| auszookers.com https://auszookers.com/forum/ |
|
| dw. Suzy Sold! https://auszookers.com/forum/viewtopic.php?f=8&t=17499 |
Page 1 of 1 |
| Author: | BlueSuzy [ Tue Dec 14, 2010 12:22 am ] |
| Post subject: | dw. Suzy Sold! |
As title asks, Does anyone have some laying around? All mine are welded or smashed. Converting a front 4pin carrier to a rear. Preferable syd area, but post can be an option, |
|
| Author: | 31zook [ Tue Dec 14, 2010 12:47 am ] |
| Post subject: | Re: Rear Sierra side gears |
have you still got suzy? |
|
| Author: | BlueSuzy [ Tue Dec 14, 2010 1:01 am ] |
| Post subject: | Re: Rear Sierra side gears |
yes I think the locker is putting people off..according to the people looking at her "poll". |
|
| Author: | lump_a_charcoal [ Tue Dec 14, 2010 6:12 am ] |
| Post subject: | Re: Rear Sierra side gears |
I had a set of fronts... |
|
| Author: | zooker [ Tue Dec 14, 2010 6:42 am ] |
| Post subject: | Re: Rear Sierra side gears |
I stole your last set of rears peaceout |
|
| Author: | BlueSuzy [ Tue Dec 14, 2010 7:33 am ] |
| Post subject: | Re: Rear Sierra side gears |
Givem back! Lol. Oh well. Cant predict the future. |
|
| Author: | appsie [ Tue Dec 14, 2010 8:36 am ] |
| Post subject: | Re: Rear Sierra side gears |
i have a complete carrier here tim.i not long ago payed 40 for it plus post off jas. Would part with again if it helped you out but i think lumpa had one on offer aswell,maybe hit him up |
|
| Author: | lump_a_charcoal [ Tue Dec 14, 2010 10:41 am ] |
| Post subject: | Re: Rear Sierra side gears |
lol |
|
| Author: | BlueSuzy [ Tue Dec 14, 2010 11:16 am ] |
| Post subject: | Re: Rear Sierra side gears |
I got this front 4pin from Lumpa! But keep helping everyone, its good |
|
| Author: | alien [ Tue Dec 14, 2010 12:09 pm ] |
| Post subject: | Re: Rear Sierra side gears |
BlueSuzy wrote: yes
I think the locker is putting people off..according to the people looking at her "poll". wtf?! how does a locker put them off!? farkin retards! |
|
| Author: | atari4x4 [ Tue Dec 14, 2010 12:21 pm ] |
| Post subject: | Re: Rear Sierra side gears |
it's not really a "locker"... more a full spool aka CIG locker. |
|
| Author: | BlueSuzy [ Tue Dec 14, 2010 11:21 pm ] |
| Post subject: | Re: Rear Sierra side gears |
I think i need to make suz more rough so the retards+p platers stay away.. Last lookers were Lesbians from bondi.. Wanted to know the height clearance.. aka ROOF CLEARANCE!!! WTF! they were not 4wders. 9.5/10ths of suz would of been pointless for them. Thanks for the offer appsie, will keep u in mind. we'll see. But yeah! Side gears only! who has some!? |
|
| Author: | lump_a_charcoal [ Tue Dec 14, 2010 11:47 pm ] |
| Post subject: | Re: Rear Sierra side gears |
Tried Pick'n'Payyourmum? |
|
| Author: | BlueSuzy [ Tue Dec 14, 2010 11:50 pm ] |
| Post subject: | Re: Rear Sierra side gears |
na not yet. but i should! Maybe tomorrow on the way to minchinbury.. |
|
| Author: | bohuler [ Wed Dec 15, 2010 8:42 am ] |
| Post subject: | Re: Rear Sierra side gears |
I have a rear diff from a SJ50. The bugger has been driven over a barb wire fence and forced the wire into the pinion seal, pretty much munting the diff. If you can wait till the weekend, I should be able to pull it off and send it your way. Its an 86 n/t, so its those gears. Also, i've not pulled the diff apart before, are the side gears easy to get off? |
|
| Author: | BlueSuzy [ Wed Dec 15, 2010 9:15 am ] |
| Post subject: | Re: Rear Sierra side gears |
yep, may need a rattle gun, or a spanner and a hammer to get the crownwheel gear off to pull pins out to pull gears out... But simple job. Just after the 2 gears with the splines for the axles. |
|
| Author: | bohuler [ Thu Dec 16, 2010 7:36 am ] |
| Post subject: | Re: Rear Sierra side gears |
Will i bugger the crown wheel? I was hoping if its in good nick to keep it as a spare. |
|
| Author: | BlueSuzy [ Thu Dec 16, 2010 10:03 pm ] |
| Post subject: | Re: Rear Sierra side gears |
Na. How much did you want for them? If too much, not worth your troubles. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|