auszookers.com :: View topic - lj80 front brake drum

Need front lj80 front brake hub dose not have to have good brake surface as long as the spline is good thanks, JIM

What do you mean when you say "cut it up"

2stroker wrote:

What do you mean when you say "cut it up"

Its for there disc brake conversion using standard CVs as 1 litre CVs are not very easy to obtain in america. Meaning impossible

TZAR wrote:

2stroker wrote:

What do you mean when you say "cut it up"

Its for there disc brake conversion using standard CVs as 1 litre CVs are not very easy to obtain in america. Meaning impossible

beyond impossible none anywhere I guess its the same for lj80 front drums also. Seems like someone have an old drum laying around. Kinda in a hard place right now cant find a drum and no sammys around to steal a front axle assy off of. Anyone have any suggestion on I how I can repair this lj80 front thanks. JIM

Beyond impossible none anywhere I guess its the same for lj80 front drums also. Seems like someone have an old drum laying around. Kinda in a hard place right now cant find a drum and no sammys around to steal a front axle assy off of. Anyone have any suggestion on I how I can repair this lj80 front thanks. JIM

j860112 wrote:

There is a write-up on converting to the Samurai disk hubs HERE. All you will need to find are 1.0lt/SJ410 CV's which will be lighter and smaller to post than an LJ brake drum/hub. I'm sure someone here might help you out to find a pair.

Brand new ones available HERE and HERE. The pictures look like stock photos of generic CVs, not specifically SJ410.

Samurai front axle in the States listed HERE. OK, it is the opposite side of the country, but they're definately available, probably much closer to you.

Author:	j860112 [ Thu Dec 16, 2010 3:14 am ]
Post subject:	lj80 front brake drum
Need front lj80 front brake hub dose not have to have good brake surface as long as the spline is good thanks, JIM

Author:	hutch [ Thu Dec 16, 2010 3:25 am ]
Post subject:	Re: lj80 front brake drum
j860112 wrote: Need front lj80 front brake hub dose not have to have good brake surface as long as the spline is good thanks, JIM USA... gday! Might have one down the shed. Might have a look later if I could be bothered getting off my arse. You happy to pay feight to USA?

Author:	j860112 [ Thu Dec 16, 2010 3:32 am ]
Post subject:	Re: lj80 front brake drum
Yes will pay freight to USA thanks, JIM

Author:	2stroker [ Thu Dec 16, 2010 9:35 pm ]
Post subject:	Re: lj80 front brake drum
Hey champ, so what is the LJ scene like in USA, they are geting hard to find over here in Australia. Some of my growing collection

Author:	j860112 [ Fri Dec 17, 2010 2:29 am ]
Post subject:	Re: lj80 front brake drum
You got some nice looking lj Suzuki. Not to many here in the states they were not sold here in large numbers until 1986. Would you have a brake drum laying around in your spare parts by chance would really like to git my lj80 back on the road thanks, JIM

auszookers.com https://auszookers.com/forum/

lj80 front brake drum https://auszookers.com/forum/viewtopic.php?f=8&t=17550	Page 1 of 1

Author:	TZAR [ Fri Dec 17, 2010 3:27 am ]
Post subject:	Re: lj80 front brake drum
http://www.suzistore.com.au/shopexd.asp?id=802 brand new $195.00

Author:	j860112 [ Fri Dec 17, 2010 1:02 pm ]
Post subject:	Re: lj80 front brake drum
Do not want a new one going to cut it up and they want $195.00 plus $135.00 shipping a little to much for me

Author:	2stroker [ Sat Dec 18, 2010 2:07 am ]
Post subject:	Re: lj80 front brake drum
What do you mean when you say "cut it up"

Author:	hutch [ Sat Dec 18, 2010 2:46 am ]
Post subject:	Re: lj80 front brake drum
OK I have given all my old ones away. The only one I have is on the steel scrap heap, it has been cut through the spline section. sorry.

Author:	TZAR [ Sat Dec 18, 2010 5:41 am ]
Post subject:	Re: lj80 front brake drum
2stroker wrote: What do you mean when you say "cut it up" Its for there disc brake conversion using standard CVs as 1 litre CVs are not very easy to obtain in america. Meaning impossible

Author:	j860112 [ Sat Dec 18, 2010 11:53 pm ]
Post subject:	Re: lj80 front brake drum
TZAR wrote: 2stroker wrote: What do you mean when you say "cut it up" Its for there disc brake conversion using standard CVs as 1 litre CVs are not very easy to obtain in america. Meaning impossible beyond impossible none anywhere I guess its the same for lj80 front drums also. Seems like someone have an old drum laying around. Kinda in a hard place right now cant find a drum and no sammys around to steal a front axle assy off of. Anyone have any suggestion on I how I can repair this lj80 front thanks. JIM

Author:	Highway-Star [ Sun Dec 19, 2010 1:59 am ]
Post subject:	Re: lj80 front brake drum
j860112 wrote: TZAR wrote: 2stroker wrote: What do you mean when you say "cut it up" Its for there disc brake conversion using standard CVs as 1 litre CVs are not very easy to obtain in america. Meaning impossible beyond impossible none anywhere I guess its the same for lj80 front drums also. Seems like someone have an old drum laying around. Kinda in a hard place right now cant find a drum and no sammys around to steal a front axle assy off of. Anyone have any suggestion on I how I can repair this lj80 front thanks. JIM It would probably be cheaper to get someone to send you over a few 410 CV's, and then use Samurai swivel hubs. Surely with a bit of hunting around you can get yourself a Samurai front diff. I do have some front drums, but they are in good shape, and sorry I don't want to see good ones get hacked up.

Author:	303zuke [ Sun Dec 19, 2010 12:01 pm ]
Post subject:	Re: lj80 front brake drum
j860112 wrote: Beyond impossible none anywhere I guess its the same for lj80 front drums also. Seems like someone have an old drum laying around. Kinda in a hard place right now cant find a drum and no sammys around to steal a front axle assy off of. Anyone have any suggestion on I how I can repair this lj80 front thanks. JIM There is a write-up on converting to the Samurai disk hubs HERE. All you will need to find are 1.0lt/SJ410 CV's which will be lighter and smaller to post than an LJ brake drum/hub. I'm sure someone here might help you out to find a pair.

Author:	j860112 [ Sun Dec 19, 2010 1:11 pm ]
Post subject:	Re: lj80 front brake drum
303zuke wrote: j860112 wrote: Beyond impossible none anywhere I guess its the same for lj80 front drums also. Seems like someone have an old drum laying around. Kinda in a hard place right now cant find a drum and no sammys around to steal a front axle assy off of. Anyone have any suggestion on I how I can repair this lj80 front thanks. JIM There is a write-up on converting to the Samurai disk hubs HERE. All you will need to find are 1.0lt/SJ410 CV's which will be lighter and smaller to post than an LJ brake drum/hub. I'm sure someone here might help you out to find a pair. Ok dose anyone out there have a pair of s410 CV,s

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	303zuke [ Sun Dec 19, 2010 9:53 pm ]
Post subject:	Re: lj80 front brake drum
Brand new ones available HERE and HERE. The pictures look like stock photos of generic CVs, not specifically SJ410. Samurai front axle in the States listed HERE. OK, it is the opposite side of the country, but they're definately available, probably much closer to you.

Author:	j860112 [ Wed Jan 19, 2011 12:25 am ]
Post subject:	Re: lj80 front brake drum
303zuke wrote: Brand new ones available HERE and HERE. The pictures look like stock photos of generic CVs, not specifically SJ410. Samurai front axle in the States listed HERE. OK, it is the opposite side of the country, but they're definately available, probably much closer to you. Yes you gave me a source they where 49.00 each and 125.99 for shipping and the other source for the 1988 axle the axle was the houseing only did not include the parts I need for the change the total would have been over 500.00 and still would not have all the parts I would need sorry I am just poor old retired army guy I cant afford to spend that amount the whole lj80 cost less than that but thanks for the help anyway j860112

Author:	303zuke [ Wed Jan 19, 2011 8:31 pm ]
Post subject:	Re: lj80 front brake drum
Well, postage on a second hand LJ brake drum won't be any cheaper than a pair of CVs, they're a solid chunk of iron.

Author:	3cyl [ Fri Jan 21, 2011 7:43 pm ]
Post subject:	Re: lj80 front brake drum
I have some old drums here but surely the cost of postage would be more than they're worth? On my LJ50 I originally used 410 CVs but found them hard to get and easy to break, (lockrights don't help). Atm I'm running 1.3 CVs with heat treated 4140 custom shafts. There are 2 sets here, 1 has strengthened CVs and 1 has normal ones. Soon I'll have CrMo CVs with 26 spline shafts to go in and will probably sell the old ones. One set have never been used the strengthened ones have only done a thousand k's or so after all it is an LJ50..