bede wrote:
talk to fatzuk
Who's that?
| auszookers.com https://auszookers.com/forum/ |
|
| Sliders https://auszookers.com/forum/viewtopic.php?f=8&t=22188 |
Page 1 of 1 |
| Author: | maloo11 [ Mon May 23, 2011 2:03 am ] |
| Post subject: | Sliders |
Looking for set of sliders to suit WT sierra PM me |
|
| Author: | bede [ Mon May 23, 2011 2:34 am ] |
| Post subject: | Re: Sliders |
talk to fatzuk |
|
| Author: | Fatzook [ Mon May 23, 2011 2:51 am ] |
| Post subject: | Re: Sliders |
bede wrote: talk to fatzuk
Who's that?
|
|
| Author: | JrZook [ Mon May 23, 2011 2:56 am ] |
| Post subject: | Re: Sliders |
Fatzook wrote: bede wrote: talk to fagzuk Who's that? Must be rusho or tombutt 
|
|
| Author: | Rusho [ Mon May 23, 2011 3:07 am ] |
| Post subject: | Re: Sliders |
JrZook wrote: Fatzook wrote: bede wrote: talk to fagzuk Who's that? Must be rusho or tombutt Piss off homo....go polish your chassis rail or something 
|
|
| Author: | Damo [ Mon May 23, 2011 3:15 am ] |
| Post subject: | Re: Sliders |
I Rusho wrote: JrZook wrote: Fatzook wrote: bede wrote: talk to fagzuk Who's that? Must be rusho or tombutt Piss off homo....go polish your chassis rail or something haha pot this is kettle |
|
| Author: | Fatzook [ Mon May 23, 2011 3:19 am ] |
| Post subject: | Re: Sliders |
Damo wrote: I
Rusho wrote: JrZook wrote: Fatzook wrote: bede wrote: talk to fagzuk Who's that? Must be rusho or tombutt Piss off homo....go polish your chassis rail or something haha pot this is kettle
|
|
| Author: | Rusho [ Mon May 23, 2011 3:19 am ] |
| Post subject: | Re: Sliders |
Damo wrote: I
Rusho wrote: JrZook wrote: Fatzook wrote: bede wrote: talk to fagzuk Who's that? Must be rusho or tombutt Piss off homo....go polish your chassis rail or something haha pot this is kettle No one asked you Mr.Damo 
|
|
| Author: | tanshi [ Mon May 23, 2011 6:02 am ] |
| Post subject: | Re: Sliders |
I have a set for sale. $100 |
|
| Author: | Bruce [ Mon May 23, 2011 6:10 am ] |
| Post subject: | Re: Sliders |
tanshi wrote: I have a set for sale. $100
Are they made by fatzuk 
|
|
| Author: | Fatzook [ Mon May 23, 2011 6:21 am ] |
| Post subject: | Re: Sliders |
Bruce wrote: tanshi wrote: I have a set for sale. $100 Are they made by fatzuk I wouldn't think so 
|
|
| Author: | tanshi [ Mon May 23, 2011 6:41 am ] |
| Post subject: | Re: Sliders |
Nope, not chubbysook either 
|
|
| Author: | bede [ Mon May 23, 2011 7:25 am ] |
| Post subject: | Re: Sliders |
my bad sorry |
|
| Author: | jase84 [ Sat May 28, 2011 8:00 am ] |
| Post subject: | Re: Sliders |
make them ya self man, cost ya $55 for tha steel then bend an weld.. 100mm x100mm x 6mm angleiron length of seals, then sum 1inch or so pipe an bend to wot you want to look like, weld it strait to cab, an seal all up so doesnt rust, or do as i hav an put a lil pipe in so you can fish oil it or jst good old sump oil in it, wot ever stops tha rust. ill try an put sum pics up |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|