p goes into. 5.12's are already done just have to be swapped over. |
|
| Author: | Mick70b [ Wed Jul 14, 2010 2:59 am ] |
| Post subject: | Re: GV Steel Diff Centre |
Just checking that a '99 GV Steel diff will fit my '97 Vit, Both are 26 spline and I've got the 5.12 R&P ready to go, so I just have to have the 5.12s swapped into it right ??? 4X4ish there is one at SuziFour Wreckers at the moment, they wanted $550 complete, not sure if they will part it out for you. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|