auszookers.com :: View topic - Jimny Extractors and exhaust supplier in Perth

^^ yep those ones should do the trick :wink:

i went to see mettams in belmont, you're right about the price - very reasonable. seems like a decent bloke.

however i rang brian gardners, where - regrettably i bought the jimny - and they were rude and belligerent at the mere suggestion of fitting extractors, even argumentative! obviously it was a to show me the level of support and style of negotiation i would encounter if ever anything did go wrong.

but, seeing a i dont trust them one iota anyway i reckon i have nothing to lose. already with minor things they have been pretty poor. they treat suzuki buyers as 2nd class citizens, they are all about holdens

I got everything...extractors/hi flo cat/muffler/exhaust.
Sounds great. I got a hot dog as well to quieten things down (I'm old) :-)

and better economy.

I am curious about the time lag, 3 months, I would have expected the difference to be immediate. i have fitted them to other cars too, but never a new one.

Cheers MacBear, not sure how old is old around here. Being 45 seems old at times - just ask my kids

The last car I really worked over was yonks ago, stroked 6 in a LC Torana.

I had a Sierra a few years back but the family out grew it. They have all gone now so I am back to a car that fits me

What you said about the ECU makes sense. I don't thrash it, but I expect it to motivate.

As for fuel I always run it on 98 ULP.

Two recent trips, one to Newman and then out behind Southern Cross seem to have loosened the motor up. Went to the Die Hardy ranges behind Bullfinch, all rocks and sand. That made it work a bit. It went beautifully.

Love my Suzi!

another reason for the extractors, every little bit helps. mostly i am looking to extend the vehicle's reach. hopefully go further on same fuel or carry less.

when you're getting back into town with 10l in the tank and each town is 15-20l apart you are cutting it fine. got caught like that at paynes find on the newman trip. they were shut due to storm damage, no signs at magnet or wubin. luckily they caretaker allowed me to siphon 10l from his F100.

Ceramic coated Wildcat extractors on my 2008 Jimny. Just hit 49 and NOT looking forward to turning 50.

did it cost much to get them coated? mettams said they wanted to weld on a flange to the extractors before coating.

looks very nice btw.

Kennel wrote:

Yep, you have to push less on the go peddle to maintain the same speed, with a good exhaust system...
Jeez, you should carry at least one 20L Jerry can if your going out there... when were you last at Paynes Find ?, used to prospecting out there, he he, is that guy still selling his stone sculptures ? :wink:

MacBear wrote:

Kennel wrote:

Do you you detect Macbear. You are in the best state. Vic is flogged.

Author:	Kennel [ Tue May 17, 2011 4:50 am ]
Post subject:	Jimny Extractors and exhaust supplier in Perth
Hi all I see lots of posts where people have fitted extractors and various exhausts to Jimny's. Mine is a 2010 model. Having a bit of trouble tracking down a supplier in Perth, preferably in the Cannington/South Perth area. Although Midland at a stretch. Any recommendations? Cheers

Author:	monley [ Tue May 17, 2011 7:32 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Suzi store, But make sure you get these ones, http://www.suzistore.com.au/shopexd.asp?id=1857 Not the other $330 cus they are not the right ones. Exhaust: Any Muffler center should be able to do one in 2", with high flow cat and hi-flow muffler.

Author:	tim80z [ Tue May 17, 2011 7:40 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Don't know if these are any good but they have just popped up on eBay. http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260785684104 - $225 - Tim.

Author:	monley [ Tue May 17, 2011 7:42 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
^^ yep those ones should do the trick

Author:	smiffkid [ Tue May 17, 2011 9:51 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
mettams muffler in morley did mine, pretty cheap and thats a 2 inch pipe with a hot dog and extractors

auszookers.com https://auszookers.com/forum/

Jimny Extractors and exhaust supplier in Perth https://auszookers.com/forum/viewtopic.php?f=8&t=22021	Page 1 of 2

Author:	Kennel [ Tue May 17, 2011 2:16 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
thanks for your replies, i've now got something to go on. those suzistore ones look just like the genie wildcats

Author:	Kennel [ Wed May 18, 2011 3:57 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
I rang mettams in belmont today, seemed pretty helpful. might be onto something here, thanks

Author:	BertZook [ Wed May 18, 2011 11:28 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
monkey wrote: ^^ yep those ones should do the trick not really... it would do the trick for early jimnys, but not sure if theyd do for current models

Author:	monley [ Thu May 19, 2011 6:59 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
They have the little pipe coming of the last pipe and that's for the EGR thingy, which i don't think the early model extractors had

Author:	Kennel [ Sat May 21, 2011 2:24 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
i went to see mettams in belmont, you're right about the price - very reasonable. seems like a decent bloke. however i rang brian gardners, where - regrettably i bought the jimny - and they were rude and belligerent at the mere suggestion of fitting extractors, even argumentative! obviously it was a to show me the level of support and style of negotiation i would encounter if ever anything did go wrong. but, seeing a i dont trust them one iota anyway i reckon i have nothing to lose. already with minor things they have been pretty poor. they treat suzuki buyers as 2nd class citizens, they are all about holdens

Author:	Fatzook [ Sat May 21, 2011 2:30 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Kennel wrote: i went to see mettams in belmont, you're right about the price - very reasonable. seems like a decent bloke. however i rang brian gardners, where - regrettably i bought the jimny - and they were rude and belligerent at the mere suggestion of fitting extractors, even argumentative! obviously it was a to show me the level of support and style of negotiation i would encounter if ever anything did go wrong. but, seeing a i dont trust them one iota anyway i reckon i have nothing to lose. already with minor things they have been pretty poor. they treat suzuki buyers as 2nd class citizens, they are all about holdens Well they've got that completely arse about haven't they?

Author:	Kennel [ Sat May 21, 2011 9:45 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
you bet, mine is fairly straight. nudge bar for spotties and aerial, cooper ATR's but it drew a group of people away from a HSV dunniedoor when it went in for its 1000km service. because it looked like a fun machine to drive - and it is the HSV owner even remarked on it.

Author:	gjb977 [ Sat May 21, 2011 11:49 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Wildcat #294 are the ones to get (I have a set in my 2010 Jimny)

Author:	Kennel [ Sat May 21, 2011 11:53 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
ha, your initials are the same as mine - gjb did you notice much difference? obviously you weren't worried about the warranty either. all they want to do is extractors and high flow stainless steel muffler. apparently the rest of the system is stainless.

Author:	gjb977 [ Sat May 21, 2011 9:41 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
The sound obviously is immediate. I too drove live a granny originally and I suppose now I love the sound so much I tend to to hit 4,000 -> 4,500 RPM a hell of a lot more than I used to. haha. And I've also used Hi Octane fuel all the time. I filled up yesterday @ $1.53 per litre wtf !! you old codgers - I'm a sprightly 40 year old.

Page 1 of 2	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	gjb977 [ Sat May 21, 2011 12:15 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
I got everything...extractors/hi flo cat/muffler/exhaust. Sounds great. I got a hot dog as well to quieten things down (I'm old) More noticeable after about 3 months after installation. Seems to be better on hills (still sucks though) and better economy.

Author:	gjb977 [ Sat May 21, 2011 12:17 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Every car I've owned I've had extractors/exhaust installed. (corolla, 323, 929turbo, 300ZX, Mustang, Skyline...and now the best of them all...The Jimny)

Author:	Kennel [ Sat May 21, 2011 1:15 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
I am curious about the time lag, 3 months, I would have expected the difference to be immediate. i have fitted them to other cars too, but never a new one.

Author:	MacDaddy [ Sat May 21, 2011 2:15 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
gjb977 wrote: I got everything...extractors/hi flo cat/muffler/exhaust. Sounds great. I got a hot dog as well to quieten things down (I'm old) and better economy. X 2 Got everything as well, except a Hot dog, i am old too, but i like the noise ! And yes i get better economy as well... Kennel wrote: I am curious about the time lag, 3 months, I would have expected the difference to be immediate. i have fitted them to other cars too, but never a new one. It took about 3 to 4 weeks till i noticed any noticable improvement... ahhh well, you see stock exhausts are very restrictive, they are designed to recirculate burnt exhaust gases... this can clog up the combustion chamber in deposits, that need to be cleaned out a bit first... but if yours is a fairly new engine, you may feel a difference straight away... also, the ECU remembers your driving habits, if you drive like a granny, it will remember, and you may not feel much difference, if you drive like you have a bit of a heavy foot, it remembers, and you will feel the difference more... i drove my GV like a granny when i first got it, then i had the sports system put on, it sounds so good now, i like to drive it at higher RPM's, and after 3 or 4 weeks, i noticed a big difference... also, if your feeding your Zook standard unleaded, i recommend switching to Premium Unleaded, the Zook engine loves it ! I also run some Fuel System Treatment every 3rd refill, it cleans the whole system, as well as the injectors...

Author:	Kennel [ Sat May 21, 2011 2:33 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Cheers MacBear, not sure how old is old around here. Being 45 seems old at times - just ask my kids The last car I really worked over was yonks ago, stroked 6 in a LC Torana. I had a Sierra a few years back but the family out grew it. They have all gone now so I am back to a car that fits me What you said about the ECU makes sense. I don't thrash it, but I expect it to motivate. As for fuel I always run it on 98 ULP. Two recent trips, one to Newman and then out behind Southern Cross seem to have loosened the motor up. Went to the Die Hardy ranges behind Bullfinch, all rocks and sand. That made it work a bit. It went beautifully. Love my Suzi!

Author:	MacDaddy [ Sat May 21, 2011 3:08 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Kennel wrote: Cheers MacBear, not sure how old is old around here. Being 45 seems old at times - just ask my kids The last car I really worked over was yonks ago, stroked 6 in a LC Torana. I had a Sierra a few years back but the family out grew it. They have all gone now so I am back to a car that fits me What you said about the ECU makes sense. I don't thrash it, but I expect it to motivate. As for fuel I always run it on 98 ULP. Two recent trips, one to Newman and then out behind Southern Cross seem to have loosened the motor up. Went to the Die Hardy ranges behind Bullfinch, all rocks and sand. That made it work a bit. It went beautifully. Love my Suzi! Well i am 49, very soon to be 50, ha ha... but i dont feel 50 ! Yep, 98 is better than Premium, but with fuel prices as they are, Premium is all i can afford... Going on what i was told when i bought my first Sierra new, its short tips at high RPM, that are best for new motor, long trips at a constant speed, dont do much for a new engine... but yeah, in Low Range in the sand is good... So when are we gonna see you out on a trip ?

Author:	Kennel [ Sat May 21, 2011 11:44 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
another reason for the extractors, every little bit helps. mostly i am looking to extend the vehicle's reach. hopefully go further on same fuel or carry less. when you're getting back into town with 10l in the tank and each town is 15-20l apart you are cutting it fine. got caught like that at paynes find on the newman trip. they were shut due to storm damage, no signs at magnet or wubin. luckily they caretaker allowed me to siphon 10l from his F100.

Author:	hermsie62 [ Sun May 22, 2011 3:34 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Ceramic coated Wildcat extractors on my 2008 Jimny. Just hit 49 and NOT looking forward to turning 50.

Author:	Kennel [ Sun May 22, 2011 5:07 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
did it cost much to get them coated? mettams said they wanted to weld on a flange to the extractors before coating. looks very nice btw.

Author:	MacDaddy [ Sun May 22, 2011 6:47 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Kennel wrote: another reason for the extractors, every little bit helps. mostly i am looking to extend the vehicle's reach. hopefully go further on same fuel or carry less. when you're getting back into town with 10l in the tank and each town is 15-20l apart you are cutting it fine. got caught like that at paynes find on the newman trip. they were shut due to storm damage, no signs at magnet or wubin. luckily they caretaker allowed me to siphon 10l from his F100. Yep, you have to push less on the go peddle to maintain the same speed, with a good exhaust system... Jeez, you should carry at least one 20L Jerry can if your going out there... when were you last at Paynes Find ?, used to prospecting out there, he he, is that guy still selling his stone sculptures ?

Author:	MacDaddy [ Sun May 22, 2011 6:53 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
hermsie62 wrote: Ceramic coated Wildcat extractors on my 2008 Jimny. Just hit 49 and NOT looking forward to turning 50. Nice... age is just a number, your only as old as you feel ! I stopped celebrating bithdays once i got to 45, who wants to be reminded of how old you are... not me...

Author:	Kennel [ Sun May 22, 2011 7:44 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Just a couple of weeks ago on my way back from newman, i had already used up 30l in jerry can fuel, went past magnet thinking i'd get fuel in paynes find as i had a mate who lived just out of town, failed on both counts. no fuel and he'd moved. lesson here, dont drive past a bowser with an empty jerry can

Author:	hermsie62 [ Sun May 22, 2011 10:45 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
Kennel wrote: did it cost much to get them coated? mettams said they wanted to weld on a flange to the extractors before coating. looks very nice btw. $250 for the coating and got the flange welded on first. Bit of a pain but worth it.

Author:	hermsie62 [ Sun May 22, 2011 10:48 am ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
MacBear wrote: Kennel wrote: another reason for the extractors, every little bit helps. mostly i am looking to extend the vehicle's reach. hopefully go further on same fuel or carry less. when you're getting back into town with 10l in the tank and each town is 15-20l apart you are cutting it fine. got caught like that at paynes find on the newman trip. they were shut due to storm damage, no signs at magnet or wubin. luckily they caretaker allowed me to siphon 10l from his F100. Yep, you have to push less on the go peddle to maintain the same speed, with a good exhaust system... Jeez, you should carry at least one 20L Jerry can if your going out there... when were you last at Paynes Find ?, used to prospecting out there, he he, is that guy still selling his stone sculptures ? Do you you detect Macbear. You are in the best state. Vic is flogged.

Author:	MacDaddy [ Sun May 22, 2011 1:16 pm ]
Post subject:	Re: Jimny Extractors and exhaust supplier in Perth
hermsie62 wrote: MacBear wrote: Kennel wrote: another reason for the extractors, every little bit helps. mostly i am looking to extend the vehicle's reach. hopefully go further on same fuel or carry less. when you're getting back into town with 10l in the tank and each town is 15-20l apart you are cutting it fine. got caught like that at paynes find on the newman trip. they were shut due to storm damage, no signs at magnet or wubin. luckily they caretaker allowed me to siphon 10l from his F100. Yep, you have to push less on the go peddle to maintain the same speed, with a good exhaust system... Jeez, you should carry at least one 20L Jerry can if your going out there... when were you last at Paynes Find ?, used to prospecting out there, he he, is that guy still selling his stone sculptures ? Do you you detect Macbear. You are in the best state. Vic is flogged. I used to detect... havnt done it for at least 20 years now... but i loved doing it... i have an old Whites Discriminator, but it still works great... never found any gold, but found a few old coins from around the old miners camps... i imagine there would be a fair bit of surface and Alluvial gold now, after 20 years of erosion from weather etc...