Hi!!!
I'm finding my self's in need of a 3 wire Maf for a Mitsubishi 1.6 16v vit eng.
If any one in briz has a know good one I could use to buy that would be awesome in the most extreem..
| auszookers.com https://auszookers.com/forum/ |
|
| Vit 3 wire MAF sensor ??????? https://auszookers.com/forum/viewtopic.php?f=8&t=15410 |
Page 1 of 2 |
| Author: | steak_knife [ Mon Sep 27, 2010 7:24 am ] |
| Post subject: | Vit 3 wire MAF sensor ??????? |
Hi!!!
I'm finding my self's in need of a 3 wire Maf for a Mitsubishi 1.6 16v vit eng. If any one in briz has a know good one I could use to buy that would be awesome in the most extreem..
|
|
| Author: | want33s [ Mon Sep 27, 2010 7:41 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
steak_knife wrote: Hi!!!
I'm finding my self's in need of a 3 wire Maf for VITARA 1.6 16v with Mitsubishi electrics. If any one in briz has a know good one I could use to test/buy that would be awesome in the most extreem.. Unconfused it for ya... |
|
| Author: | steak_knife [ Mon Sep 27, 2010 7:43 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
| Oh tar!!!
Cheer's for the thingy today, work's a treat!! 
|
|
| Author: | steak_knife [ Tue Sep 28, 2010 6:38 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
|
|
|
| Author: | steak_knife [ Tue Sep 28, 2010 12:39 pm ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
steak_knife wrote:
|
|
| Author: | steak_knife [ Fri Oct 01, 2010 1:01 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
steak_knife wrote: steak_knife wrote: 
|
|
| Author: | JrZook [ Fri Oct 01, 2010 1:32 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
Why's yours dead? didnt it work for Damo? |
|
| Author: | steak_knife [ Fri Oct 01, 2010 2:26 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
JrZook wrote: Why's yours dead? didnt it work for Damo?
Yep, but IFL was on on first start up & have run through the check's & it f*#ked.. |
|
| Author: | JrZook [ Fri Oct 01, 2010 3:43 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
steak_knife wrote: JrZook wrote: Why's yours dead? didnt it work for Damo? Yep, but IFL was on on first start up & have run through the check's & it f*#ked.. IFL? |
|
| Author: | want33s [ Fri Oct 01, 2010 5:27 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
JrZook wrote: IFL? Ignition Fucked Light. |
|
| Author: | steak_knife [ Fri Oct 01, 2010 5:39 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
want33s wrote: JrZook wrote: IFL? Ignition Fucked Light. Close.... It's F*#ked Light..
|
|
| Author: | Scrawny [ Fri Oct 01, 2010 6:36 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
My Prado has the IFL issue at the mo too..... |
|
| Author: | steak_knife [ Fri Oct 01, 2010 6:37 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
ScrawnC wrote: My Prado has the IFL issue at the mo too.....
Royce said to take the bulb out..
|
|
| Author: | steak_knife [ Fri Oct 01, 2010 6:38 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
steak_knife wrote: ScrawnC wrote: My Prado has the IFL issue at the mo too..... Royce said to take the bulb out.. But that won't help the fuel consumption.. 
|
|
| Author: | Scrawny [ Fri Oct 01, 2010 6:45 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
Is Royce living with you now?? |
|
| Author: | steak_knife [ Fri Oct 01, 2010 6:49 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
ScrawnC wrote: Is Royce living with you now??
Nar, I've been complaining to him about it. It's not like the MAF does much, just has air going through it..
|
|
| Author: | Scrawny [ Fri Oct 01, 2010 6:59 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
About what? Living with you? Are you sorting out who has what side of the bed? |
|
| Author: | steak_knife [ Fri Oct 01, 2010 7:09 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
ScrawnC wrote: About what? Living with you? Are you sorting out who has what side of the bed?
 Are the kid's getting to you Mr Scrawn??
|
|
| Author: | Scrawny [ Fri Oct 01, 2010 8:15 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
Just curious about what you're complaining to Royce about
|
|
| Author: | steak_knife [ Fri Oct 01, 2010 8:35 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
ScrawnC wrote: Just curious about what you're complaining to Royce about
IFL
|
|
| Author: | steak_knife [ Sat Oct 02, 2010 6:55 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
steak_knife wrote: steak_knife wrote: steak_knife wrote:
|
|
| Author: | steak_knife [ Mon Oct 04, 2010 7:01 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
|
|
|
| Author: | JrZook [ Mon Oct 04, 2010 10:36 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
Should go wrecker scrounging and find a similar 3 pin hot wire airflow meter for super cheep and we could try and get it to run on the 1.6 with some magic  if finding a vit one is gonna be a problem
|
|
| Author: | steak_knife [ Mon Oct 04, 2010 7:32 pm ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
Or you could do your magik & make em run on a MAP..
Ploblem solvered..
|
|
| Author: | JrZook [ Thu Oct 07, 2010 1:22 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
Can you get a graph of the MAF output voltage/air mass (grams/sec)? Or have a look at a working one with a scan tool and get me that data? I need to know stuff . Pref for both the 3 &5 wire meters.
|
|
| Author: | steak_knife [ Thu Oct 07, 2010 1:49 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
JrZook wrote: Can you get a graph of the MAF output voltage/air mass (grams/sec)? Or have a look at a working one with a scan tool and get me that data? I need to know stuff
. Pref for both the 3 &5 wire meters.Not sure how good the tech2 live data is, but should be able to graph it, bit the problem is, I need a good one to do such a graph.. Then I wouldn't need MAP tuned.. New non gen's are not cheap, not even going to look at gen.. 1/4 of the price of a atfermarket stand alone make's me think a new ECU would be a better option.,. http://www2.haltech.com.au/index.php?op ... &Itemid=88 Zoom zoom..
|
|
| Author: | JrZook [ Thu Oct 07, 2010 1:54 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
steak_knife wrote: JrZook wrote: Can you get a graph of the MAF output voltage/air mass (grams/sec)? Or have a look at a working one with a scan tool and get me that data? I need to know stuff . Pref for both the 3 &5 wire meters.Not sure how good the tech2 live data is, but should be able to graph it, bit the problem is, I need a good one to do such a graph.. Then I wouldn't need MAP tuned.. New non gen's are not cheap, not even going to look at gen.. 1/4 of the price of a atfermarket stand alone make's me think a new ECU would be a better option.,. http://www2.haltech.com.au/index.php?op ... &Itemid=88 Zoom zoom.. Can you get the MAF data from the service manuals or something? |
|
| Author: | steak_knife [ Thu Oct 07, 2010 2:11 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
JrZook wrote: Can you get the MAF data from the service manuals or something? I'll look, the diag you gave me is around the same as the book, don't have disc's for the vit's to old.. |
|
| Author: | steak_knife [ Thu Oct 07, 2010 2:45 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
http://www.tweakit.net/shop/product_inf ... ts_id=7545 Cheep.. It's on my "to do" list..
|
|
| Author: | JrZook [ Thu Oct 07, 2010 4:27 am ] |
| Post subject: | Re: Vit 3 wire MAF sensor ??????? |
steak_knife wrote: http://www.tweakit.net/shop/product_info.php?products_id=7545
Cheep.. It's on my "to do" list.. Reduction gears are cheep too!! Hurmmmm looks descent enough but still try and track down these MAF transfer graphs!!!
|
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|