Stekky
| auszookers.com https://auszookers.com/forum/ |
|
| Please recommend someone to replace GV Clutch Brisbane S/sid https://auszookers.com/forum/viewtopic.php?f=8&t=23498 |
Page 1 of 1 |
| Author: | squirezook [ Sat Jul 02, 2011 8:42 pm ] |
| Post subject: | Please recommend someone to replace GV Clutch Brisbane S/sid |
98 GV clutch replacement Need it done asap. Paying cash South side bris Can you recommend someone and what is it worth?? I'm guessing clutch plate cover thrust bearing and flywheel machine and rear main seal needed. Thanks in advance Matthew |
|
| Author: | beerhound [ Sat Jul 02, 2011 8:46 pm ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
Suzi Auto services 3339 pacific highway springwood 3808 7637 only just started using these guys and found them to be reasonably priced |
|
| Author: | Trent1 [ Sat Jul 02, 2011 9:10 pm ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
Slacks Creek Brake and Clutch 14 Herbert Street Slacks Creek 4127 Ph 38088193 www.slackscreekbc.com.au just off Moss Street. Dad has been using this company for about 30 years for brake parts and shoes and clutchs, machine of flywheels etc Has never had any problems with them and prices are reasonable to. They are open on Saturdays aswell |
|
| Author: | 16ZUK [ Sat Jul 02, 2011 10:11 pm ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
oozuk. pm him on auszookers. he's at bethania. |
|
| Author: | squirezook [ Sun Jul 03, 2011 12:49 am ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
Thanks for the replies will do a ring around Monday morning. |
|
| Author: | oozuk [ Sun Jul 03, 2011 2:53 am ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S/sid |
I will ring around and get some prices on Monday so I can give you an estimate. What motor is in your GV ? |
|
| Author: | squirezook [ Sun Jul 03, 2011 4:16 am ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S/sid |
oozuk wrote: I will ring around and get some prices on Monday so I can give you an estimate. What motor is in your GV ?
Thanks that would be great it is the 2.5 V6 |
|
| Author: | Fatzook [ Sun Jul 03, 2011 5:16 am ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
Stekky
|
|
| Author: | squirezook [ Sun Jul 03, 2011 6:10 am ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
Fatzook wrote: Stekky
Nar he is not keen need a hoist and box lift. He must be out wheeling as haven't seen him in here today |
|
| Author: | steak_knife [ Sun Jul 03, 2011 6:37 am ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
Not keen at all, friggin heavy box's & no room round the tunnel  Mr squire
|
|
| Author: | squirezook [ Sun Jul 03, 2011 7:16 am ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
| back at ya Mr Knife
|
|
| Author: | squirezook [ Sun Jul 03, 2011 9:44 pm ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
Trent1 wrote: Slacks Creek Brake and Clutch
14 Herbert Street Slacks Creek 4127 Ph 38088193 www.slackscreekbc.com.au just off Moss Street. Dad has been using this company for about 30 years for brake parts and shoes and clutchs, machine of flywheels etc Has never had any problems with them and prices are reasonable to. They are open on Saturdays aswell Booked in for tomorrow estimate $700 including Machining and bearings. Thanks Matt |
|
| Author: | steak_knife [ Mon Jul 04, 2011 6:22 am ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
 That's a good price.....
|
|
| Author: | squirezook [ Tue Jul 05, 2011 10:27 am ] |
| Post subject: | Re: Please recommend someone to replace GV Clutch Brisbane S |
Well car is not back on the road yet . Previous owner has messed with it . clutch fork not original. different bearing and it had a drill bit as a push rod between the fork and slave cylinder. So now chasing original parts. See new topic.... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|