| Author |
Message |
zot_boy
Joined: Tue Feb 09, 2010 10:30 pm Posts: 137 Location: gold coast
|
 Posted: Tue Aug 03, 2010 6:08 am |
|
im after some crawler gears 6.5:1 would be untimate  in a t case ready to go
|
|
|
|
|
jimbo_jones
az supporter
Joined: Sat Jul 19, 2008 11:30 pm Posts: 4361 Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti
|
Posted: Tue Aug 03, 2010 6:24 am |
|
|
|
|
finlay113
Joined: Wed Oct 21, 2009 10:30 pm Posts: 477 Location: ballarat
|
Posted: Tue Aug 03, 2010 6:44 am |
|
|
theres some on ebay at the minute
|
|
|
|
|
finlay113
Joined: Wed Oct 21, 2009 10:30 pm Posts: 477 Location: ballarat
|
Posted: Tue Aug 03, 2010 6:46 am |
|
|
|
|
89_tintop
az supporter
Joined: Fri Aug 07, 2009 11:30 pm Posts: 3159 Location: gold coast
|
Posted: Tue Aug 03, 2010 7:35 am |
|
|
Hey mate buy the gears and install them yourself..
If anything happens then a warranty claim can be made amd there wont be any hassles. That is speaking from personal experience.
I purchased a case from a guy, and was on the understanding that he purchased the gears and installed them himself. But it,works out,that,they were already a year old when I got them. Plus the 10months I had the, put them out of warranty.
Whem I stripped it to fimd what went wrong, found something like 6 or 7 teeth stripped.. Found all the stripped teeth im,there didnt add up,to,what was missing. I was down by about 1.5 to 2 teeths worth filings
|
|
|
|
|
Fatzook
az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
Posted: Tue Aug 03, 2010 7:38 am |
|
89_tintop wrote: Hey mate buy the gears and install them yourself..
If anything happens then a warranty claim can be made amd there wont be any hassles. That is speaking from personal experience.
I purchased a case from a guy, and was on the understanding that he purchased the gears and installed them himself. But it,works out,that,they were already a year old when I got them. Plus the 10months I had the, put them out of warranty.
Whem I stripped it to fimd what went wrong, found something like 6 or 7 teeth stripped.. Found all the stripped teeth im,there didnt add up,to,what was missing. I was down by about 1.5 to 2 teeths worth filings
Are you a CSI? 
_________________
2013 GV
1998 SV420 ute
|
|
|
|
|
89_tintop
az supporter
Joined: Fri Aug 07, 2009 11:30 pm Posts: 3159 Location: gold coast
|
Posted: Tue Aug 03, 2010 8:11 am |
|
Fatzook wrote: 89_tintop wrote: Hey mate buy the gears and install them yourself..
If anything happens then a warranty claim can be made amd there wont be any hassles. That is speaking from personal experience.
I purchased a case from a guy, and was on the understanding that he purchased the gears and installed them himself. But it,works out,that,they were already a year old when I got them. Plus the 10months I had the, put them out of warranty.
Whem I stripped it to fimd what went wrong, found something like 6 or 7 teeth stripped.. Found all the stripped teeth im,there didnt add up,to,what was missing. I was down by about 1.5 to 2 teeths worth filings Are you a CSI? Yeh.... I had my uv light out and all my other investigation equiptment... ran dna and all the other tests that I could do.........
Was sifting through the oil and something didnt add up... There wasnt enough teeth sitting in the bottom of the transfer.
So I went all csi amd started to piece together the bits... And came up with 2 teeth that werent anywhere.. A few little shards, but they could of come from some of the other teeth.
|
|
|
|
|
oozuk
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1452 Location: bethania QLD
|
Posted: Tue Aug 03, 2010 9:39 am |
|
89_tintop wrote: Fatzook wrote: 89_tintop wrote: Hey mate buy the gears and install them yourself..
If anything happens then a warranty claim can be made amd there wont be any hassles. That is speaking from personal experience.
I purchased a case from a guy, and was on the understanding that he purchased the gears and installed them himself. But it,works out,that,they were already a year old when I got them. Plus the 10months I had the, put them out of warranty.
Whem I stripped it to fimd what went wrong, found something like 6 or 7 teeth stripped.. Found all the stripped teeth im,there didnt add up,to,what was missing. I was down by about 1.5 to 2 teeths worth filings Are you a CSI? Yeh.... I had my uv light out and all my other investigation equiptment... ran dna and all the other tests that I could do......... Was sifting through the oil and something didnt add up... There wasnt enough teeth sitting in the bottom of the transfer. So I went all csi amd started to piece together the bits... And came up with 2 teeth that werent anywhere.. A few little shards, but they could of come from some of the other teeth. Did you check inside the transfer case for traces of semin ? 
_________________
building a bling zook .......will it ever be finis
|
|
|
|
|
89_tintop
az supporter
Joined: Fri Aug 07, 2009 11:30 pm Posts: 3159 Location: gold coast
|
Posted: Tue Aug 03, 2010 9:55 am |
|
|
The thing lit up under the uv light like a glow stick...... It was like thats what was used as lubrication.
still waiting for dna results .......
There is a suspect .... His story doesnt add up .... So hopefully the evidence doesnt lie
|
|
|
|
|
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
Posted: Tue Aug 03, 2010 11:09 am |
|
|
did you buy them from Shep or Royce?
lol
B4T
_________________
B4T
Built by me to be driven like a rental
|
|
|
|
|
Fatzook
az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
Posted: Tue Aug 03, 2010 11:22 am |
|
Built4thrashing wrote: did you buy them from Shep or Royce?
lol
B4T
Must have been Royce.
Shep is barron. 
_________________
2013 GV
1998 SV420 ute
|
|
|
|
|
zot_boy
Joined: Tue Feb 09, 2010 10:30 pm Posts: 137 Location: gold coast
|
Posted: Fri Aug 06, 2010 11:06 am |
|
haha thanks will prob be purchasing some new next friday and hopefully get them fitted before the comp
|
|
|
|
|
|
