auszookers.com • View topic - DEAD Hyundai Excel/Accent 1.6

Board index » Shift It And Find It » I Want it I Want it I want it

DEAD Hyundai Excel/Accent 1.6

Page 1 of 1

[ 16 posts ]

Print view

Previous topic | Next topic

Author

Message

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Sat Aug 28, 2010 1:26 am

Looking for a dead Hyundai Excel/Accent 1.6 engine.
Don't care if it has a hole in the block but would like it as complete as possible. Needs to have a flywheel.

Prefer free but will pay a fair amount.
Sunshine Coast if possible but can travel.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sat Aug 28, 2010 2:16 am

_________________
I used to be indecisive,
now I'm not so sure.....

Joe

I live here!

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Posted: Sat Aug 28, 2010 2:17 am

steak_knife wrote:

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sat Aug 28, 2010 3:05 am

Joe wrote:

steak_knife wrote:

whincup

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1588
Location: Gracemere, QLD
Vehicle: '94 suzuki maruti

Posted: Sat Aug 28, 2010 4:33 am

31zook wrote:

Joe wrote:

steak_knife wrote:

HYUNDAI??? :?:

esky

Joined: Fri May 30, 2008 11:30 pm
Posts: 115
Location: Melbourne

Posted: Sat Aug 28, 2010 8:07 am

excels, and the early accents were the 1.5 engine.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Sat Aug 28, 2010 9:03 am

esky wrote:

excels, and the early accents were the 1.5 engine.

Yep OK one of them.

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Sat Aug 28, 2010 9:32 am

ok I give up what for?

lizzard

Joined: Tue Apr 20, 2010 11:30 pm
Posts: 99
Location: sydneyhills.com.au

Posted: Sat Aug 28, 2010 9:57 am

shouldn't be hard to find a dead one they were dead from new

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sat Aug 28, 2010 10:00 am

ajsr wrote:

ok I give up what for?

I'm enjoying the suspense..

_________________
I used to be indecisive,
now I'm not so sure.....

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Sat Aug 28, 2010 10:00 am

ajsr wrote:

ok I give up what for?

Not telling.... YET.. :wink:

lizzard wrote:

shouldn't be hard to find a dead one they were dead from new

They make more power and more torque than a G16B :roll:

and are common as assholes.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sat Aug 28, 2010 10:05 am

want33s wrote:

ajsr wrote:

ok I give up what for?

Not telling.... YET.. :wink:

lizzard wrote:

shouldn't be hard to find a dead one they were dead from new

They make more power and more torque than a G16B :roll:

and are common as assholes.

no, please, no.

_________________
I used to be indecisive,
now I'm not so sure.....

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Sat Aug 28, 2010 10:08 am

Quote:

"1.5L Twin Cam - Twin Throttle Kit

While in the development of our new twin cam Excel blower kit our engineers came up with this unique manifold design to give your normally aspirated Excel more punch.

Featuring a heavily modified CAPA manifold (either buy it outright or exhange yours) and all of the plumbing, additional throttle body, throttle cable, revised engine management chip, and air filter assembly - the twin throttle kit represents an outstanding breakthrough in affordable power.

How does an additional 47% power gain sound, with an increase in torque of over 38% at 3000rpm. This translates into 1.9 seconds off your 0-100 km/h time, and a noticeable difference in bottom end power delivery when driving on the road. "

Quote from CAPA site.http://www.capa.com.au/kits_hyundai.htm

Self learning ECU as well :wink:

alex

az supporter

Joined: Sat Aug 16, 2008 11:30 pm
Posts: 2151
Location: Brissy
Vehicle: Nissan

Posted: Sat Aug 28, 2010 11:11 am

i have one but your not getting it :thefinger:

_________________
Pearce-toff Racing

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sat Aug 28, 2010 11:23 am

royce wrote:

Quote:

My first car was an Excel :oops:

, and I fitted one of these twin throttle body setups. It went like a cut snake after that. Sounded great too!! Not sure how it would work in a north-south configuration though

Self learning ECU as well :wink:

_________________
2013 GV
1998 SV420 ute

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Sat Aug 28, 2010 12:48 pm

want33s wrote:

ajsr wrote:

ok I give up what for?

Not telling.... YET.. :wink:

The posty Bike

_________________
Clearance Hole Technology

Page 1 of 1

[ 16 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum