| auszookers.com https://auszookers.com/forum/ |
|
| WT : Vit Power Steer Box https://auszookers.com/forum/viewtopic.php?f=8&t=22346 |
Page 1 of 1 |
| Author: | Rusho [ Sat May 28, 2011 9:33 pm ] |
| Post subject: | WT : Vit Power Steer Box |
Hi All, As title suggests. Preferably in a condition that suits rebuild (cheap  ) as I have the lowrange seal kit and want to have a crack at rebuilding one.
You can even have my old leaky one back after I finish with it.. 
PM me if you can help out. Cheers Rusho |
|
| Author: | 31zook [ Sat May 28, 2011 11:10 pm ] |
| Post subject: | Re: WT : Vit Power Steer Box |
hey rusho, your going to find that this is different from anything else you have done, there is a spiral ball bearing system on the ram, that it a bugger to get in again make sure your slow/methodical and put the BB's in a spot where they can't be lost. (or in my case i used a icecream container and i managed to drop the ram on icecream container and fly my 30BB's across the shed  ) and you need to pull this apart to get to some more important seals. good luck 
|
|
| Author: | Rusho [ Sat May 28, 2011 11:13 pm ] |
| Post subject: | Re: WT : Vit Power Steer Box |
Precisely why I want another one It would be my luck that I take out the one in it and the thing implodes bb's everywhere. That, and it would make my car kind of hard to drive to work without a steering box 
Any other tips 31zook 
|
|
| Author: | steak_knife [ Sat May 28, 2011 11:26 pm ] |
| Post subject: | Re: WT : Vit Power Steer Box |
Rusho wrote: Any other tips  Pay some prick that knows what they are doing to do it.....
|
|
| Author: | Rusho [ Sat May 28, 2011 11:33 pm ] |
| Post subject: | Re: WT : Vit Power Steer Box |
steak_knife wrote: Rusho wrote: Any other tips Pay some prick that knows what they are doing to do it..... How much do you want?? When can I bring it over
|
|
| Author: | steak_knife [ Sat May 28, 2011 11:36 pm ] |
| Post subject: | Re: WT : Vit Power Steer Box |
Rusho wrote: steak_knife wrote: Rusho wrote: Any other tips Pay some prick that knows what they are doing to do it..... How much do you want?? When can I bring it over
|
|
| Author: | Rusho [ Sat May 28, 2011 11:56 pm ] |
| Post subject: | Re: WT : Vit Power Steer Box |
steak_knife wrote: Rusho wrote: steak_knife wrote: Rusho wrote: Any other tips Pay some prick that knows what they are doing to do it..... How much do you want?? When can I bring it over
|
|
| Author: | 31zook [ Sun May 29, 2011 9:25 am ] |
| Post subject: | Re: WT : Vit Power Steer Box |
|
The seals are weird also and there is O-rings under most of the hydro seals. and on my box (not sure about your's) where the pitman arm bolts up there is a hydro seal sitting inside of an O-ring, kinda hard to explain, but thats about it. and it will feel really stiff till you use it a bit.... Just like rebuilding a motor, gear box, tcase, diff, be patient, don't do it when your stressed, and take time. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|