to go in a 1.3
| auszookers.com https://auszookers.com/forum/ |
|
| Engine Mounts To Suit 1.6 Conversion https://auszookers.com/forum/viewtopic.php?f=8&t=15256 |
Page 1 of 2 |
| Author: | bek [ Mon Sep 20, 2010 9:38 am ] |
| Post subject: | Engine Mounts To Suit 1.6 Conversion |
anyone? need some asap! |
|
| Author: | daisy [ Mon Sep 20, 2010 9:39 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
to go in a 1.3 or 1 litre zook? |
|
| Author: | bek [ Mon Sep 20, 2010 9:43 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
to go in a 1.3
|
|
| Author: | daisy [ Mon Sep 20, 2010 9:45 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
get vl commodore engine mounts.. they'll do the job very efficently |
|
| Author: | stockman [ Mon Sep 20, 2010 9:47 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
I got mine off ebay. User id is kingswood country |
|
| Author: | bek [ Tue Sep 21, 2010 12:54 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
so no one has the suitable engine mounts? nooooooooo! |
|
| Author: | shep [ Tue Sep 21, 2010 12:57 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
zoook1 wrote: so no one has the suitable engine mounts? nooooooooo!
they are on your 1.3 
|
|
| Author: | steak_knife [ Tue Sep 21, 2010 2:58 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
shep wrote: zoook1 wrote: so no one has the suitable engine mounts? nooooooooo! they are on your 1.3 she got it with the dodge conversion done.. I have some 1.3 mount's here.. 
 But you gota get em..
|
|
| Author: | bek [ Tue Sep 21, 2010 9:58 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
lol steve, I need ones to suit the conversion not just normal 1.3 ones... but if you wanna find me some I'd really appreciate it 
|
|
| Author: | CairnsZook [ Tue Sep 21, 2010 11:05 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
stockman wrote: I got mine off ebay. User id is kingswood country
x2 Or, as Shep said, just use your existing mounts. |
|
| Author: | appsie [ Tue Sep 21, 2010 11:07 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
you have them allready,on your existing engine or does nothing really fit a coily 
|
|
| Author: | Highway-Star [ Tue Sep 21, 2010 11:24 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
I am a tad lost 
If it is any help, I think I still have the 1.3 to 1.6 adapter thing from my BenT 1.6 kit so you can use the stocko 1.3 mount on the drivers side. I run HiLux mounts so its no use to me. If you want the rubber bits, see most of the above posts
|
|
| Author: | CairnsZook [ Tue Sep 21, 2010 11:45 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
I was just assuming he has the Ben-T adapter kit. Doesn't everyone have the Ben-T kit?
|
|
| Author: | Joe [ Tue Sep 21, 2010 12:32 pm ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
CairnsZook wrote: I was just assuming she has the Ben-T adapter kit.
Doesn't everyone have the Ben-T kit?
|
|
| Author: | alex [ Tue Sep 21, 2010 12:41 pm ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
CairnsZook wrote: I was just assuming he has the Ben-T adapter kit.
Doesn't everyone have the Ben-T kit? no want33s and i run a petro works kit. and also you can buy these unbreakable engine mounts from them
http://www.petroworks.com/Products.php? ... ductID=218 also in my build thread: http://www.auszookers.com/index.php?nam ... &start=360 |
|
| Author: | bek [ Tue Sep 21, 2010 10:56 pm ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
you don't understand people, the 1.3 ones are fcked! the engine was mounted dodgy so the bonnet could should only found this out the other day and blahhh! so my car is ONCE AGAIN in pieces, I need the proper engine mounts I have just bought a body lift cause that might help the bonnet situation.. but ahhhhh!! |
|
| Author: | steak_knife [ Wed Sep 22, 2010 6:57 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
http://www.suzistore.com.au/shopexd.asp?id=137 Is that the bit you need?? That's an eng mount.. Take a pic, cause we've offered eng mount's & you say we don't understand.. I have everything for eng mount's fron the bit's that bolt to the eng to the bit's that bolt to the chassis... |
|
| Author: | squirezook [ Wed Sep 22, 2010 8:37 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
steak_knife wrote: http://www.suzistore.com.au/shopexd.asp?id=137
Is that the bit you need?? That's an eng mount.. Take a pic, cause we've offered eng mount's & you say we don't understand.. I have everything for eng mount's fron the bit's that bolt to the eng to the bit's that bolt to the chassis... Me to I have a box full of mounts here. Steel bits and rubber bits. You just gota come and get em |
|
| Author: | bek [ Thu Sep 23, 2010 12:40 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
steak_knife wrote: http://www.suzistore.com.au/shopexd.asp?id=137
Is that the bit you need?? That's an eng mount.. Take a pic, cause we've offered eng mount's & you say we don't understand.. I have everything for eng mount's fron the bit's that bolt to the eng to the bit's that bolt to the chassis... errrmmm.. that doesn't look like it :/ I'll have a proper look this arvo and get all the right info |
|
| Author: | steak_knife [ Fri Sep 24, 2010 10:08 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
Top pic is the passenger side eng mount's, 2nd is the driver's side.. What part are you after??
|
|
| Author: | bek [ Sat Sep 25, 2010 12:14 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
pretty sure I need the driver's side
|
|
| Author: | steak_knife [ Sat Sep 25, 2010 12:54 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
zoook1 wrote: pretty sure I need the driver's side Highway-Star wrote: I am a tad lost
If it is any help, I think I still have the 1.3 to 1.6 adapter thing from my BenT 1.6 kit so you can use the stocko 1.3 mount on the drivers side. I run HiLux mounts so its no use to me. If you want the rubber bits, see most of the above posts Well between Mr Star & me we have the entire driver's side mount's for a 1.6 to 1.3 conversion..
|
|
| Author: | bek [ Sat Sep 25, 2010 1:02 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
so who wants to bring me them?
|
|
| Author: | steak_knife [ Sat Sep 25, 2010 1:23 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
zoook1 wrote: so who wants to bring me them?
Santa????
|
|
| Author: | TZAR [ Sat Sep 25, 2010 1:32 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
zoook1 wrote: so who wants to bring me them?
Jebus can drop them off on the way through on his second coming. Don't get to give you a hand though cause he has troubloe holding small things in his hands. They tend to fall through the holes |
|
| Author: | bek [ Sat Sep 25, 2010 1:53 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
TZAR wrote: zoook1 wrote: so who wants to bring me them? Jebus can drop them off on the way through on his second coming. Don't get to give you a hand though cause he has troubloe holding small things in his hands. They tend to fall through the holes I don't get it... |
|
| Author: | Highway-Star [ Tue Sep 28, 2010 2:03 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
steak_knife wrote: zoook1 wrote: pretty sure I need the driver's side Highway-Star wrote: I am a tad lost If it is any help, I think I still have the 1.3 to 1.6 adapter thing from my BenT 1.6 kit so you can use the stocko 1.3 mount on the drivers side. I run HiLux mounts so its no use to me. If you want the rubber bits, see most of the above posts Well between Mr Star & me we have the entire driver's side mount's for a 1.6 to 1.3 conversion.. Do you want the 1.3 to 1.6 adapter bit I have? Ran into it looking for some LJ bits today... |
|
| Author: | steak_knife [ Tue Sep 28, 2010 6:36 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
Highway-Star wrote: Do you want the 1.3 to 1.6 adapter bit I have? Ran into it looking for some LJ bits today...  Are you ok??
|
|
| Author: | Highway-Star [ Tue Sep 28, 2010 7:17 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
steak_knife wrote: Highway-Star wrote: Do you want the 1.3 to 1.6 adapter bit I have? Ran into it looking for some LJ bits today... Are you ok?? might have to amputate!
|
|
| Author: | bek [ Wed Sep 29, 2010 1:37 am ] |
| Post subject: | Re: Engine Mounts To Suit 1.6 Conversion |
Highway-Star wrote: steak_knife wrote: zoook1 wrote: pretty sure I need the driver's side Highway-Star wrote: I am a tad lost If it is any help, I think I still have the 1.3 to 1.6 adapter thing from my BenT 1.6 kit so you can use the stocko 1.3 mount on the drivers side. I run HiLux mounts so its no use to me. If you want the rubber bits, see most of the above posts Well between Mr Star & me we have the entire driver's side mount's for a 1.6 to 1.3 conversion.. Do you want the 1.3 to 1.6 adapter bit I have? Ran into it looking for some LJ bits today... errrrrrrrrrrm.. I think so? I don't actually know lol
I think Steve knows what I need
|
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|