[Rhino]

Hey guys
Im just chasing a front crownwheel and pinion out of an auto vitara (4.6) for my sierra build.
If its still fitted to a diff center thats even better.
I know of one, so only realy looking for a second or i'll just have to run with my 3.9s

Let me know what you've got either with a pm or reply here.

Cheers Ryan

[Fatzook]

Front diff from Manual SV420 and SV620 is also 4.6 ratio

[Rhino]

Fatzook wrote:

Front diff from Manual SV420 and SV620 is also 4.6 ratio

Cool thanks mate. My knowledge of vitaras is quite limited.
If anyone has one of the ones fatzook mentioned i'll quite happily grab that off you as well

[mondo]

i've got a 1996 vitara sitting here, im not sure of its diff ratio's but if you want it its here

[buzbox]

I've got a GV crown wheel and pinion, any good?

[Rhino]

mondo wrote:

i've got a 1996 vitara sitting here, im not sure of its diff ratio's but if you want it its here

Is it a 1.6? manual or auto?
thanks

buzbox wrote:

I've got a GV crown wheel and pinion, any good?

Im not exacly sure. I'll try and do a little research and let you know

[Fatzook]

buzbox wrote:

I've got a GV crown wheel and pinion, any good?

Count the teeth on both gears.

[mondo]

hey rhino its a manual

[Highway-Star]

If you can't find one; you could consider buying 2 of these brand new:
http://www.lowrangeoffroad.com/suzuki/s ... gears.html

Nearly the same ratio.

[buzbox]

Actually, The one I have might be the one you want, Removed from my vitara from when I did the steel diff conversion, but it's in very 2nd hand condition, It was covered in mud, I've cleaned it up but has been left outside for a few months, It might still be usable if you give it a thorough clean up.

Pinion = 8
Crown wheel = 41

[tanshi]

salisbury wreckers have an sv420 in there

[Fatzook]

buzbox wrote:

Actually, The one I have might be the one you want, Removed from my vitara from when I did the steel diff conversion, but it's in very 2nd hand condition, It was covered in mud, I've cleaned it up but has been left outside for a few months, It might still be usable if you give it a thorough clean up.

Pinion = 8
Crown wheel = 41

41/8= 5.125

[coneykid]

I've got two 5.12 diff centers.

[Rhino]

mondo wrote:

hey rhino its a manual

arr bugger im pretty sure thats 5.12, altho its starting to look like they are a little easier to find so i'll let you know if i decided to go with that.

Highway-Star wrote:

If you can't find one; you could consider buying 2 of these brand new:
http://www.lowrangeoffroad.com/suzuki/s ... gears.html

Nearly the same ratio.

Thanks Aaron, they seem pretty good but maybe a little too pricey for me at the moment. Im starting to run out of money and most of its been going to that shop....

coneykid wrote:

I've got two 5.12 diff centers.

Cheers for the offer mate. Im more looking for 4.6s but if i cant find another one I'll let you know,and might hit you up for one or both.

[Brett]

if you can wait about 2 weeks i'll have one as i'm putting 5:12 in my auto vitara

[Rhino]

Brett wrote:

if you can wait about 2 weeks i'll have one as i'm putting 5:12 in my auto vitara

Yeah i can wait 2 weeks mate if you dont mind postage.