auszookers.com
https://auszookers.com/forum/

16b coil and ignitor to borrow
https://auszookers.com/forum/viewtopic.php?f=8&t=17368		 Page 1 of 1
Author:  boostedbrick [ Wed Dec 08, 2010 6:54 am ]
Post subject:  16b coil and ignitor to borrow
As above looking to borrow a g16b coil/igniter for a few hours around brisbane. All i want to do is plug it in a see if my heap runs.. Offering some alcohol in return.

Cheers Jamie
Author:  steak_knife [ Wed Dec 08, 2010 6:57 am ]
Post subject:  Re: 16b coil and ignitor to borrow
Yours is Denso yer??
Just so you don't get a Mitsubishi one...
Author:  boostedbrick [ Wed Dec 08, 2010 6:59 am ]
Post subject:  Re: 16b coil and ignitor to borrow
Yer forgot to add that :) its a denso.
Author:  JrZook [ Wed Dec 08, 2010 9:53 am ]
Post subject:  Re: 16b coil and ignitor to borrow
Did you end up checking for injector pulses?
Author:  steak_knife [ Wed Dec 08, 2010 9:57 am ]
Post subject:  Re: 16b coil and ignitor to borrow
JrZook wrote:
Did you end up checking for injector pulses?


I have a set of noid's here if needed...
Author:  boostedbrick [ Wed Dec 08, 2010 10:13 am ]
Post subject:  Re: 16b coil and ignitor to borrow
Yer didnt check, no one i asked had noid lights.. Ill send you a PM dude
Author:  boost=money [ Wed Dec 08, 2010 9:45 pm ]
Post subject:  Re: 16b coil and ignitor to borrow
I have coil and igniter.
Author:  JrZook [ Wed Dec 08, 2010 11:30 pm ]
Post subject:  Re: 16b coil and ignitor to borrow
Well the other comp didnt work for ya so you have narrowed it down to, ignitor/coil, dizzy pickup or dodgy wiring. So get a noidie onto those injectors see if the comp is sending out any pulses while cranking. If not its very likely the dizzy pickup/wiring has issues and not the ignitor.
Author:  boostedbrick [ Thu Dec 09, 2010 7:27 am ]
Post subject:  Re: 16b coil and ignitor to borrow
Ok its got no injector pulse. starting tracing wireing.. boost=money thanks for the offer.
Author:  steak_knife [ Thu Dec 09, 2010 7:52 am ]
Post subject:  Re: 16b coil and ignitor to borrow
It's not something stupid like the tacho wire earthing??
Author:  JrZook [ Thu Dec 09, 2010 8:03 am ]
Post subject:  Re: 16b coil and ignitor to borrow
steak_knife wrote:
It's not something stupid like the tacho wire earthing??


COuld be something like that. Also check the wires and connections out of the dissy as on these engines this is the only source of rpm and cam position to the ecu. Without it, no pulses to nuffin!
Author:  steak_knife [ Thu Dec 09, 2010 8:05 am ]
Post subject:  Re: 16b coil and ignitor to borrow
:roll: This is going to end up in suzuki talk :lol: :lol:
Author:  boostedbrick [ Thu Dec 09, 2010 8:53 am ]
Post subject:  Re: 16b coil and ignitor to borrow
Tacho what? i got a limiter for that. But its not earthing anywhere.
The two wires from the dizzy, from the plug near the dizzy to ecu has a circuit. The wires from that plug to dizzy seem fine.
The ecu earth is good.
The earth that runs to condenser/noise filter is good.
I have 12v+ at the BW to the coil
12v+ to the BW to the igniter

ive missed something i think
Author:  steak_knife [ Thu Dec 09, 2010 9:01 am ]
Post subject:  Re: 16b coil and ignitor to borrow
are you getting pulse out of the dizzy??
Author:  boostedbrick [ Thu Dec 09, 2010 9:15 am ]
Post subject:  Re: 16b coil and ignitor to borrow
You mean the two wires to the dizzy..
Does the ecu send a signal to the dizzy, that then comes back to the ecu?
Author:  JrZook [ Thu Dec 09, 2010 9:20 am ]
Post subject:  Re: 16b coil and ignitor to borrow
boostedbrick wrote:
You mean the two wires to the dizzy..
Does the ecu send a signal to the dizzy, that then comes back to the ecu?


The dissy is the signal generator (magnetic reluctor). This is sent to the ECU.
Author:  boostedbrick [ Thu Dec 09, 2010 9:37 am ]
Post subject:  Re: 16b coil and ignitor to borrow
Okay.. how would you test it?

I hooked one wire of the wires straight to earth, then the other to my test light, and the other end to positive. whice i figured would give me signal when i spun the dizzy but it didnt..
Author:  JrZook [ Thu Dec 09, 2010 9:42 am ]
Post subject:  Re: 16b coil and ignitor to borrow
boostedbrick wrote:
Okay.. how would you test it?

I hooked one wire of the wires straight to earth, then the other to my test light, and the other end to positive. whice i figured would give me signal when i spun the dizzy but it didnt..


Noooo!! Do you have a multimeter? You will need to check the resistance between the two wires out of the dizzy. Besides that the only other way is to again connect up the multimeter to the 2 dissy wires, crank teh engine and check for a fluctuating voltage. Should only be a couple of volts.
Author:  boostedbrick [ Thu Dec 09, 2010 9:46 am ]
Post subject:  Re: 16b coil and ignitor to borrow
I tried it with the multimetetr earlier and there was nothing showing, voltage or resistance.
Author:  JrZook [ Thu Dec 09, 2010 10:07 am ]
Post subject:  Re: 16b coil and ignitor to borrow
boostedbrick wrote:
I tried it with the multimetetr earlier and there was nothing showing, voltage or resistance.


Then thats your issue!! Try another dissy
Author:  boostedbrick [ Fri Dec 10, 2010 6:27 am ]
Post subject:  Re: 16b coil and ignitor to borrow
Had a play with it today, and the dizzy is fine. The wire had a break in it.. So I fixed it and nothing changed. Im guessing the break happend sometime when ive been moving wires around to find the problem.
Author:  JrZook [ Mon Dec 13, 2010 11:01 pm ]
Post subject:  Re: 16b coil and ignitor to borrow
boostedbrick wrote:
Had a play with it today, and the dizzy is fine. The wire had a break in it.. So I fixed it and nothing changed. Im guessing the break happend sometime when ive been moving wires around to find the problem.


Ok so if your trace the wires back to the computer and measure the resistance there (comp unpluged) do you get the same reading as measuring straight from the dizzy?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/