auszookers.com
https://auszookers.com/forum/

[W.A.] 1.6/baleno/vitara exhaust manifold
https://auszookers.com/forum/viewtopic.php?f=8&t=13775		 Page 1 of 1
Author:  MrRocky [ Fri Jul 23, 2010 9:48 am ]
Post subject:  [W.A.] 1.6/baleno/vitara exhaust manifold
Just after a 1.6 exhaust manifold, cracked or otherwise to get a flange cut
the same as. Will pick up anywhere in the metro area
doesnt matter if its fwd or 4wd carby or efi.

cheers mick 0437 154 527
Author:  Joe [ Fri Jul 23, 2010 11:41 am ]
Post subject:  Re: [W.A.] 1.6/baleno/vitara exhaust manifold
MrRocky wrote:
Just after a 1.6 exhaust manifold, cracked or otherwise to get a flange cut
the same as. Will pick up anywhere in the metro area
doesnt matter if its fwd or 4wd carby or efi.

cheers mick 0437 154 527


The exhaust ports are different on these two arn't they :?
Author:  MrRocky [ Fri Jul 23, 2010 12:25 pm ]
Post subject:  Re: [W.A.] 1.6/baleno/vitara exhaust manifold
I dunno, just need to borrow one, worst case i will pull of my extractors and
use them to get a flange cut, I thought with every man and his dog doing a baleno conversion there would be some fwd manifolds kicking around.
Author:  Fatzook [ Fri Jul 23, 2010 12:33 pm ]
Post subject:  Re: [W.A.] 1.6/baleno/vitara exhaust manifold
MrRocky wrote:
Just after a 1.6 exhaust manifold, cracked or otherwise to get a flange cut
the same as. Will pick up anywhere in the metro area
doesnt matter if its fwd or 4wd carby or efi.

cheers mick 0437 154 527


Do you need an EFI 1.6 flange? I have some new ones here. $35 +post. Laser cut 12mm. :D
Author:  bakerboy [ Fri Jul 23, 2010 2:18 pm ]
Post subject:  Re: [W.A.] 1.6/baleno/vitara exhaust manifold
MrRocky wrote:
I dunno, just need to borrow one, worst case i will pull of my extractors and
use them to get a flange cut, I thought with every man and his dog doing a baleno conversion there would be some fwd manifolds kicking around.


hey man ill double check but im pretty certain we might have the baleno exhaust manifold floating around atm if you just need to borrow it, ill pm you matt's number, he would be the man to speak to about it
Author:  BlueSuzy [ Fri Jul 23, 2010 3:32 pm ]
Post subject:  Re: [W.A.] 1.6/baleno/vitara exhaust manifold
MrRocky wrote:
I dunno, just need to borrow one, worst case i will pull of my extractors and
use them to get a flange cut, I thought with every man and his dog doing a baleno conversion there would be some fwd manifolds kicking around.


I chucked mine as it was useless to me. Sorry i didnt keep it 2 years for you.
Author:  MrRocky [ Sun Jul 25, 2010 9:09 am ]
Post subject:  Re: [W.A.] 1.6/baleno/vitara exhaust manifold
cheers fatzook but i need 14mm as its going to be for a turbo manifold
If you can do me at that thickness let me know and i will grab one off you.
bakerboy i will give him a buzz, thanks
Author:  birko [ Mon Jul 26, 2010 9:54 am ]
Post subject:  Re: [W.A.] 1.6/baleno/vitara exhaust manifold
Quote:
Do you need an EFI 1.6 flange? I have some new ones here. $35 +post. Laser cut 12mm.


You have pm fatzook
Author:  Fatzook [ Mon Jul 26, 2010 9:58 am ]
Post subject:  Re: [W.A.] 1.6/baleno/vitara exhaust manifold
MrRocky wrote:
cheers fatzook but i need 14mm as its going to be for a turbo manifold
If you can do me at that thickness let me know and i will grab one off you.
bakerboy i will give him a buzz, thanks


This one is 12mm, and thats plenty thick enough for a turbo manifold. I should know, cos I've made a few. Standard flange thickness is 8mm.
Author:  Fatzook [ Mon Jul 26, 2010 10:01 am ]
Post subject:  Re: [W.A.] 1.6/baleno/vitara exhaust manifold
birko wrote:
Quote:
Do you need an EFI 1.6 flange? I have some new ones here. $35 +post. Laser cut 12mm.


You have pm fatzook


Yeah mate I just replied :oops: I get about 20-30 PM's a day, so it doesn't take long for them to get pushed back to page 4 :oops:

Pete
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/