auszookers.com
https://auszookers.com/forum/

WTB: 12 bolt 5.12 rear diff, Passenger side SV Vitara axle
https://auszookers.com/forum/viewtopic.php?f=8&t=18668		 Page 1 of 1
Author:  ninjamoses [ Sun Jan 30, 2011 6:15 am ]
Post subject:  WTB: 12 bolt 5.12 rear diff, Passenger side SV Vitara axle
As per the title, chasing a passenger side rear axle out of a SV model Vitara.

Also chasing a 5.12 12 bolt rear diff (just need the R&P and the passenger side side gear and part of the carrier, but will take the whole third member if need be).

Figured I may as well do the wheel bearings while I'm at it, so if anyone knows the cheapest source for them that would be great also. Think I remember someone on here was able to get them.

cheers,
Kris
Author:  shane1992 [ Sun Jan 30, 2011 8:38 am ]
Post subject:  Re: WTB: 12 bolt 5.12 rear diff, Passenger side SV Vitara axle
I got a whole diff/axle on 1991 LWB Vit ????
Author:  gregdixon [ Sun Jan 30, 2011 8:55 am ]
Post subject:  Re: WTB: 12 bolt 5.12 rear diff, Passenger side SV Vitara ax
http://www.jeep4x4center.com/jeep-bumpe ... CAL-SK5038

5.8's might be a bit to much for a daily???? Or you could just put bigger tyres on.
Author:  ninjamoses [ Sun Jan 30, 2011 9:05 am ]
Post subject:  Re: WTB: 12 bolt 5.12 rear diff, Passenger side SV Vitara ax
Cheers shane, unfortunately that will be a 10 bolt. Pretty sure they went to 12 bolt in 94.

The 5.83 R&Ps stopped being made years ago apparently Greg from what I have read. Cant even get them from calmini themselves anymore. Think the jeep place needs to update its website.

From what I've been reading the 10 bolt centre bolts straight into my housing. Starting to wonder if I should just throw the locker into that centre and be done with it. Hrmmm.
Author:  atari4x4 [ Sun Jan 30, 2011 9:10 am ]
Post subject:  Re: WTB: 12 bolt 5.12 rear diff, Passenger side SV Vitara axle
bearings = weaves

let me know if you want to off load the 10 bolt.
Author:  gregdixon [ Sun Jan 30, 2011 9:12 am ]
Post subject:  Re: WTB: 12 bolt 5.12 rear diff, Passenger side SV Vitara ax
What is your standard gearing???

Swapping to 10 bolt would be the easiest, then you only need an axle and swap the front gears over.

I might just go for some 4.8's out of an auto GV, newer car should have gears in better condition.
Author:  ninjamoses [ Sun Jan 30, 2011 9:19 am ]
Post subject:  Re: WTB: 12 bolt 5.12 rear diff, Passenger side SV Vitara axle
atari4x4 wrote:
bearings = weaves

let me know if you want to off load the 10 bolt.


Ahh yes, that rings a bell. Cheers dude.

If I sell her I'll let Joe have first dibs on the centre mate as he sold it to me for a good price to begin with. If he doesnt want it (find out tomorrow) then its all yours.

Gah now I dont know whether to use it or sell it haha. :?

I always forget what the standard SV ratios are Greg. They are either 4.6x or 4.8x. Get the feeling they are 4.88s. If they are 4.8x want to buy mine haha?
Author:  gregdixon [ Sun Jan 30, 2011 9:27 am ]
Post subject:  Re: WTB: 12 bolt 5.12 rear diff, Passenger side SV Vitara ax
I would be interested :)
Author:  Mugwui [ Sun Jan 30, 2011 10:23 am ]
Post subject:  Re: WTB: 12 bolt 5.12 rear diff, Passenger side SV Vitara axle
I've got both left & right axels from a 95 SWB Vit, 26 spline, not sure what the SV is though. I've also got a front 4.3 R&P if your looking.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/