just buy the ones i linked... even with freight you'd be saving a packet & they're tyres not tires.
| auszookers.com https://auszookers.com/forum/ |
|
| 16 inch rims (WA) https://auszookers.com/forum/viewtopic.php?f=8&t=15981 |
Page 1 of 1 |
| Author: | smiffkid [ Sun Oct 17, 2010 8:04 am ] |
| Post subject: | 16 inch rims (WA) |
Just a weird question, i want to know of what 16 inch rims will fit on a suzuki jimny, after 4 as i have a set of play tires that are 31x8r 16. any condition as long as there functional... |
|
| Author: | alien [ Sun Oct 17, 2010 9:32 am ] |
| Post subject: | Re: 16 inch rims (WA) |
GV rims fit i think, but not sure what the offset is. |
|
| Author: | matty_wall [ Sun Oct 17, 2010 9:42 am ] |
| Post subject: | Re: 16 inch rims (WA) |
alien wrote: GV rims fit i think, but not sure what the offset is.
i think the steel ones are 16x7 5P |
|
| Author: | TZAR [ Mon Oct 18, 2010 4:59 am ] |
| Post subject: | Re: 16 inch rims (WA) |
Lada niva |
|
| Author: | TZAR [ Mon Oct 18, 2010 5:00 am ] |
| Post subject: | Re: 16 inch rims (WA) |
or check this link for wheels with pcd of 5x139.7mm (5.5inches) http://www.ladaniva.co.uk/baxter/resour ... rnList.htm |
|
| Author: | smiffkid [ Mon Oct 18, 2010 5:30 am ] |
| Post subject: | Re: 16 inch rims (WA) |
does any body have a set for sale. steels would be great but alloys would be fine |
|
| Author: | atari4x4 [ Mon Oct 18, 2010 7:20 am ] |
| Post subject: | Re: 16 inch rims (WA) |
buy these... http://auszookers.com/index.php?name=Fo ... ic&t=11006 |
|
| Author: | smiffkid [ Mon Oct 18, 2010 12:10 pm ] |
| Post subject: | Re: 16 inch rims (WA) |
to far away, does any body have a set of rims i can borrow, must be 16s tho. will give them back ince tires a worn out witch i dnt think would take long |
|
| Author: | smiffkid [ Tue Oct 19, 2010 8:33 am ] |
| Post subject: | Re: 16 inch rims (WA) |
Bump, no body has 16 inch rims sittin around.... |
|
| Author: | alien [ Tue Oct 19, 2010 8:35 am ] |
| Post subject: | Re: 16 inch rims (WA) |
see how much suzistore want for a set maybe... then sell them when youre done perhaps? |
|
| Author: | smiffkid [ Tue Oct 19, 2010 8:45 am ] |
| Post subject: | Re: 16 inch rims (WA) |
yea, just thought about that. but they would prob 600 dollars for a set. and they will prob get pretty scratched. you guys will love to see my play tires once there on the car... |
|
| Author: | atari4x4 [ Tue Oct 19, 2010 8:46 am ] |
| Post subject: | Re: 16 inch rims (WA) |
just buy the ones i linked... even with freight you'd be saving a packet & they're tyres not tires.
|
|
| Author: | smiffkid [ Tue Oct 19, 2010 8:54 am ] |
| Post subject: | Re: 16 inch rims (WA) |
cheers for that common spelling mistake. |
|
| Author: | smiffkid [ Tue Oct 19, 2010 9:00 am ] |
| Post subject: | Re: 16 inch rims (WA) |
16x7 is to wide unless i leave them pumped up all the time. will keep looking but there still in the back of my mind, could always bead lock them |
|
| Author: | matty_wall [ Tue Oct 19, 2010 9:07 am ] |
| Post subject: | Re: 16 inch rims (WA) |
ive never heard of a 31x8r16. you could try 16 sierra/lj rims. may not be wide enough, but maybe not. someone else may be able to clarify. |
|
| Author: | smiffkid [ Tue Oct 19, 2010 9:10 am ] |
| Post subject: | Re: 16 inch rims (WA) |
31x8r16 is not a road vehicle tire. its made for split rims mostly. |
|
| Author: | matty_wall [ Tue Oct 19, 2010 9:14 am ] |
| Post subject: | Re: 16 inch rims (WA) |
ahh i see.. i reckon you should try to get your hands on one 16 sierra rim. fit it and see how it goes for clearance. |
|
| Author: | steak_knife [ Tue Oct 19, 2010 9:15 am ] |
| Post subject: | Re: 16 inch rims (WA) |
smiffkid wrote: 31x8r16
is not a road vehicle tire. its made for split rims mostly.  haven't had the pleasure to fit one of them in yr's..
|
|
| Author: | smiffkid [ Tue Oct 19, 2010 9:40 am ] |
| Post subject: | Re: 16 inch rims (WA) |
yea but lucky that way. the 31s will fit no worries, offset isnt a drama either as i have 31x10.5 on the now with an off set of 22 on the rims. will ring suzi store and see if they have a set of old 16 inch steelies out the back. |
|
| Author: | smiffkid [ Wed Oct 20, 2010 8:47 am ] |
| Post subject: | Re: 16 inch rims (WA) |
sorced a set of 16s, brand new so will see what deal i get with them. |
|
| Author: | smiffkid [ Sun Oct 24, 2010 10:11 am ] |
| Post subject: | Re: 16 inch rims (WA) |
the 16s i found form a tire dealer where actually 15s. silly buggers. so in need of rims again. surely some 1 that has a vit would with after market rims would have the 16s sittin in the back yard |
|
| Author: | Joe [ Sun Oct 24, 2010 10:25 am ] |
| Post subject: | Re: 16 inch rims (WA) |
I just remembered suzistore sell 16inch hilux split rims with sierra centers welded in im not to sure on price though 
|
|
| Author: | smiffkid [ Sun Oct 24, 2010 11:11 am ] |
| Post subject: | Re: 16 inch rims (WA) |
yea. split rims would be perfect fr my tire. might have to give them a call about it. cheers joe |
|
| Author: | alien [ Sun Oct 24, 2010 12:08 pm ] |
| Post subject: | Re: 16 inch rims (WA) |
worst case scenario - i know a guy who makes custom rims - will post his info when i get mine made up so you lot dont go overloading him with work before mine are done =D |
|
| Author: | hooki [ Sun Oct 24, 2010 5:51 pm ] |
| Post subject: | Re: 16 inch rims (WA) |
all this for tractor tyres 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|