| auszookers.com https://auszookers.com/forum/ |
|
| 4.1.1 Crown and pinion geras for NT Maruti https://auszookers.com/forum/viewtopic.php?f=8&t=23116 |
Page 1 of 1 |
| Author: | zookcubr [ Wed Jun 22, 2011 12:12 am ] |
| Post subject: | 4.1.1 Crown and pinion geras for NT Maruti |
Urgently need a rear diff centre for a Maruti NT 4.1.1 as mine is shot. Happy to pay freight if its a decent price, location Wollongong NSW. PM or call me on 0419 638 647 if you can help. |
|
| Author: | zooker [ Wed Jun 22, 2011 8:58 am ] |
| Post subject: | Re: 4.1.1 Crown and pinion geras for NT Maruti |
Are you sure its NT? because I have a spare R&P from a WT maruti, in wollongong too. |
|
| Author: | christover1 [ Wed Jun 22, 2011 9:34 am ] |
| Post subject: | Re: 4.1.1 Crown and pinion geras for NT Maruti |
I have 4:1 NT Sierra diff centres, in Melbourne. Have no idea if they fit Marutis. |
|
| Author: | Fatzook [ Wed Jun 22, 2011 11:07 am ] |
| Post subject: | Re: 4.1.1 Crown and pinion geras for NT Maruti |
If its pre 94 its most likely a 1L NT diff. So ANY 1L diff centre will go straight in. |
|
| Author: | zookcubr [ Thu Jun 23, 2011 7:08 am ] |
| Post subject: | Re: 4.1.1 Crown and pinion geras for NT Maruti |
Thanks guys, yer im running 31s so the ratio is 4.1 on the crown and pinion. There is some good news, ive located a replacement from a diff place in the Gong, reco for $275. Just have to find the time to instal it. As for the actual diff, im pretty sure its a NT 1ltr Sierra as I have another Maruti ute (91) and they are a larger diff centre. Meaning the bastard (91 Maruti diff centre) didnt fit. I was hoping to get to drive it this weekend and now looks like I will. Thanks anyhow. |
|
| Author: | MG410 [ Thu Jun 23, 2011 7:34 am ] |
| Post subject: | Re: 4.1.1 Crown and pinion geras for NT Maruti |
If ever needed I have complete Maruti front NT diff also good R & P rear only side gears are shot, both have the larger 1.3 flanges which is only difference to 1ltr version. Ian |
|
| Author: | hutch [ Thu Jun 23, 2011 8:17 am ] |
| Post subject: | Re: 4.1.1 Crown and pinion geras for NT Maruti |
http://auszookers.com/index.php?name=Fo ... ic&t=19510 I have 2 sets of diffs for sale in sale thread above. These were on my bros LWB 1LT. They may be the larger flanges? |
|
| Author: | zookcubr [ Thu Jun 23, 2011 10:41 am ] |
| Post subject: | Re: 4.1.1 Crown and pinion geras for NT Maruti |
Thanks for your help guys, but ive got it sorted for the time being. Im not sure what the front diff is like yet and may in the future have to sort your help again. Firstly im still not sure what diffs are fitted to my 92 which are very different from my 91 considering they are both Maruti utes 12 months apart, they differ considerably. Strange really. The 92 must have at some stage had a diff change. Im now the 3rd owner and have contact with the previous owner through the nsw suzuki 4wd club. The 91 is in very original condition, and im assuming (ass-you-me) this has been untouched as the diff centres do not fit into the 92 diff. As above when I bought the 92 it has 31s and running the 4.1, the 91 diffs im not sure the ratio. Maybe somebody out there could tell me the diff ratio of a Maruti ute of this period should be and ill go out and count the gears. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|