auszookers.com
https://auszookers.com/forum/

JIMNY & CARBY VITARA for parts templating
https://auszookers.com/forum/viewtopic.php?f=8&t=18406		 Page 1 of 2
Author:  Fatzook [ Thu Jan 20, 2011 11:51 am ]
Post subject:  JIMNY & CARBY VITARA for parts templating
Yep. I need to borrow these models for a day so I can do some measuring for sliders, Bullbars, and a few other things.

This may require me to remove the bumper etc, but I ensure that no damage will be done, and that it will be as you left it upon its return.

Donors will be compensated for their time. :wink:

Brisbane area only please.

PM for details.

Cheers.
Peter
Author:  monley [ Thu Jan 20, 2011 11:55 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
How far away are the arms?
Author:  atari4x4 [ Thu Jan 20, 2011 11:55 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
TSOR Armsup can't wait to see the 2011 product line up!
Author:  Fatzook [ Thu Jan 20, 2011 12:02 pm ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
atari4x4 wrote:
TSOR Armsup can't wait to see the 2011 product line up!


I had the SV appart today :wink: :twisted:
Author:  Fatzook [ Thu Jan 20, 2011 12:04 pm ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
monkey wrote:
How far away are the arms?


From you? 4682.1km :lol:
Author:  monley [ Thu Jan 20, 2011 12:07 pm ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
Fatzook wrote:
monkey wrote:
How far away are the arms?


From you? 4682.1km :lol:


Argh Thanks now i know.
Author:  89_tintop [ Thu Jan 20, 2011 6:30 pm ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
you can have my jimny mate
Author:  Fatzook [ Thu Jan 20, 2011 9:18 pm ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
monkey wrote:
Fatzook wrote:
monkey wrote:
How far away are the arms?


From you? 4682.1km :lol:


Argh Thanks now i know.


Georaphicly speaking :wink:
Author:  Fatzook [ Thu Jan 20, 2011 10:36 pm ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
89_tintop wrote:
you can have my jimny mate


Cool! How can I get my hands on it? :twisted:
Author:  monley [ Thu Jan 20, 2011 10:37 pm ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
Fatzook wrote:
monkey wrote:
Fatzook wrote:
monkey wrote:
How far away are the arms?


From you? 4682.1km :lol:


Argh Thanks now i know.


Georaphicly speaking :wink:



Ok how far away the arms in terms of been on sale,E.g. weeks, months, days and hours?
Author:  Fatzook [ Thu Jan 20, 2011 10:39 pm ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
monkey wrote:
Fatzook wrote:
monkey wrote:
Fatzook wrote:
monkey wrote:
How far away are the arms?


From you? 4682.1km :lol:


Argh Thanks now i know.


Georaphicly speaking :wink:



Ok how far away the arms in terms of been on sale,E.g. weeks, months, days and hours?


Wel I almost have a working sample. Then it needs a test fir, which is one of the reasons why I need a vehicle for a day, then I need to submit it for testing. After that, I have no idea how long it will take :?
Author:  monley [ Thu Jan 20, 2011 10:40 pm ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
Fatzook wrote:
monkey wrote:
Fatzook wrote:
monkey wrote:
Fatzook wrote:
monkey wrote:
How far away are the arms?


From you? 4682.1km :lol:


Argh Thanks now i know.


Georaphicly speaking :wink:



Ok how far away the arms in terms of been on sale,E.g. weeks, months, days and hours?


Wel I almost have a working sample. Then it needs a test fir, which is one of the reasons why I need a vehicle for a day, then I need to submit it for testing. After that, I have no idea how long it will take :?



I'm happy with that answer. :woohoo:
Author:  monley [ Fri Jan 21, 2011 2:02 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
What size lift are the arms going to correct the castor for?

80mm lift?
Author:  tombutt [ Fri Jan 21, 2011 5:08 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
Fatzook wrote:
atari4x4 wrote:
TSOR Armsup can't wait to see the 2011 product line up!


I had the SV appart today :wink: :twisted:



and it was back together today cuz i saw it and good to see yours it getting pulled apart and not mine


but i reckon mine is quicker to get apart less bolts
Author:  Fatzook [ Fri Jan 21, 2011 5:34 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
tombutt wrote:
Fatzook wrote:
atari4x4 wrote:
TSOR Armsup can't wait to see the 2011 product line up!


I had the SV appart today :wink: :twisted:



and it was back together today cuz i saw it and good to see yours it getting pulled apart and not mine


but i reckon mine is quicker to get apart less bolts


Have the seats out ATM. Measuring up some seat mounting brackets for ma new seats :wink:

I thought about doing a kit, but people would have to buy certain seats, or allow me time to modify my mounts to suit. :?

ANd vits aren't that hard to do seat swaps into :wink: Coilys however :x
Author:  Fatzook [ Fri Jan 21, 2011 5:36 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
No SWB vits out there? :(


You'd better volunteer now, or I might have to steal yours from your driveway while you're asleep :lol:
Author:  tombutt [ Fri Jan 21, 2011 5:37 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
what seats u going with? chances of you making two sets?

saw u today near newmarket coles
Author:  Fatzook [ Fri Jan 21, 2011 5:38 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
tombutt wrote:
what seats u going with? chances of you making two sets?


The last 2 of their kind :(
Author:  atari4x4 [ Fri Jan 21, 2011 5:38 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
Fatzook wrote:
Have the seats out ATM. Measuring up some seat mounting brackets for ma new seats :wink:

I thought about doing a kit, but people would have to buy certain seats, or allow me time to modify my mounts to suit.


what flavoured seats are you planning to run? :wink:
Author:  steak_knife [ Fri Jan 21, 2011 6:45 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
I have a jim you can strip...
Author:  89_tintop [ Fri Jan 21, 2011 7:03 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
steak_knife wrote:
I have a jim you can strip...


Im giving him mine :wink: :wink:
Author:  Rusho [ Fri Jan 21, 2011 7:12 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
Fatzook wrote:
Coily's however :x


That reminds me....I have some seats here :twisted:
Author:  steak_knife [ Fri Jan 21, 2011 7:18 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
89_tintop wrote:
steak_knife wrote:
I have a jim you can strip...


Im giving him mine :wink: :wink:


May have to come round & have a looky while it's up ere.. :P
Author:  89_tintop [ Fri Jan 21, 2011 8:23 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
It will be there till Wednesday... Don't need it for a few days
Author:  steak_knife [ Fri Jan 21, 2011 8:25 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
89_tintop wrote:
It will be there till Wednesday... Don't need it for a few days


It's going to look funny with my wheel's & suspension under it... :lol:
Author:  Fatzook [ Fri Jan 21, 2011 8:37 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
steak_knife wrote:
89_tintop wrote:
It will be there till Wednesday... Don't need it for a few days


It's going to look funny with my wheel's & suspension under it... :lol:


I might slap the 20's on just to see how it looks :lol:
Author:  89_tintop [ Fri Jan 21, 2011 8:38 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
steak_knife wrote:
89_tintop wrote:
It will be there till Wednesday... Don't need it for a few days


It's going to look funny with my wheel's & suspension under it... :lol:


hahahahaha


yet it will.
Author:  89_tintop [ Fri Jan 21, 2011 8:41 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
Fatzook wrote:
steak_knife wrote:
89_tintop wrote:
It will be there till Wednesday... Don't need it for a few days


It's going to look funny with my wheel's & suspension under it... :lol:


I might slap the 20's on just to see how it looks :lol:


you have to take pics ;-)
Author:  Fatzook [ Fri Jan 21, 2011 8:42 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
89_tintop wrote:
Fatzook wrote:
steak_knife wrote:
89_tintop wrote:
It will be there till Wednesday... Don't need it for a few days


It's going to look funny with my wheel's & suspension under it... :lol:


I might slap the 20's on just to see how it looks :lol:


you have to take pics ;-)


Yep :wink:
Author:  steak_knife [ Fri Jan 21, 2011 8:43 am ]
Post subject:  Re: JIMNY & CARBY VITARA for parts templating
Fatzook wrote:
steak_knife wrote:
89_tintop wrote:
It will be there till Wednesday... Don't need it for a few days


It's going to look funny with my wheel's & suspension under it... :lol:


I might slap the 20's on just to see how it looks :lol:


Do you still have the 3 spoke 16's???
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/