| auszookers.com https://auszookers.com/forum/ |
|
| 308 or 253 holden motors and t400 box https://auszookers.com/forum/viewtopic.php?f=8&t=20993 |
Page 1 of 1 |
| Author: | airzook [ Thu Apr 14, 2011 5:57 am ] |
| Post subject: | 308 or 253 holden motors and t400 box |
hey guys am looking for holden 308 or 253 motor complete gas would be good but not worried and a turbo 400 auto box. for my build its going in a GQ chassis with an 89 vit body. would be good if in or close to melbourne |
|
| Author: | want33s [ Thu Apr 14, 2011 6:32 am ] |
| Post subject: | Re: 308 or 253 holden motors and t400 box |
Are you on drugs? If you must have a GM(H) V8, buy a VN-VP-VR and get the 304/TH700 with EFI.... They are so cheap. |
|
| Author: | airzook [ Thu Apr 14, 2011 7:54 am ] |
| Post subject: | Re: 308 or 253 holden motors and t400 box |
i wish i was, there tuff and run upside down when on gas i also have 2 turbo manifolds and t28 hiflo turbos to suit in the future its a massive build up will start to post pics thisweekend ah |
|
| Author: | airzook [ Sat Apr 16, 2011 12:53 am ] |
| Post subject: | Re: 308 or 253 holden motors and t400 box |
come on guys there has to be something floating about |
|
| Author: | sleeperzook [ Sat Apr 16, 2011 5:35 am ] |
| Post subject: | Re: 308 or 253 holden motors and t400 box |
http://adelaide.gumtree.com.au/c-Cars-V ... Z258122438 I spoke to the guy and he's just sold the gearbox. Reckon's he'd take $800 for the engine and gas set up. |
|
| Author: | Brett [ Sat Apr 16, 2011 7:39 am ] |
| Post subject: | Re: 308 or 253 holden motors and t400 box |
the local wrecker would be best. if your going to run big boost stick the the 253, they have a lot thicker metal around the webbing and cylinders. the turbo 308 i built years ago started to crack around the mains and bottom of the cylinders. but saying that i'd go the buick ( vn to vr) v6. made more power, than a 308 ever did and take boost very well. i have a mate in canberra thats making about 290 kw but about 680 nm toque ( doesn't rev very hard cause of the springs in it) on stock internals. is been going for 4 years as a daily now |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|