thanks guys. those cv's on that ebay link are $199 and i can get some from burleigh for 160.. cheers for the help
| auszookers.com https://auszookers.com/forum/ |
|
| vitara cv's https://auszookers.com/forum/viewtopic.php?f=8&t=17663 |
Page 1 of 1 |
| Author: | tonka_tuff [ Tue Dec 21, 2010 9:04 am ] |
| Post subject: | vitara cv's |
hey guys just wondering where i could get some cv's and for what price?? i live on the gold coast.. cheers. |
|
| Author: | atari4x4 [ Tue Dec 21, 2010 9:11 am ] |
| Post subject: | Re: vitara cv's |
i get mine from ebay. $140 |
|
| Author: | matty_wall [ Tue Dec 21, 2010 9:12 am ] |
| Post subject: | Re: vitara cv's |
Ebay ive had ebay ones in mine for 2 years with no dramas. http://shop.ebay.com.au/?_from=R40&_trk ... Categories |
|
| Author: | 89_tintop [ Tue Dec 21, 2010 9:43 am ] |
| Post subject: | Re: vitara cv's |
there is a place at burleigh called coastal cvs (or somethimg like that) give them a call |
|
| Author: | Mugwui [ Tue Dec 21, 2010 10:01 am ] |
| Post subject: | Re: vitara cv's |
I've got left & right cv's 26 spline here if your interested. Came out of a 95 SWB Vit. |
|
| Author: | buzbox [ Tue Dec 21, 2010 11:31 pm ] |
| Post subject: | Re: vitara cv's |
matty_wall wrote: Ebay
ive had ebay ones in mine for 2 years with no dramas. http://shop.ebay.com.au/?_from=R40&_trk ... Categories My ebay ones broke and at the first obsticle when I took it out wheeling, I just get 2nd handers from Suzifour, cost about $60 each. I usually just go up there and pick the ones that the boots look ok. I took the ebay ones back to the guy's workshop and I got a refund, He is chinese so obviously he must have them imported from china. |
|
| Author: | BlueSuzy [ Tue Dec 21, 2010 11:55 pm ] |
| Post subject: | Re: vitara cv's |
If you need transport. refer to my chat thread.. |
|
| Author: | atari4x4 [ Wed Dec 22, 2010 12:03 am ] |
| Post subject: | Re: vitara cv's |
buzbox wrote: matty_wall wrote: Ebay ive had ebay ones in mine for 2 years with no dramas. http://shop.ebay.com.au/?_from=R40&_trk ... Categories My ebay ones broke and at the first obsticle when I took it out wheeling, I just get 2nd handers from Suzifour, cost about $60 each. I usually just go up there and pick the ones that the boots look ok. I took the ebay ones back to the guy's workshop and I got a refund, He is chinese so obviously he must have them imported from china. I run ebay CV's & they're holding up to being used with 31's & a air locker, I did break an original Suzuki CV that was about 130,000kms old, but it was getting some serious load put through it. |
|
| Author: | tonka_tuff [ Wed Dec 22, 2010 4:52 am ] |
| Post subject: | Re: vitara cv's |
thanks guys. those cv's on that ebay link are $199 and i can get some from burleigh for 160.. cheers for the help
|
|
| Author: | canberramav [ Wed Dec 22, 2010 9:12 am ] |
| Post subject: | Re: vitara cv's |
Ive got a pair to sell from a 93 LWB Vitara |
|
| Author: | tonka_tuff [ Wed Dec 22, 2010 9:15 am ] |
| Post subject: | Re: vitara cv's |
how much? and what cond. are the boots in etc?? |
|
| Author: | atari4x4 [ Wed Dec 22, 2010 9:18 am ] |
| Post subject: | Re: vitara cv's |
do you know if you vitara is 22 or 26 spline? |
|
| Author: | canberramav [ Wed Dec 22, 2010 6:18 pm ] |
| Post subject: | Re: vitara cv's |
Im not sure of the spline count. Its a manual LWB 93 model estate. Im going to be pulling them out over the the next week so i will check for you. Boots are good. Cheers |
|
| Author: | tonka_tuff [ Wed Dec 22, 2010 8:40 pm ] |
| Post subject: | Re: vitara cv's |
mine is a swb 1991 vit ill have to also take them off and have a look.. cheers atari
|
|
| Author: | mighty_vites [ Sat Dec 25, 2010 7:18 am ] |
| Post subject: | Re: vitara cv's |
 i hope that got some attention because i dont want to start a new thread for this question...
are the CV's different between LWB and SWB vitara??? spline for eg. http://cgi.ebay.com.au/CV-SHAFTS-SUZUKI ... 2035wt_905 curious because i want these to fit my LWB. thanks all |
|
| Author: | Joe [ Sat Dec 25, 2010 7:22 am ] |
| Post subject: | Re: vitara cv's |
mighty_vites wrote: :rambo: i hope that got some attention because i dont want to start a new thread for this question...
are the CV's different between LWB and SWB vitara??? spline for eg. http://cgi.ebay.com.au/CV-SHAFTS-SUZUKI ... 2035wt_905 curious because i want these to fit my LWB. thanks all No differance between LWB and SWB, only differance is spline count, 22 or 26 depending on what year your vitara is |
|
| Author: | mighty_vites [ Sat Dec 25, 2010 7:39 am ] |
| Post subject: | Re: vitara cv's |
i own a 94 LWB and these cvs im looking at says its for a carby model only which is usually a SWB to my knowledge |
|
| Author: | royce [ Sat Dec 25, 2010 7:42 am ] |
| Post subject: | Re: vitara cv's |
yeah that ad is a bit messed up, al 1.6 are the same length but different spline on the drivers inner, all carb will be 22 spline, yours is likely 2 spline as well but I dont know when they changed |
|
| Author: | atari4x4 [ Sat Dec 25, 2010 12:30 pm ] |
| Post subject: | Re: vitara cv's |
this thread might help... http://auszookers.com/index.php?name=Fo ... 094#291094 |
|
| Author: | mighty_vites [ Sat Dec 25, 2010 6:52 pm ] |
| Post subject: | Re: vitara cv's |
 perfect
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|