| auszookers.com https://auszookers.com/forum/ |
|
| SWB Sierra rear shackle hanger thingys https://auszookers.com/forum/viewtopic.php?f=8&t=13847 |
Page 1 of 1 |
| Author: | Highway-Star [ Mon Jul 26, 2010 2:56 pm ] |
| Post subject: | SWB Sierra rear shackle hanger thingys |
Mainly am after a pair or 2 of the factory anti-inversion plates that are attached to these. Want to put them on the front of my Sierra to stop spring inversion. Only looking for local stuff (Near Ipswich, QLD), and cheap or free, and if I can get them in the next day or 2. Otherwise I'll make something up. Cheers PS: sorry if this makes no sense, its 1:30 in the morning... 
|
|
| Author: | steak_knife [ Mon Jul 26, 2010 8:35 pm ] |
| Post subject: | Re: SWB Sierra rear shackle hanger thingys |
I'm sure you have lot's of steel laying round, just make em..  
Or at least that's what Jas tell's me when I want to cut his chassis's up!!
|
|
| Author: | steak_knife [ Mon Jul 26, 2010 8:36 pm ] |
| Post subject: | Re: SWB Sierra rear shackle hanger thingys |
P.s. Thay only on rear of w/t's...... |
|
| Author: | tanshi [ Mon Jul 26, 2010 10:40 pm ] |
| Post subject: | Re: SWB Sierra rear shackle hanger thingys |
are there any on my spare chassis? if there are you can have them |
|
| Author: | BlueSuzy [ Mon Jul 26, 2010 11:06 pm ] |
| Post subject: | Re: SWB Sierra rear shackle hanger thingys |
Cut a piece of uni strut. |
|
| Author: | Highway-Star [ Tue Jul 27, 2010 12:08 am ] |
| Post subject: | Re: SWB Sierra rear shackle hanger thingys |
Yeah, might make my own, just hope I don't catch on fire again 
I'll go over and have a look Darren, but I thought the green chassis was bare these days. What do you mean by uni strut Bluesuzy? |
|
| Author: | tanshi [ Tue Jul 27, 2010 12:38 am ] |
| Post subject: | Re: SWB Sierra rear shackle hanger thingys |
i stole the front hangers and the fixed end of the rear but i thing the rear one is still there. just about ready to throw that chassis out 
|
|
| Author: | Highway-Star [ Tue Jul 27, 2010 12:46 am ] |
| Post subject: | Re: SWB Sierra rear shackle hanger thingys |
OK, they are still on the chassis 
When your dad gets home tonight, I'll see If I can bust into his shed and nick a power point. Thanks
|
|
| Author: | steak_knife [ Tue Jul 27, 2010 6:55 am ] |
| Post subject: | Re: SWB Sierra rear shackle hanger thingys |
BlueSuzy wrote: Cut a piece of uni strut.
 Is that a sexy walk a uni student does??
|
|
| Author: | BlueSuzy [ Fri Jul 30, 2010 3:13 pm ] |
| Post subject: | Re: SWB Sierra rear shackle hanger thingys |
Wow sorry late reply! http://www.connecttechnologiesinc.com/b ... uni_strut/ Unistrut is a quick fixing system for industrial usages, hanging stuff from walls or roofs etc.. Such as cable trays, piping etc. I made some new rear hangars for mine, then this was scrap at work, so i got some and cut 1 side out of it, so it looks kinda original. Otherwise you can always weld a plate on the back of the spring hangar. Pretty simple stuff. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|